York S1-324-36079-549 Control
For technicians servicing high-efficiency York air handlers and furnaces, the York S1-324-36079-549 Control Module is the critical programmed intelligence required for 1/2hp EON ECM motor systems. This genuine OEM York replacement part is factory-programmed to manage specific torque and airflow parameters, ensuring the blower maintains the precise constant airflow (CFM) required for multi-stage heating and cooling. Unlike generic controllers, the S1-324-36079-549 ECM programmer integrates directly with the system's 16-pin harness to interpret 24V signals for heat, cool, and dehumidification modes. Modern HVAC motor control boards like this are essential for resolving issues where the motor "hunts" for speed or fails to ramp up during a call for second-stage operation. This module is designed for 120/240V single-phase applications and provides the necessary communication for variable speed blower motor efficiency. Replace your failing York EON motor module to restore system static pressure balance and prevent excessive wear on the motor windings.
Key Benefits- Pre-Programmed Logic: Specifically flashed for 1/2hp EON ECM applications to eliminate the need for field programming.
- Precise CFM Control: Maintains consistent airflow across varying static pressures to optimize IAQ and system efficiency.
- Plug-and-Play Integration: Designed for standard 16-pin and 5-pin York wiring harnesses for rapid field replacement.
- OEM Reliability: Ensures exact compatibility with York air handlers, avoiding the diagnostic errors common with "universal" parts.
Does this module require a separate programming tool?
No, the S1-324-36079-549 is a factory-programmed motor control module. It is ready for installation into the specific York blower assemblies it is rated for without additional software.
How do I know if the module or the motor itself has failed?
Start by checking for 120/240V at the 5-pin power connector and 24V signals at the 16-pin harness. If the motor windings ohm out correctly but the blower refuses to turn or exhibits erratic speed "searching," the control module is the likely culprit.
Can I use this on a 1hp motor?
No, this specific part number is programmed and rated exclusively for 1/2hp EON ECM motors. Using it on a higher horsepower motor will result in improper airflow and potential component failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $1,251.97
-65%$1,251.97
$438.19York S1-324-36079-549 Control
For technicians servicing high-efficiency York air handlers and furnaces, the York S1-324-36079-549 Control Module is the critical programmed intelligence required for 1/2hp EON ECM motor systems. This genuine OEM York replacement part is factory-programmed to manage specific torque and airflow parameters, ensuring the blower maintains the precise constant airflow (CFM) required for multi-stage heating and cooling. Unlike generic controllers, the S1-324-36079-549 ECM programmer integrates directly with the system's 16-pin harness to interpret 24V signals for heat, cool, and dehumidification modes. Modern HVAC motor control boards like this are essential for resolving issues where the motor "hunts" for speed or fails to ramp up during a call for second-stage operation. This module is designed for 120/240V single-phase applications and provides the necessary communication for variable speed blower motor efficiency. Replace your failing York EON motor module to restore system static pressure balance and prevent excessive wear on the motor windings.
Key Benefits- Pre-Programmed Logic: Specifically flashed for 1/2hp EON ECM applications to eliminate the need for field programming.
- Precise CFM Control: Maintains consistent airflow across varying static pressures to optimize IAQ and system efficiency.
- Plug-and-Play Integration: Designed for standard 16-pin and 5-pin York wiring harnesses for rapid field replacement.
- OEM Reliability: Ensures exact compatibility with York air handlers, avoiding the diagnostic errors common with "universal" parts.
Does this module require a separate programming tool?
No, the S1-324-36079-549 is a factory-programmed motor control module. It is ready for installation into the specific York blower assemblies it is rated for without additional software.
How do I know if the module or the motor itself has failed?
Start by checking for 120/240V at the 5-pin power connector and 24V signals at the 16-pin harness. If the motor windings ohm out correctly but the blower refuses to turn or exhibits erratic speed "searching," the control module is the likely culprit.
Can I use this on a 1hp motor?
No, this specific part number is programmed and rated exclusively for 1/2hp EON ECM motors. Using it on a higher horsepower motor will result in improper airflow and potential component failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For technicians servicing high-efficiency York air handlers and furnaces, the York S1-324-36079-549 Control Module is the critical programmed intelligence required for 1/2hp EON ECM motor systems. This genuine OEM York replacement part is factory-programmed to manage specific torque and airflow parameters, ensuring the blower maintains the precise constant airflow (CFM) required for multi-stage heating and cooling. Unlike generic controllers, the S1-324-36079-549 ECM programmer integrates directly with the system's 16-pin harness to interpret 24V signals for heat, cool, and dehumidification modes. Modern HVAC motor control boards like this are essential for resolving issues where the motor "hunts" for speed or fails to ramp up during a call for second-stage operation. This module is designed for 120/240V single-phase applications and provides the necessary communication for variable speed blower motor efficiency. Replace your failing York EON motor module to restore system static pressure balance and prevent excessive wear on the motor windings.
Key Benefits- Pre-Programmed Logic: Specifically flashed for 1/2hp EON ECM applications to eliminate the need for field programming.
- Precise CFM Control: Maintains consistent airflow across varying static pressures to optimize IAQ and system efficiency.
- Plug-and-Play Integration: Designed for standard 16-pin and 5-pin York wiring harnesses for rapid field replacement.
- OEM Reliability: Ensures exact compatibility with York air handlers, avoiding the diagnostic errors common with "universal" parts.
Does this module require a separate programming tool?
No, the S1-324-36079-549 is a factory-programmed motor control module. It is ready for installation into the specific York blower assemblies it is rated for without additional software.
How do I know if the module or the motor itself has failed?
Start by checking for 120/240V at the 5-pin power connector and 24V signals at the 16-pin harness. If the motor windings ohm out correctly but the blower refuses to turn or exhibits erratic speed "searching," the control module is the likely culprit.
Can I use this on a 1hp motor?
No, this specific part number is programmed and rated exclusively for 1/2hp EON ECM motors. Using it on a higher horsepower motor will result in improper airflow and potential component failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
