Heil Quaker ICP 11201007000047 Sensor
When you are troubleshooting communication errors or efficiency drops in Carrier or Heil Quaker systems, the ICP 11201007000047 Sensor is a critical diagnostic replacement. This 53-inch PIPE TEMPERATURE SENSOR features a 1-inch precision tip designed for direct contact with refrigeration or hydronic lines. As a genuine OEM HVAC replacement part, it provides the exact thermistor resistance curve required by the control board to monitor liquid line or suction line temperatures accurately. Modern ICP heat pumps and central air conditioners rely on this data to manage defrost cycles and prevent evaporator coil freeze-ups. Using a high-accuracy thermistor like the 11201007000047 ensures the system avoids short-cycling and maintains operational efficiency. This sensor is compatible with a wide range of International Comfort Products equipment, including Arcoaire, Comfortmaker, and Tempstar units. Proper installation at the specified pipe temperature monitoring point is essential for restoring factory-standard performance and resolving sensor-related fault codes.
Key Benefits- Precision Diagnostics: Engineered to provide real-time thermal feedback, preventing "out-of-range" logic errors on the main control board.
- OEM Compatibility: Designed specifically for ICP and Carrier equipment, replacing obsolete part numbers 11201007000006 and 202301300111.
- Extended Lead Length: The 53-inch wiring harness allows for flexible routing and secure connection in tight condenser or air handler cabinets.
- Optimized Efficiency: Accurate sensing enables the system to modulate refrigerant flow and defrost timing, reducing unnecessary mechanical stress.
How do I know if the pipe temperature sensor is failing?
Technicians typically look for fault codes indicating an open or shorted sensor circuit. You can also test the sensor with a multimeter; if the resistance (ohms) does not change consistently with temperature fluctuations, the 11201007000047 should be replaced.
Can I use this sensor on any brand of heat pump?
This is an ICP OEM part calibrated for specific resistance-to-temperature scales used by Carrier, Heil, and related brands. While it may physically fit other pipes, using it on non-compatible control boards will lead to inaccurate temperature readings and system errors.
Does this sensor come with the mounting clip?
This part includes the 53-inch leads and the thermistor tip. It is recommended to reuse existing copper clips or secure the sensor with high-temperature foil tape and insulation to ensure thermal transfer from the pipe is not affected by ambient air.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $7.08
-65%$7.08
$2.48Heil Quaker ICP 11201007000047 Sensor
When you are troubleshooting communication errors or efficiency drops in Carrier or Heil Quaker systems, the ICP 11201007000047 Sensor is a critical diagnostic replacement. This 53-inch PIPE TEMPERATURE SENSOR features a 1-inch precision tip designed for direct contact with refrigeration or hydronic lines. As a genuine OEM HVAC replacement part, it provides the exact thermistor resistance curve required by the control board to monitor liquid line or suction line temperatures accurately. Modern ICP heat pumps and central air conditioners rely on this data to manage defrost cycles and prevent evaporator coil freeze-ups. Using a high-accuracy thermistor like the 11201007000047 ensures the system avoids short-cycling and maintains operational efficiency. This sensor is compatible with a wide range of International Comfort Products equipment, including Arcoaire, Comfortmaker, and Tempstar units. Proper installation at the specified pipe temperature monitoring point is essential for restoring factory-standard performance and resolving sensor-related fault codes.
Key Benefits- Precision Diagnostics: Engineered to provide real-time thermal feedback, preventing "out-of-range" logic errors on the main control board.
- OEM Compatibility: Designed specifically for ICP and Carrier equipment, replacing obsolete part numbers 11201007000006 and 202301300111.
- Extended Lead Length: The 53-inch wiring harness allows for flexible routing and secure connection in tight condenser or air handler cabinets.
- Optimized Efficiency: Accurate sensing enables the system to modulate refrigerant flow and defrost timing, reducing unnecessary mechanical stress.
How do I know if the pipe temperature sensor is failing?
Technicians typically look for fault codes indicating an open or shorted sensor circuit. You can also test the sensor with a multimeter; if the resistance (ohms) does not change consistently with temperature fluctuations, the 11201007000047 should be replaced.
Can I use this sensor on any brand of heat pump?
This is an ICP OEM part calibrated for specific resistance-to-temperature scales used by Carrier, Heil, and related brands. While it may physically fit other pipes, using it on non-compatible control boards will lead to inaccurate temperature readings and system errors.
Does this sensor come with the mounting clip?
This part includes the 53-inch leads and the thermistor tip. It is recommended to reuse existing copper clips or secure the sensor with high-temperature foil tape and insulation to ensure thermal transfer from the pipe is not affected by ambient air.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you are troubleshooting communication errors or efficiency drops in Carrier or Heil Quaker systems, the ICP 11201007000047 Sensor is a critical diagnostic replacement. This 53-inch PIPE TEMPERATURE SENSOR features a 1-inch precision tip designed for direct contact with refrigeration or hydronic lines. As a genuine OEM HVAC replacement part, it provides the exact thermistor resistance curve required by the control board to monitor liquid line or suction line temperatures accurately. Modern ICP heat pumps and central air conditioners rely on this data to manage defrost cycles and prevent evaporator coil freeze-ups. Using a high-accuracy thermistor like the 11201007000047 ensures the system avoids short-cycling and maintains operational efficiency. This sensor is compatible with a wide range of International Comfort Products equipment, including Arcoaire, Comfortmaker, and Tempstar units. Proper installation at the specified pipe temperature monitoring point is essential for restoring factory-standard performance and resolving sensor-related fault codes.
Key Benefits- Precision Diagnostics: Engineered to provide real-time thermal feedback, preventing "out-of-range" logic errors on the main control board.
- OEM Compatibility: Designed specifically for ICP and Carrier equipment, replacing obsolete part numbers 11201007000006 and 202301300111.
- Extended Lead Length: The 53-inch wiring harness allows for flexible routing and secure connection in tight condenser or air handler cabinets.
- Optimized Efficiency: Accurate sensing enables the system to modulate refrigerant flow and defrost timing, reducing unnecessary mechanical stress.
How do I know if the pipe temperature sensor is failing?
Technicians typically look for fault codes indicating an open or shorted sensor circuit. You can also test the sensor with a multimeter; if the resistance (ohms) does not change consistently with temperature fluctuations, the 11201007000047 should be replaced.
Can I use this sensor on any brand of heat pump?
This is an ICP OEM part calibrated for specific resistance-to-temperature scales used by Carrier, Heil, and related brands. While it may physically fit other pipes, using it on non-compatible control boards will lead to inaccurate temperature readings and system errors.
Does this sensor come with the mounting clip?
This part includes the 53-inch leads and the thermistor tip. It is recommended to reuse existing copper clips or secure the sensor with high-temperature foil tape and insulation to ensure thermal transfer from the pipe is not affected by ambient air.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
