York S1-031-03010-000 Control Board
The York S1-031-03010-000 Control Board is a genuine OEM single stage furnace control board engineered for precise sequencing and monitoring of York, Coleman, and Luxaire gas-fired furnaces. This HVAC replacement circuit board functions as the primary logic controller, managing critical sequences including the hot surface igniter (HSI), inducer fan motor operation, and multi-speed blower timings. As the designated York furnace part for modernizing single-stage systems, it provides a direct electrical and mounting footprint for several legacy modules. This board is essential for troubleshooting common furnace issues such as furnace ignition failure, unresponsive blower motors, or safety limit circuit lockouts.
Technicians often encounter failed units in the field that utilize older part numbers. The S1-031-03010-000 is the factory-authorized York control board replacement for discontinued part numbers including S1-331-03010-000, 031-01266-000, 031-01972-000, and 331-02956-000. By installing an OEM HVAC control board, you ensure the internal safety timings for gas valve modulation and flame rectification remain within the original engineering parameters of the furnace cabinet.
Key Benefits for Technicians:- Direct Drop-in Compatibility: Eliminates the need for wiring harness modifications by utilizing standard molex and spade connections found on York single stage heating systems.
- Enhanced System Reliability: Features robust integrated circuitry designed to handle voltage fluctuations and high-cycle ignition sequences common in residential heating.
- Simplified Diagnostics: Includes onboard LED indicators to provide rapid fault code identification, reducing diagnostic time during service calls.
- Optimized Airflow Management: Regulates blower off-delay timings to maximize heat exchanger cooling and improve overall system efficiency.
What are the symptoms of a failing York S1-031-03010-000 control board?
Common indicators include the blower motor running continuously, a lack of power to the hot surface igniter, or the system failing to respond to a "W" call from the thermostat. Diagnostic LEDs on the board will typically flash specific patterns to indicate if the failure is board-level or related to external sensors.
Can this board be used in two-stage furnace applications?
No, this is a single stage control board. It is designed specifically for standard furnaces with one level of heating capacity and will not correctly manage a two-stage gas valve or induction motor.
Does this board replace the S1-331-03010-000?
Yes, the S1-031-03010-000 is the current factory replacement part number that supersedes the S1-331-03010-000, ensuring your installation meets current OEM technical standards.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $173.38
-65%$173.38
$60.68York S1-031-03010-000 Control Board
The York S1-031-03010-000 Control Board is a genuine OEM single stage furnace control board engineered for precise sequencing and monitoring of York, Coleman, and Luxaire gas-fired furnaces. This HVAC replacement circuit board functions as the primary logic controller, managing critical sequences including the hot surface igniter (HSI), inducer fan motor operation, and multi-speed blower timings. As the designated York furnace part for modernizing single-stage systems, it provides a direct electrical and mounting footprint for several legacy modules. This board is essential for troubleshooting common furnace issues such as furnace ignition failure, unresponsive blower motors, or safety limit circuit lockouts.
Technicians often encounter failed units in the field that utilize older part numbers. The S1-031-03010-000 is the factory-authorized York control board replacement for discontinued part numbers including S1-331-03010-000, 031-01266-000, 031-01972-000, and 331-02956-000. By installing an OEM HVAC control board, you ensure the internal safety timings for gas valve modulation and flame rectification remain within the original engineering parameters of the furnace cabinet.
Key Benefits for Technicians:- Direct Drop-in Compatibility: Eliminates the need for wiring harness modifications by utilizing standard molex and spade connections found on York single stage heating systems.
- Enhanced System Reliability: Features robust integrated circuitry designed to handle voltage fluctuations and high-cycle ignition sequences common in residential heating.
- Simplified Diagnostics: Includes onboard LED indicators to provide rapid fault code identification, reducing diagnostic time during service calls.
- Optimized Airflow Management: Regulates blower off-delay timings to maximize heat exchanger cooling and improve overall system efficiency.
What are the symptoms of a failing York S1-031-03010-000 control board?
Common indicators include the blower motor running continuously, a lack of power to the hot surface igniter, or the system failing to respond to a "W" call from the thermostat. Diagnostic LEDs on the board will typically flash specific patterns to indicate if the failure is board-level or related to external sensors.
Can this board be used in two-stage furnace applications?
No, this is a single stage control board. It is designed specifically for standard furnaces with one level of heating capacity and will not correctly manage a two-stage gas valve or induction motor.
Does this board replace the S1-331-03010-000?
Yes, the S1-031-03010-000 is the current factory replacement part number that supersedes the S1-331-03010-000, ensuring your installation meets current OEM technical standards.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-031-03010-000 Control Board is a genuine OEM single stage furnace control board engineered for precise sequencing and monitoring of York, Coleman, and Luxaire gas-fired furnaces. This HVAC replacement circuit board functions as the primary logic controller, managing critical sequences including the hot surface igniter (HSI), inducer fan motor operation, and multi-speed blower timings. As the designated York furnace part for modernizing single-stage systems, it provides a direct electrical and mounting footprint for several legacy modules. This board is essential for troubleshooting common furnace issues such as furnace ignition failure, unresponsive blower motors, or safety limit circuit lockouts.
Technicians often encounter failed units in the field that utilize older part numbers. The S1-031-03010-000 is the factory-authorized York control board replacement for discontinued part numbers including S1-331-03010-000, 031-01266-000, 031-01972-000, and 331-02956-000. By installing an OEM HVAC control board, you ensure the internal safety timings for gas valve modulation and flame rectification remain within the original engineering parameters of the furnace cabinet.
Key Benefits for Technicians:- Direct Drop-in Compatibility: Eliminates the need for wiring harness modifications by utilizing standard molex and spade connections found on York single stage heating systems.
- Enhanced System Reliability: Features robust integrated circuitry designed to handle voltage fluctuations and high-cycle ignition sequences common in residential heating.
- Simplified Diagnostics: Includes onboard LED indicators to provide rapid fault code identification, reducing diagnostic time during service calls.
- Optimized Airflow Management: Regulates blower off-delay timings to maximize heat exchanger cooling and improve overall system efficiency.
What are the symptoms of a failing York S1-031-03010-000 control board?
Common indicators include the blower motor running continuously, a lack of power to the hot surface igniter, or the system failing to respond to a "W" call from the thermostat. Diagnostic LEDs on the board will typically flash specific patterns to indicate if the failure is board-level or related to external sensors.
Can this board be used in two-stage furnace applications?
No, this is a single stage control board. It is designed specifically for standard furnaces with one level of heating capacity and will not correctly manage a two-stage gas valve or induction motor.
Does this board replace the S1-331-03010-000?
Yes, the S1-031-03010-000 is the current factory replacement part number that supersedes the S1-331-03010-000, ensuring your installation meets current OEM technical standards.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
