York S1-328-16423-000 Kit
The York S1-328-16423-000 Condensate Pan Kit 130M is a critical OEM replacement part engineered specifically for high-efficiency 95+ AFUE 33-inch gas furnaces. Designed for 130,000 BTU systems, this secondary heat exchanger drain pan features a precise 1.13-inch restrictor hole size to maintain correct pressure differentials and drainage flow. In the field, technicians often encounter cracked or warped pans that lead to secondary heat exchanger blockages; this kit provides the robust structural integrity required to handle the corrosive environment of furnace condensate. This HVAC replacement pan is essential for preventing water damage to the vestibule panel and surrounding electrical components. When installing, professional practice requires adhering to a 20 +/- 3 in-lbs torque specification to the combustion blower assembly to prevent housing stress. For older systems, verify if the condensate pressure switch requires an upgrade from -0.40” w.c. to -0.20” w.c. as per updated technical bulletins to ensure proper fault detection and safety compliance.
Key Benefits:
- Precision Fit: Specifically factory-engineered for York 130,000 BTU furnaces with a 1.13" restrictor plate.
- Leak Prevention: High-grade composite material resists the acidic properties of furnace condensate to eliminate housing failure.
- System Reliability: Restores proper drainage and prevents blocked condensate switch trips and system lockouts.
- Full Kit Deployment: Includes necessary seals and mounting interfaces to maintain BTU capacity performance standards.
Common Questions:
Is this pan compatible with modifying BTU ratings in the field?
No, this pan is calibrated specifically for 130M units. Using it on lower BTU models will fluctuate the pressure switch readings and likely cause ignition failures.
What is the correct torque for mounting the combustion blower to this pan?
The manufacturer specifies a torque of 20 +/- 3 in-lbs. Over-tightening with an impact driver will crack the plastic mounting nubs, requiring a full pan replacement.
Does this kit include a new pressure switch?
While the kit provides the pan and seals, some 95% AFUE models require a separate purchase of an S1-02435812000 switch if the original was rated at -0.40" w.c.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $204.41
-65%$204.41
$71.54York S1-328-16423-000 Kit
The York S1-328-16423-000 Condensate Pan Kit 130M is a critical OEM replacement part engineered specifically for high-efficiency 95+ AFUE 33-inch gas furnaces. Designed for 130,000 BTU systems, this secondary heat exchanger drain pan features a precise 1.13-inch restrictor hole size to maintain correct pressure differentials and drainage flow. In the field, technicians often encounter cracked or warped pans that lead to secondary heat exchanger blockages; this kit provides the robust structural integrity required to handle the corrosive environment of furnace condensate. This HVAC replacement pan is essential for preventing water damage to the vestibule panel and surrounding electrical components. When installing, professional practice requires adhering to a 20 +/- 3 in-lbs torque specification to the combustion blower assembly to prevent housing stress. For older systems, verify if the condensate pressure switch requires an upgrade from -0.40” w.c. to -0.20” w.c. as per updated technical bulletins to ensure proper fault detection and safety compliance.
Key Benefits:
- Precision Fit: Specifically factory-engineered for York 130,000 BTU furnaces with a 1.13" restrictor plate.
- Leak Prevention: High-grade composite material resists the acidic properties of furnace condensate to eliminate housing failure.
- System Reliability: Restores proper drainage and prevents blocked condensate switch trips and system lockouts.
- Full Kit Deployment: Includes necessary seals and mounting interfaces to maintain BTU capacity performance standards.
Common Questions:
Is this pan compatible with modifying BTU ratings in the field?
No, this pan is calibrated specifically for 130M units. Using it on lower BTU models will fluctuate the pressure switch readings and likely cause ignition failures.
What is the correct torque for mounting the combustion blower to this pan?
The manufacturer specifies a torque of 20 +/- 3 in-lbs. Over-tightening with an impact driver will crack the plastic mounting nubs, requiring a full pan replacement.
Does this kit include a new pressure switch?
While the kit provides the pan and seals, some 95% AFUE models require a separate purchase of an S1-02435812000 switch if the original was rated at -0.40" w.c.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-328-16423-000 Condensate Pan Kit 130M is a critical OEM replacement part engineered specifically for high-efficiency 95+ AFUE 33-inch gas furnaces. Designed for 130,000 BTU systems, this secondary heat exchanger drain pan features a precise 1.13-inch restrictor hole size to maintain correct pressure differentials and drainage flow. In the field, technicians often encounter cracked or warped pans that lead to secondary heat exchanger blockages; this kit provides the robust structural integrity required to handle the corrosive environment of furnace condensate. This HVAC replacement pan is essential for preventing water damage to the vestibule panel and surrounding electrical components. When installing, professional practice requires adhering to a 20 +/- 3 in-lbs torque specification to the combustion blower assembly to prevent housing stress. For older systems, verify if the condensate pressure switch requires an upgrade from -0.40” w.c. to -0.20” w.c. as per updated technical bulletins to ensure proper fault detection and safety compliance.
Key Benefits:
- Precision Fit: Specifically factory-engineered for York 130,000 BTU furnaces with a 1.13" restrictor plate.
- Leak Prevention: High-grade composite material resists the acidic properties of furnace condensate to eliminate housing failure.
- System Reliability: Restores proper drainage and prevents blocked condensate switch trips and system lockouts.
- Full Kit Deployment: Includes necessary seals and mounting interfaces to maintain BTU capacity performance standards.
Common Questions:
Is this pan compatible with modifying BTU ratings in the field?
No, this pan is calibrated specifically for 130M units. Using it on lower BTU models will fluctuate the pressure switch readings and likely cause ignition failures.
What is the correct torque for mounting the combustion blower to this pan?
The manufacturer specifies a torque of 20 +/- 3 in-lbs. Over-tightening with an impact driver will crack the plastic mounting nubs, requiring a full pan replacement.
Does this kit include a new pressure switch?
While the kit provides the pan and seals, some 95% AFUE models require a separate purchase of an S1-02435812000 switch if the original was rated at -0.40" w.c.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
