York S1-VLSC-024RVS Valve Coil
Maintaining proper cycle control in a split system or heat pump requires a responsive solenoid, and the York S1-VLSC-024RVS Valve Coil is the professional-grade solution for restoring directional refrigerant flow. This 24V replacement coil is engineered specifically to actuate the reversing valve slide, allowing for seamless transitions between heating and cooling modes. Operating at a standard 24V AC with a power draw of approximately 5W to 6W, this OEM reversing valve coil ensures the magnetic field strength is sufficient to overcome internal pressure differentials without overheating the solenoid housing. As the direct factory replacement for the legacy S1-025-30215-002, it fits current production and older York heat pump units, eliminating the need for field modifications. For technicians troubleshooting a unit stuck in one mode, verifying the solenoid coil resistance and replacing a failed S1-VLSC-024RVS is a standard protocol to ensure HVAC system performance and seasonal reliability.
Key Benefits
- Direct OEM Compatibility: Engineered as the exact S1-025-30215-002 replacement to ensure precise fitment on York and Johnson Controls valves.
- Standardized Voltage: Operates on a standard 24V control circuit, making it compatible with most residential and light commercial HVAC controls.
- Reliable Actuation: Provides consistent magnetic force to shift the reversing valve, preventing system lock-up in a single thermal mode.
- Simplified Installation: Features a slide-on design that allows for quick field replacement during emergency service calls.
Common Questions
How do I confirm if my York reversing valve coil is bad?
Technicians should first check for 24V at the coil leads during a call for heat or cool (depending on the default position). If voltage is present but the valve doesn't shift, check the York S1-VLSC-024RVS for continuity or signs of swelling. A "zero" or "infinite" resistance reading typically indicates a short or an open winding.
Does this coil include the reversing valve body?
No, the S1-VLSC-024RVS is the solenoid coil only. It is designed to be replaced independently of the refrigerant-side valve body, which avoids the need to recover refrigerant or braze lines if only the electrical component has failed.
Will this work on non-York equipment?
While designed for York, Luxaire, and Coleman equipment, many manufacturers use similar reversing valve solenoids. However, to ensure proper seating and magnetic flux alignment, it is recommended to use this part strictly as a replacement for the S1-025-30215-002 or S1-VLSC-024RVS.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
York S1-VLSC-024RVS Valve Coil
Maintaining proper cycle control in a split system or heat pump requires a responsive solenoid, and the York S1-VLSC-024RVS Valve Coil is the professional-grade solution for restoring directional refrigerant flow. This 24V replacement coil is engineered specifically to actuate the reversing valve slide, allowing for seamless transitions between heating and cooling modes. Operating at a standard 24V AC with a power draw of approximately 5W to 6W, this OEM reversing valve coil ensures the magnetic field strength is sufficient to overcome internal pressure differentials without overheating the solenoid housing. As the direct factory replacement for the legacy S1-025-30215-002, it fits current production and older York heat pump units, eliminating the need for field modifications. For technicians troubleshooting a unit stuck in one mode, verifying the solenoid coil resistance and replacing a failed S1-VLSC-024RVS is a standard protocol to ensure HVAC system performance and seasonal reliability.
Key Benefits
- Direct OEM Compatibility: Engineered as the exact S1-025-30215-002 replacement to ensure precise fitment on York and Johnson Controls valves.
- Standardized Voltage: Operates on a standard 24V control circuit, making it compatible with most residential and light commercial HVAC controls.
- Reliable Actuation: Provides consistent magnetic force to shift the reversing valve, preventing system lock-up in a single thermal mode.
- Simplified Installation: Features a slide-on design that allows for quick field replacement during emergency service calls.
Common Questions
How do I confirm if my York reversing valve coil is bad?
Technicians should first check for 24V at the coil leads during a call for heat or cool (depending on the default position). If voltage is present but the valve doesn't shift, check the York S1-VLSC-024RVS for continuity or signs of swelling. A "zero" or "infinite" resistance reading typically indicates a short or an open winding.
Does this coil include the reversing valve body?
No, the S1-VLSC-024RVS is the solenoid coil only. It is designed to be replaced independently of the refrigerant-side valve body, which avoids the need to recover refrigerant or braze lines if only the electrical component has failed.
Will this work on non-York equipment?
While designed for York, Luxaire, and Coleman equipment, many manufacturers use similar reversing valve solenoids. However, to ensure proper seating and magnetic flux alignment, it is recommended to use this part strictly as a replacement for the S1-025-30215-002 or S1-VLSC-024RVS.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Maintaining proper cycle control in a split system or heat pump requires a responsive solenoid, and the York S1-VLSC-024RVS Valve Coil is the professional-grade solution for restoring directional refrigerant flow. This 24V replacement coil is engineered specifically to actuate the reversing valve slide, allowing for seamless transitions between heating and cooling modes. Operating at a standard 24V AC with a power draw of approximately 5W to 6W, this OEM reversing valve coil ensures the magnetic field strength is sufficient to overcome internal pressure differentials without overheating the solenoid housing. As the direct factory replacement for the legacy S1-025-30215-002, it fits current production and older York heat pump units, eliminating the need for field modifications. For technicians troubleshooting a unit stuck in one mode, verifying the solenoid coil resistance and replacing a failed S1-VLSC-024RVS is a standard protocol to ensure HVAC system performance and seasonal reliability.
Key Benefits
- Direct OEM Compatibility: Engineered as the exact S1-025-30215-002 replacement to ensure precise fitment on York and Johnson Controls valves.
- Standardized Voltage: Operates on a standard 24V control circuit, making it compatible with most residential and light commercial HVAC controls.
- Reliable Actuation: Provides consistent magnetic force to shift the reversing valve, preventing system lock-up in a single thermal mode.
- Simplified Installation: Features a slide-on design that allows for quick field replacement during emergency service calls.
Common Questions
How do I confirm if my York reversing valve coil is bad?
Technicians should first check for 24V at the coil leads during a call for heat or cool (depending on the default position). If voltage is present but the valve doesn't shift, check the York S1-VLSC-024RVS for continuity or signs of swelling. A "zero" or "infinite" resistance reading typically indicates a short or an open winding.
Does this coil include the reversing valve body?
No, the S1-VLSC-024RVS is the solenoid coil only. It is designed to be replaced independently of the refrigerant-side valve body, which avoids the need to recover refrigerant or braze lines if only the electrical component has failed.
Will this work on non-York equipment?
While designed for York, Luxaire, and Coleman equipment, many manufacturers use similar reversing valve solenoids. However, to ensure proper seating and magnetic flux alignment, it is recommended to use this part strictly as a replacement for the S1-025-30215-002 or S1-VLSC-024RVS.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
