Cleveland Controls NS2-1013-00 Pressure Switch
The Cleveland Controls NS2-1013-00 Pressure Switch is a mission-critical safety component engineered for precise HVAC air pressure sensing in residential and light commercial systems. This OEM pressure switch comes factory-calibrated to a .40" W.C. (water column) setpoint, acting as a high-reliability proof-of-airflow sensor to ensure the inducer motor is moving sufficient combustion air before the ignition sequence initiates. Constructed with a glass-filled polycarbonate housing and a high-grade sensing diaphragm, the NS2-1013-00 is built to withstand the rigorous vibration and thermal cycling common in modern furnace pressure switch applications, operating reliably within a temperature range of -40°F to 190°F.
For field technicians, this unit simplifies HVAC furnace repair by including a universal mounting bracket and color-coded ports (Black for High/P1, Gray for Low/P2). Its SPDT (Single Pole Double Throw) contact configuration provides versatile terminal options for proving circuit state to the control board. Whether you are performing a pressure switch replacement or troubleshooting a "failed to close" error code, the Cleveland Controls NS2-1013-00 provides the exact OEM specifications required to restore system safety and airflow monitoring performance.
Key Benefits for Contractors
- Precise .40" W.C. Calibration: Ensures strict adherence to manufacturer safety thresholds for inducer draft verification.
- Industrial-Grade Durability: Glass-filled polycarbonate housing resists cracking and deformation in high-heat environments.
- Universal Mounting: Includes a versatile mounting bracket to accelerate installation and ensure a secure fit.
- Broad Compatibility: Supports positive, negative, and differential pressure sensing for a wide array of air handlers and furnaces.
- OEM Reliability: Direct replacement for Cleveland Controls NS2-1013-00, eliminating the risk of mismatched trip points.
Common Questions
Is the setpoint on this switch adjustable?
While the NS2 series can be field-adjustable, this specific NS2-1013-00 model is factory-set to .40" W.C. to meet specific OEM safety requirements. Altering the factory setting is not recommended for safety-critical furnace applications.
What are the P1 and P2 port designations?
The Black port (P1) is the high-pressure/positive inlet, and the Gray port (P2) is the low-pressure/negative inlet. For standard furnace inducer sensing, the hose typically connects to the P2 port.
Can this replace a switch with a different W.C. rating?
No. Pressure switches must be matched exactly to the equipment's original specifications. Using a switch with a lower or higher rating than .40" W.C. can lead to unsafe combustion conditions or frequent system lockouts.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $25.87
-65%$25.87
$9.05Cleveland Controls NS2-1013-00 Pressure Switch
The Cleveland Controls NS2-1013-00 Pressure Switch is a mission-critical safety component engineered for precise HVAC air pressure sensing in residential and light commercial systems. This OEM pressure switch comes factory-calibrated to a .40" W.C. (water column) setpoint, acting as a high-reliability proof-of-airflow sensor to ensure the inducer motor is moving sufficient combustion air before the ignition sequence initiates. Constructed with a glass-filled polycarbonate housing and a high-grade sensing diaphragm, the NS2-1013-00 is built to withstand the rigorous vibration and thermal cycling common in modern furnace pressure switch applications, operating reliably within a temperature range of -40°F to 190°F.
For field technicians, this unit simplifies HVAC furnace repair by including a universal mounting bracket and color-coded ports (Black for High/P1, Gray for Low/P2). Its SPDT (Single Pole Double Throw) contact configuration provides versatile terminal options for proving circuit state to the control board. Whether you are performing a pressure switch replacement or troubleshooting a "failed to close" error code, the Cleveland Controls NS2-1013-00 provides the exact OEM specifications required to restore system safety and airflow monitoring performance.
Key Benefits for Contractors
- Precise .40" W.C. Calibration: Ensures strict adherence to manufacturer safety thresholds for inducer draft verification.
- Industrial-Grade Durability: Glass-filled polycarbonate housing resists cracking and deformation in high-heat environments.
- Universal Mounting: Includes a versatile mounting bracket to accelerate installation and ensure a secure fit.
- Broad Compatibility: Supports positive, negative, and differential pressure sensing for a wide array of air handlers and furnaces.
- OEM Reliability: Direct replacement for Cleveland Controls NS2-1013-00, eliminating the risk of mismatched trip points.
Common Questions
Is the setpoint on this switch adjustable?
While the NS2 series can be field-adjustable, this specific NS2-1013-00 model is factory-set to .40" W.C. to meet specific OEM safety requirements. Altering the factory setting is not recommended for safety-critical furnace applications.
What are the P1 and P2 port designations?
The Black port (P1) is the high-pressure/positive inlet, and the Gray port (P2) is the low-pressure/negative inlet. For standard furnace inducer sensing, the hose typically connects to the P2 port.
Can this replace a switch with a different W.C. rating?
No. Pressure switches must be matched exactly to the equipment's original specifications. Using a switch with a lower or higher rating than .40" W.C. can lead to unsafe combustion conditions or frequent system lockouts.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Cleveland Controls NS2-1013-00 Pressure Switch is a mission-critical safety component engineered for precise HVAC air pressure sensing in residential and light commercial systems. This OEM pressure switch comes factory-calibrated to a .40" W.C. (water column) setpoint, acting as a high-reliability proof-of-airflow sensor to ensure the inducer motor is moving sufficient combustion air before the ignition sequence initiates. Constructed with a glass-filled polycarbonate housing and a high-grade sensing diaphragm, the NS2-1013-00 is built to withstand the rigorous vibration and thermal cycling common in modern furnace pressure switch applications, operating reliably within a temperature range of -40°F to 190°F.
For field technicians, this unit simplifies HVAC furnace repair by including a universal mounting bracket and color-coded ports (Black for High/P1, Gray for Low/P2). Its SPDT (Single Pole Double Throw) contact configuration provides versatile terminal options for proving circuit state to the control board. Whether you are performing a pressure switch replacement or troubleshooting a "failed to close" error code, the Cleveland Controls NS2-1013-00 provides the exact OEM specifications required to restore system safety and airflow monitoring performance.
Key Benefits for Contractors
- Precise .40" W.C. Calibration: Ensures strict adherence to manufacturer safety thresholds for inducer draft verification.
- Industrial-Grade Durability: Glass-filled polycarbonate housing resists cracking and deformation in high-heat environments.
- Universal Mounting: Includes a versatile mounting bracket to accelerate installation and ensure a secure fit.
- Broad Compatibility: Supports positive, negative, and differential pressure sensing for a wide array of air handlers and furnaces.
- OEM Reliability: Direct replacement for Cleveland Controls NS2-1013-00, eliminating the risk of mismatched trip points.
Common Questions
Is the setpoint on this switch adjustable?
While the NS2 series can be field-adjustable, this specific NS2-1013-00 model is factory-set to .40" W.C. to meet specific OEM safety requirements. Altering the factory setting is not recommended for safety-critical furnace applications.
What are the P1 and P2 port designations?
The Black port (P1) is the high-pressure/positive inlet, and the Gray port (P2) is the low-pressure/negative inlet. For standard furnace inducer sensing, the hose typically connects to the P2 port.
Can this replace a switch with a different W.C. rating?
No. Pressure switches must be matched exactly to the equipment's original specifications. Using a switch with a lower or higher rating than .40" W.C. can lead to unsafe combustion conditions or frequent system lockouts.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
