York S1-063-90038-014 Plate
When you're dealing with a draft inducer assembly that isn't pulling the right vacuum, the York S1-063-90038-014 Ventor Plate is the critical component needed to restore proper static pressure. This genuine HVAC OEM replacement part features a precision-machined 2.187-inch orifice designed specifically to regulate flue gas velocity and optimize combustion air ratios. As a veteran tech knows, the ventor plate is the interface between the inducer motor and the heat exchanger; if the orifice is pitted or the plate is warped, your pressure switch won't close, leading to intermittent ignition failures or total system lockout. Built to handle the high-temp environment of the furnace inducer assembly, this 4-bolt plate ensures a tight seal to maintain the negative pressure required for safe venting. Whether you're troubleshooting a York furnace that’s short-cycling or performing a full inducer swap, installing this exact-match ventor plate 2.187 orifice is the only way to ensure the unit meets factory-spec CFM and draft requirements.
Key Benefits- Precision Airflow Control: The 2.187" orifice is calibrated to provide the exact draft needed for specific York furnace BTU ratings.
- Rugged Construction: Engineered to resist corrosion from acidic flue gas condensates, extending the life of the venting system.
- OEM Fitment: Standard 4-bolt mounting pattern eliminates the need for field modifications during furnace repair.
- Enhanced Safety: Ensures the draft pressure switch receives an accurate signal, preventing dangerous exhaust backups.
How do I know if the ventor plate needs replacement?
If you notice heavy rusting or "vortex marks" around the orifice opening, or if your inducer motor is running but the pressure switch fails to prove, the plate may be compromised or mismatched for the unit's firing rate.
Will this work on generic inducer motors?
This plate is specifically designed for York, Coleman, and Luxaire gas furnaces. Always verify the orifice size (2.187") against the original specs of the furnace to ensure proper combustion.
Does the plate come with a gasket?
Standard replacement plates typically require a high-temp gasket or silicone to ensure a gas-tight seal against the collector box. Always inspect your housing for any cracks before mounting.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
York S1-063-90038-014 Plate
When you're dealing with a draft inducer assembly that isn't pulling the right vacuum, the York S1-063-90038-014 Ventor Plate is the critical component needed to restore proper static pressure. This genuine HVAC OEM replacement part features a precision-machined 2.187-inch orifice designed specifically to regulate flue gas velocity and optimize combustion air ratios. As a veteran tech knows, the ventor plate is the interface between the inducer motor and the heat exchanger; if the orifice is pitted or the plate is warped, your pressure switch won't close, leading to intermittent ignition failures or total system lockout. Built to handle the high-temp environment of the furnace inducer assembly, this 4-bolt plate ensures a tight seal to maintain the negative pressure required for safe venting. Whether you're troubleshooting a York furnace that’s short-cycling or performing a full inducer swap, installing this exact-match ventor plate 2.187 orifice is the only way to ensure the unit meets factory-spec CFM and draft requirements.
Key Benefits- Precision Airflow Control: The 2.187" orifice is calibrated to provide the exact draft needed for specific York furnace BTU ratings.
- Rugged Construction: Engineered to resist corrosion from acidic flue gas condensates, extending the life of the venting system.
- OEM Fitment: Standard 4-bolt mounting pattern eliminates the need for field modifications during furnace repair.
- Enhanced Safety: Ensures the draft pressure switch receives an accurate signal, preventing dangerous exhaust backups.
How do I know if the ventor plate needs replacement?
If you notice heavy rusting or "vortex marks" around the orifice opening, or if your inducer motor is running but the pressure switch fails to prove, the plate may be compromised or mismatched for the unit's firing rate.
Will this work on generic inducer motors?
This plate is specifically designed for York, Coleman, and Luxaire gas furnaces. Always verify the orifice size (2.187") against the original specs of the furnace to ensure proper combustion.
Does the plate come with a gasket?
Standard replacement plates typically require a high-temp gasket or silicone to ensure a gas-tight seal against the collector box. Always inspect your housing for any cracks before mounting.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're dealing with a draft inducer assembly that isn't pulling the right vacuum, the York S1-063-90038-014 Ventor Plate is the critical component needed to restore proper static pressure. This genuine HVAC OEM replacement part features a precision-machined 2.187-inch orifice designed specifically to regulate flue gas velocity and optimize combustion air ratios. As a veteran tech knows, the ventor plate is the interface between the inducer motor and the heat exchanger; if the orifice is pitted or the plate is warped, your pressure switch won't close, leading to intermittent ignition failures or total system lockout. Built to handle the high-temp environment of the furnace inducer assembly, this 4-bolt plate ensures a tight seal to maintain the negative pressure required for safe venting. Whether you're troubleshooting a York furnace that’s short-cycling or performing a full inducer swap, installing this exact-match ventor plate 2.187 orifice is the only way to ensure the unit meets factory-spec CFM and draft requirements.
Key Benefits- Precision Airflow Control: The 2.187" orifice is calibrated to provide the exact draft needed for specific York furnace BTU ratings.
- Rugged Construction: Engineered to resist corrosion from acidic flue gas condensates, extending the life of the venting system.
- OEM Fitment: Standard 4-bolt mounting pattern eliminates the need for field modifications during furnace repair.
- Enhanced Safety: Ensures the draft pressure switch receives an accurate signal, preventing dangerous exhaust backups.
How do I know if the ventor plate needs replacement?
If you notice heavy rusting or "vortex marks" around the orifice opening, or if your inducer motor is running but the pressure switch fails to prove, the plate may be compromised or mismatched for the unit's firing rate.
Will this work on generic inducer motors?
This plate is specifically designed for York, Coleman, and Luxaire gas furnaces. Always verify the orifice size (2.187") against the original specs of the furnace to ensure proper combustion.
Does the plate come with a gasket?
Standard replacement plates typically require a high-temp gasket or silicone to ensure a gas-tight seal against the collector box. Always inspect your housing for any cracks before mounting.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
