York S1-028-15539-000 Hose
The York S1-028-15539-000 Hose is a critical OEM component engineered for secondary heat exchanger drainage in high-efficiency gas furnaces. As a high-grade furnace rain gutter hose, this part is specifically designed to manage the flow of acidic condensate, preventing moisture from backing up into the inducer housing or pressure switch lines. Field technicians regularly utilize this HVAC condensate hose on York, Coleman, and Luxaire gas furnaces, including various LX Series and TG9S models, where precise fitment is mandatory to maintain cabinet static pressure. The 17.45-inch length and flexible EPDM rubber construction allow for secure routing around internal components without the risk of kinking or thermal degradation.
Replacing an aging or cracked S1-028-15539-000 is a standard part of York furnace maintenance to prevent nuisance pressure switch trips and heat exchanger corrosion. While universal tubing may fail under the thermal stresses of the furnace cabinet, these York replacement parts provide the thickness and molded shape necessary to withstand constant heating and cooling cycles. For contractors, ensuring a leak-proof seal at the collector box is vital for protecting the control board and blower motor from water damage, making this OEM hose an essential part of any professional service kit.
Key Benefits- S1-028-15539-000 Compatibility: Engineered for a perfect fit on specific York, Coleman, and Luxaire high-efficiency 90% AFUE furnace units.
- Industrial Grade EPDM: Resistant to the corrosive properties of furnace condensate and the high temperatures within the primary burner cabinet.
- Prevention of System Faults: Properly channels moisture to the trap to avoid water-induced pressure switch lockouts and inducer failure.
- Direct OEM Replacement: Replaces factory-installed gutter hoses with the exact 17.45-inch length and diameter required for secure clamping.
What furnace models are compatible with this rain gutter hose?
The York S1-028-15539-000 fits a wide range of high-efficiency gas furnaces, including the 1NP, ACP, EABD, and TG9S series. Verification of the model and serial number is recommended to ensure the internal diameter matches your specific collector box port.
Can I use standard vinyl tubing as a substitute?
Field experience shows that standard vinyl often kinks or collapses when subjected to the negative pressure and high heat of an inducer assembly. This OEM hose is molded to maintain its structural integrity and airflow path under all operating conditions.
What are the signs that this hose needs replacement?
Technicians should look for brittle rubber, cracking at the connection points, or water stains inside the cabinet bottom. If the furnace is tripping a pressure switch fault, check this hose for blockages or loose seals.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $20.07
-65%$20.07
$7.02York S1-028-15539-000 Hose
The York S1-028-15539-000 Hose is a critical OEM component engineered for secondary heat exchanger drainage in high-efficiency gas furnaces. As a high-grade furnace rain gutter hose, this part is specifically designed to manage the flow of acidic condensate, preventing moisture from backing up into the inducer housing or pressure switch lines. Field technicians regularly utilize this HVAC condensate hose on York, Coleman, and Luxaire gas furnaces, including various LX Series and TG9S models, where precise fitment is mandatory to maintain cabinet static pressure. The 17.45-inch length and flexible EPDM rubber construction allow for secure routing around internal components without the risk of kinking or thermal degradation.
Replacing an aging or cracked S1-028-15539-000 is a standard part of York furnace maintenance to prevent nuisance pressure switch trips and heat exchanger corrosion. While universal tubing may fail under the thermal stresses of the furnace cabinet, these York replacement parts provide the thickness and molded shape necessary to withstand constant heating and cooling cycles. For contractors, ensuring a leak-proof seal at the collector box is vital for protecting the control board and blower motor from water damage, making this OEM hose an essential part of any professional service kit.
Key Benefits- S1-028-15539-000 Compatibility: Engineered for a perfect fit on specific York, Coleman, and Luxaire high-efficiency 90% AFUE furnace units.
- Industrial Grade EPDM: Resistant to the corrosive properties of furnace condensate and the high temperatures within the primary burner cabinet.
- Prevention of System Faults: Properly channels moisture to the trap to avoid water-induced pressure switch lockouts and inducer failure.
- Direct OEM Replacement: Replaces factory-installed gutter hoses with the exact 17.45-inch length and diameter required for secure clamping.
What furnace models are compatible with this rain gutter hose?
The York S1-028-15539-000 fits a wide range of high-efficiency gas furnaces, including the 1NP, ACP, EABD, and TG9S series. Verification of the model and serial number is recommended to ensure the internal diameter matches your specific collector box port.
Can I use standard vinyl tubing as a substitute?
Field experience shows that standard vinyl often kinks or collapses when subjected to the negative pressure and high heat of an inducer assembly. This OEM hose is molded to maintain its structural integrity and airflow path under all operating conditions.
What are the signs that this hose needs replacement?
Technicians should look for brittle rubber, cracking at the connection points, or water stains inside the cabinet bottom. If the furnace is tripping a pressure switch fault, check this hose for blockages or loose seals.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-028-15539-000 Hose is a critical OEM component engineered for secondary heat exchanger drainage in high-efficiency gas furnaces. As a high-grade furnace rain gutter hose, this part is specifically designed to manage the flow of acidic condensate, preventing moisture from backing up into the inducer housing or pressure switch lines. Field technicians regularly utilize this HVAC condensate hose on York, Coleman, and Luxaire gas furnaces, including various LX Series and TG9S models, where precise fitment is mandatory to maintain cabinet static pressure. The 17.45-inch length and flexible EPDM rubber construction allow for secure routing around internal components without the risk of kinking or thermal degradation.
Replacing an aging or cracked S1-028-15539-000 is a standard part of York furnace maintenance to prevent nuisance pressure switch trips and heat exchanger corrosion. While universal tubing may fail under the thermal stresses of the furnace cabinet, these York replacement parts provide the thickness and molded shape necessary to withstand constant heating and cooling cycles. For contractors, ensuring a leak-proof seal at the collector box is vital for protecting the control board and blower motor from water damage, making this OEM hose an essential part of any professional service kit.
Key Benefits- S1-028-15539-000 Compatibility: Engineered for a perfect fit on specific York, Coleman, and Luxaire high-efficiency 90% AFUE furnace units.
- Industrial Grade EPDM: Resistant to the corrosive properties of furnace condensate and the high temperatures within the primary burner cabinet.
- Prevention of System Faults: Properly channels moisture to the trap to avoid water-induced pressure switch lockouts and inducer failure.
- Direct OEM Replacement: Replaces factory-installed gutter hoses with the exact 17.45-inch length and diameter required for secure clamping.
What furnace models are compatible with this rain gutter hose?
The York S1-028-15539-000 fits a wide range of high-efficiency gas furnaces, including the 1NP, ACP, EABD, and TG9S series. Verification of the model and serial number is recommended to ensure the internal diameter matches your specific collector box port.
Can I use standard vinyl tubing as a substitute?
Field experience shows that standard vinyl often kinks or collapses when subjected to the negative pressure and high heat of an inducer assembly. This OEM hose is molded to maintain its structural integrity and airflow path under all operating conditions.
What are the signs that this hose needs replacement?
Technicians should look for brittle rubber, cracking at the connection points, or water stains inside the cabinet bottom. If the furnace is tripping a pressure switch fault, check this hose for blockages or loose seals.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
