York S1-324-36081-273 Module
The York S1-324-36081-273 Module is a factory-programmed, 1HP high-efficiency motor controller designed for exact compatibility with EON ECM blower motors. This Eon series programmed control module manages torque and airflow profiles specifically for residential air handlers and furnaces, ensuring the system maintains precise CFM targets across various static pressures. As a technician, you know that ECM motor troubleshooting often points to the drive rather than the windings; replacing this OEM York blower motor module restores variable-speed functionality and peak energy efficiency without requiring field programming. Built to handle the rigorous duty cycles of modern high-efficiency HVAC equipment, this replacement ECM controller provides the reliable communication needed for 115V or 230V applications. When your diagnostic confirms a failed thermistor or communication error at the 16-pin connector, swapping with a genuine S1-324-36081-273 motor module is the only way to safeguard the airflow logic and system performance expected by the end-user.
Key Benefits- Factory-Programmed Logic: Pre-loaded with specific 1HP performance parameters to ensure correct CFM and torque for York, Luxaire, and Coleman equipment.
- Plug-and-Play Integration: Seamlessly connects to existing 4-pin/5-pin or 16-pin harnesses, reducing diagnostic and installation time in the field.
- Variable-Speed Precision: Actively adjusts motor speed to overcome duct restrictions, maintaining consistent indoor air quality and comfort.
- Engineered Durability: Designed for high-amperage environments to prevent common failure points like capacitor bursts or burnt seats.
Can I use this module on a different brand of ECM motor?
No. ECM control modules are programmed with proprietary manufacturer algorithms. You must use a direct match to prevent improper blower operation or damage to the motor.
How do I verify if the module is the failure point?
After confirming high voltage at the 5-pin plug and 24VAC demand at the communication harness, perform a "Go-No-Go" test. If the motor doesn't spin but turns freely by hand and has balanced winding resistance, the module is likely the culprit.
Does this module require a jumper for voltage selection?
On many EON/GE models, 120V systems require a jumper between pins 1 and 2 of the power connector, while 240V systems must have it removed. Always refer to the original wiring harness configuration during replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $1,120.22
-65%$1,120.22
$392.08York S1-324-36081-273 Module
The York S1-324-36081-273 Module is a factory-programmed, 1HP high-efficiency motor controller designed for exact compatibility with EON ECM blower motors. This Eon series programmed control module manages torque and airflow profiles specifically for residential air handlers and furnaces, ensuring the system maintains precise CFM targets across various static pressures. As a technician, you know that ECM motor troubleshooting often points to the drive rather than the windings; replacing this OEM York blower motor module restores variable-speed functionality and peak energy efficiency without requiring field programming. Built to handle the rigorous duty cycles of modern high-efficiency HVAC equipment, this replacement ECM controller provides the reliable communication needed for 115V or 230V applications. When your diagnostic confirms a failed thermistor or communication error at the 16-pin connector, swapping with a genuine S1-324-36081-273 motor module is the only way to safeguard the airflow logic and system performance expected by the end-user.
Key Benefits- Factory-Programmed Logic: Pre-loaded with specific 1HP performance parameters to ensure correct CFM and torque for York, Luxaire, and Coleman equipment.
- Plug-and-Play Integration: Seamlessly connects to existing 4-pin/5-pin or 16-pin harnesses, reducing diagnostic and installation time in the field.
- Variable-Speed Precision: Actively adjusts motor speed to overcome duct restrictions, maintaining consistent indoor air quality and comfort.
- Engineered Durability: Designed for high-amperage environments to prevent common failure points like capacitor bursts or burnt seats.
Can I use this module on a different brand of ECM motor?
No. ECM control modules are programmed with proprietary manufacturer algorithms. You must use a direct match to prevent improper blower operation or damage to the motor.
How do I verify if the module is the failure point?
After confirming high voltage at the 5-pin plug and 24VAC demand at the communication harness, perform a "Go-No-Go" test. If the motor doesn't spin but turns freely by hand and has balanced winding resistance, the module is likely the culprit.
Does this module require a jumper for voltage selection?
On many EON/GE models, 120V systems require a jumper between pins 1 and 2 of the power connector, while 240V systems must have it removed. Always refer to the original wiring harness configuration during replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-324-36081-273 Module is a factory-programmed, 1HP high-efficiency motor controller designed for exact compatibility with EON ECM blower motors. This Eon series programmed control module manages torque and airflow profiles specifically for residential air handlers and furnaces, ensuring the system maintains precise CFM targets across various static pressures. As a technician, you know that ECM motor troubleshooting often points to the drive rather than the windings; replacing this OEM York blower motor module restores variable-speed functionality and peak energy efficiency without requiring field programming. Built to handle the rigorous duty cycles of modern high-efficiency HVAC equipment, this replacement ECM controller provides the reliable communication needed for 115V or 230V applications. When your diagnostic confirms a failed thermistor or communication error at the 16-pin connector, swapping with a genuine S1-324-36081-273 motor module is the only way to safeguard the airflow logic and system performance expected by the end-user.
Key Benefits- Factory-Programmed Logic: Pre-loaded with specific 1HP performance parameters to ensure correct CFM and torque for York, Luxaire, and Coleman equipment.
- Plug-and-Play Integration: Seamlessly connects to existing 4-pin/5-pin or 16-pin harnesses, reducing diagnostic and installation time in the field.
- Variable-Speed Precision: Actively adjusts motor speed to overcome duct restrictions, maintaining consistent indoor air quality and comfort.
- Engineered Durability: Designed for high-amperage environments to prevent common failure points like capacitor bursts or burnt seats.
Can I use this module on a different brand of ECM motor?
No. ECM control modules are programmed with proprietary manufacturer algorithms. You must use a direct match to prevent improper blower operation or damage to the motor.
How do I verify if the module is the failure point?
After confirming high voltage at the 5-pin plug and 24VAC demand at the communication harness, perform a "Go-No-Go" test. If the motor doesn't spin but turns freely by hand and has balanced winding resistance, the module is likely the culprit.
Does this module require a jumper for voltage selection?
On many EON/GE models, 120V systems require a jumper between pins 1 and 2 of the power connector, while 240V systems must have it removed. Always refer to the original wiring harness configuration during replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
