York S1-1PS3301 Conversion Kit
The York S1-1PS3301 Conversion Kit is a specialized OEM component designed for 33-inch single-stage furnaces operating at elevations exceeding 5,000 feet. At high altitudes, reduced air density impacts combustion stability; this kit replaces the factory-standard pressure switch with Source 1 part S1-02435778000, featuring a specific 0.60 IWG set point to ensure the draft inducer provides sufficient static pressure for safe operation. This high altitude furnace kit is compatible with a wide range of Residential Single Stage (80% and 95% AFUE) platforms, including TG8S, TM8E, and TG9S series. Proper installation preserves combustion efficiency and prevents nuisance pressure switch trips or carbon monoxide risks associated with improper fuel-to-air ratios in thin atmosphere conditions. For contractors, utilizing genuine York replacement parts ensures seamless mechanical fit and logical electrical termination, maintaining the integrity of the furnace gas system without the need for field modifications to the original switch.
Key Benefits- Precise Pressure Calibration: Includes a factory-set 0.60 IWG switch specifically tuned for thin air performance above 5,000 feet.
- System Safety: Prevents incomplete combustion and potential soot buildup by accurately sensing inducer motor draft.
- OEM Compatibility: Engineered for York single-stage gas furnaces, ensuring technical alignment with 33-inch cabinet specifications.
- Complete Solution: Provides the necessary pressure switch and conversion labels required for local code compliance.
When is this high altitude kit required?
Technicians should install this kit whenever a compatible York single-stage furnace is located at an altitude higher than 5,000 feet above sea level. Standard units are typically rated for operation up to 5,000 feet, but higher elevations require this switch to compensate for lower atmospheric pressure.
Can I just adjust the existing pressure switch?
No. Adjusting a factory-calibrated pressure switch is unsafe and can lead to equipment malfunction or hazardous operating conditions. This kit provides a purpose-built York pressure switch designed for specific high-altitude parameters.
Does this kit include gas orifices?
This specific kit focuses on the pressure switch conversion. Depending on the specific installation altitude and the BTU rating of the furnace, additional gas orifice derating may be required as per the National Fuel Gas Code.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $51.27
-65%$51.27
$17.94York S1-1PS3301 Conversion Kit
The York S1-1PS3301 Conversion Kit is a specialized OEM component designed for 33-inch single-stage furnaces operating at elevations exceeding 5,000 feet. At high altitudes, reduced air density impacts combustion stability; this kit replaces the factory-standard pressure switch with Source 1 part S1-02435778000, featuring a specific 0.60 IWG set point to ensure the draft inducer provides sufficient static pressure for safe operation. This high altitude furnace kit is compatible with a wide range of Residential Single Stage (80% and 95% AFUE) platforms, including TG8S, TM8E, and TG9S series. Proper installation preserves combustion efficiency and prevents nuisance pressure switch trips or carbon monoxide risks associated with improper fuel-to-air ratios in thin atmosphere conditions. For contractors, utilizing genuine York replacement parts ensures seamless mechanical fit and logical electrical termination, maintaining the integrity of the furnace gas system without the need for field modifications to the original switch.
Key Benefits- Precise Pressure Calibration: Includes a factory-set 0.60 IWG switch specifically tuned for thin air performance above 5,000 feet.
- System Safety: Prevents incomplete combustion and potential soot buildup by accurately sensing inducer motor draft.
- OEM Compatibility: Engineered for York single-stage gas furnaces, ensuring technical alignment with 33-inch cabinet specifications.
- Complete Solution: Provides the necessary pressure switch and conversion labels required for local code compliance.
When is this high altitude kit required?
Technicians should install this kit whenever a compatible York single-stage furnace is located at an altitude higher than 5,000 feet above sea level. Standard units are typically rated for operation up to 5,000 feet, but higher elevations require this switch to compensate for lower atmospheric pressure.
Can I just adjust the existing pressure switch?
No. Adjusting a factory-calibrated pressure switch is unsafe and can lead to equipment malfunction or hazardous operating conditions. This kit provides a purpose-built York pressure switch designed for specific high-altitude parameters.
Does this kit include gas orifices?
This specific kit focuses on the pressure switch conversion. Depending on the specific installation altitude and the BTU rating of the furnace, additional gas orifice derating may be required as per the National Fuel Gas Code.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-1PS3301 Conversion Kit is a specialized OEM component designed for 33-inch single-stage furnaces operating at elevations exceeding 5,000 feet. At high altitudes, reduced air density impacts combustion stability; this kit replaces the factory-standard pressure switch with Source 1 part S1-02435778000, featuring a specific 0.60 IWG set point to ensure the draft inducer provides sufficient static pressure for safe operation. This high altitude furnace kit is compatible with a wide range of Residential Single Stage (80% and 95% AFUE) platforms, including TG8S, TM8E, and TG9S series. Proper installation preserves combustion efficiency and prevents nuisance pressure switch trips or carbon monoxide risks associated with improper fuel-to-air ratios in thin atmosphere conditions. For contractors, utilizing genuine York replacement parts ensures seamless mechanical fit and logical electrical termination, maintaining the integrity of the furnace gas system without the need for field modifications to the original switch.
Key Benefits- Precise Pressure Calibration: Includes a factory-set 0.60 IWG switch specifically tuned for thin air performance above 5,000 feet.
- System Safety: Prevents incomplete combustion and potential soot buildup by accurately sensing inducer motor draft.
- OEM Compatibility: Engineered for York single-stage gas furnaces, ensuring technical alignment with 33-inch cabinet specifications.
- Complete Solution: Provides the necessary pressure switch and conversion labels required for local code compliance.
When is this high altitude kit required?
Technicians should install this kit whenever a compatible York single-stage furnace is located at an altitude higher than 5,000 feet above sea level. Standard units are typically rated for operation up to 5,000 feet, but higher elevations require this switch to compensate for lower atmospheric pressure.
Can I just adjust the existing pressure switch?
No. Adjusting a factory-calibrated pressure switch is unsafe and can lead to equipment malfunction or hazardous operating conditions. This kit provides a purpose-built York pressure switch designed for specific high-altitude parameters.
Does this kit include gas orifices?
This specific kit focuses on the pressure switch conversion. Depending on the specific installation altitude and the BTU rating of the furnace, additional gas orifice derating may be required as per the National Fuel Gas Code.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
