Heil Quaker ICP 1149463 Burner Kit
The Heil Quaker ICP 1149463 Burner Kit is a critical OEM 3-section burner assembly designed for International Comfort Products (ICP) heating units. This genuine replacement ensures precise gas-to-air ratios for clean combustion and optimal heat exchange across residential and light commercial furnaces. Engineered to meet exact factory specifications, the ICP 1149463 serves as a direct drop-in for Arcoaire burner replacement, Comfortmaker burner assembly, and Tempstar furnace parts. Replacing corroded or fouled burners with this made in the USA assembly restores flame stability and prevents delayed ignition or uneven heating. For technicians servicing ICP-built equipment, using the Heil 1149463 burner kit is necessary to maintain the internal pressure balance and airflow dynamics original to the heat exchanger?s design. Ensure you verify the specific orifice sizing and manifold pressure after installation to match local gas requirements.
Technical Benefits:
- Precision Gas Distribution: This 3-section burner kit provides uniform flame distribution to prevent localized hot spots on the heat exchanger.
- OEM Compatibility: Designed specifically for ICP brands including Heil, Arcoaire, Comfortmaker, and Tempstar.
- Durable Construction: High-grade materials resist thermal stress and corrosion common in high-moisture combustion environments.
- Reliable Ignition: Engineered for seamless interface with standard pilot or hot surface ignition systems used in ICP furnaces.
Common Technical Questions:
When should an ICP burner assembly be replaced?
Inspect for heavy scaling, port clogging, or cracks in the metal that cannot be cleared with a wire brush or compressed air. If flames are "lifting" or showing orange streaks despite correct manifold pressure, the 1149463 burner assembly may be compromised.
Is this kit compatible with Propane (LP) or Natural Gas?
This Heil furnace burner kit is a mechanical assembly. Compatibility depends on the orifices installed. Always reuse your existing orifices or utilize a certified LP conversion kit when switching fuel types.
Does this include the igniter or flame sensor?
This kit focuses on the 3-section burner assembly housing. If your diagnostic shows a failure in the ignition sequence, the igniter or flame sensor should be inspected separately.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Heil Quaker ICP 1149463 Burner Kit
The Heil Quaker ICP 1149463 Burner Kit is a critical OEM 3-section burner assembly designed for International Comfort Products (ICP) heating units. This genuine replacement ensures precise gas-to-air ratios for clean combustion and optimal heat exchange across residential and light commercial furnaces. Engineered to meet exact factory specifications, the ICP 1149463 serves as a direct drop-in for Arcoaire burner replacement, Comfortmaker burner assembly, and Tempstar furnace parts. Replacing corroded or fouled burners with this made in the USA assembly restores flame stability and prevents delayed ignition or uneven heating. For technicians servicing ICP-built equipment, using the Heil 1149463 burner kit is necessary to maintain the internal pressure balance and airflow dynamics original to the heat exchanger?s design. Ensure you verify the specific orifice sizing and manifold pressure after installation to match local gas requirements.
Technical Benefits:
- Precision Gas Distribution: This 3-section burner kit provides uniform flame distribution to prevent localized hot spots on the heat exchanger.
- OEM Compatibility: Designed specifically for ICP brands including Heil, Arcoaire, Comfortmaker, and Tempstar.
- Durable Construction: High-grade materials resist thermal stress and corrosion common in high-moisture combustion environments.
- Reliable Ignition: Engineered for seamless interface with standard pilot or hot surface ignition systems used in ICP furnaces.
Common Technical Questions:
When should an ICP burner assembly be replaced?
Inspect for heavy scaling, port clogging, or cracks in the metal that cannot be cleared with a wire brush or compressed air. If flames are "lifting" or showing orange streaks despite correct manifold pressure, the 1149463 burner assembly may be compromised.
Is this kit compatible with Propane (LP) or Natural Gas?
This Heil furnace burner kit is a mechanical assembly. Compatibility depends on the orifices installed. Always reuse your existing orifices or utilize a certified LP conversion kit when switching fuel types.
Does this include the igniter or flame sensor?
This kit focuses on the 3-section burner assembly housing. If your diagnostic shows a failure in the ignition sequence, the igniter or flame sensor should be inspected separately.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Heil Quaker ICP 1149463 Burner Kit is a critical OEM 3-section burner assembly designed for International Comfort Products (ICP) heating units. This genuine replacement ensures precise gas-to-air ratios for clean combustion and optimal heat exchange across residential and light commercial furnaces. Engineered to meet exact factory specifications, the ICP 1149463 serves as a direct drop-in for Arcoaire burner replacement, Comfortmaker burner assembly, and Tempstar furnace parts. Replacing corroded or fouled burners with this made in the USA assembly restores flame stability and prevents delayed ignition or uneven heating. For technicians servicing ICP-built equipment, using the Heil 1149463 burner kit is necessary to maintain the internal pressure balance and airflow dynamics original to the heat exchanger?s design. Ensure you verify the specific orifice sizing and manifold pressure after installation to match local gas requirements.
Technical Benefits:
- Precision Gas Distribution: This 3-section burner kit provides uniform flame distribution to prevent localized hot spots on the heat exchanger.
- OEM Compatibility: Designed specifically for ICP brands including Heil, Arcoaire, Comfortmaker, and Tempstar.
- Durable Construction: High-grade materials resist thermal stress and corrosion common in high-moisture combustion environments.
- Reliable Ignition: Engineered for seamless interface with standard pilot or hot surface ignition systems used in ICP furnaces.
Common Technical Questions:
When should an ICP burner assembly be replaced?
Inspect for heavy scaling, port clogging, or cracks in the metal that cannot be cleared with a wire brush or compressed air. If flames are "lifting" or showing orange streaks despite correct manifold pressure, the 1149463 burner assembly may be compromised.
Is this kit compatible with Propane (LP) or Natural Gas?
This Heil furnace burner kit is a mechanical assembly. Compatibility depends on the orifices installed. Always reuse your existing orifices or utilize a certified LP conversion kit when switching fuel types.
Does this include the igniter or flame sensor?
This kit focuses on the 3-section burner assembly housing. If your diagnostic shows a failure in the ignition sequence, the igniter or flame sensor should be inspected separately.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
