York S1-025-50564-000 Sensor
The York S1-025-50564-000 Sensor is a mission-critical HVAC temperature thermistor designed for high-accuracy thermal monitoring in residential and commercial systems. Engineered to operate within a wide range of -40 to 110C, this genuine OEM York part provides the precise resistance data necessary for smart equipment control boards to regulate heating and cooling cycles. Featuring a female connector for secure, vibration-resistant termination, it is frequently utilized as an ambient air sensor or coil temperature sensor in chillers, air handlers, and package units. By delivering real-time feedback, it prevents system lockouts, freeze-ups, and compressor overheating. For techs in the field, this is a standard 10k ohm thermistor replacement that ensures the control logic matches actual line or air conditions, maintaining peak SEER ratings and operational safety.
Key Benefits for Technicians:- Broad Operating Envelope: Rated for -40 to 110C, making it suitable for both extreme low-temp suction lines and high-temp discharge monitoring.
- Universal Compatibility: Fits a wide array of York, Luxaire, and Coleman equipment using the S1-025-50564-000 specification.
- Reliable Termination: The female plug-in connector eliminates the need for field splicing, reducing the risk of high-resistance joints.
- OEM Precision: Guaranteed resistance-to-temperature curve accuracy, which is essential for HVAC system diagnostics and avoiding "bad sensor" fault codes.
How do I test if this sensor is defective?
Set your multimeter to the k-Ohm scale. At room temperature (approx. 77°F/25°C), a healthy York 10k sensor should read approximately 10,000 ohms. If the circuit is open, shorted, or significantly out of range based on the York resistance chart, replacement is required.
What causes these sensors to fail prematurely?
Most failures are due to moisture intrusion at the connector or physical damage from over-tightened zip ties (pinching the thermistor bulb). Always use the factory-supplied clips and ensure the bulb has direct contact with the copper pipe before re-insulating.
Can this be used as an outdoor ambient sensor?
Yes, its thermal range and construction allow it to function as an outdoor air sensor on York Smart Equipment boards to manage defrost cycles and high-ambient cutouts.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
York S1-025-50564-000 Sensor
The York S1-025-50564-000 Sensor is a mission-critical HVAC temperature thermistor designed for high-accuracy thermal monitoring in residential and commercial systems. Engineered to operate within a wide range of -40 to 110C, this genuine OEM York part provides the precise resistance data necessary for smart equipment control boards to regulate heating and cooling cycles. Featuring a female connector for secure, vibration-resistant termination, it is frequently utilized as an ambient air sensor or coil temperature sensor in chillers, air handlers, and package units. By delivering real-time feedback, it prevents system lockouts, freeze-ups, and compressor overheating. For techs in the field, this is a standard 10k ohm thermistor replacement that ensures the control logic matches actual line or air conditions, maintaining peak SEER ratings and operational safety.
Key Benefits for Technicians:- Broad Operating Envelope: Rated for -40 to 110C, making it suitable for both extreme low-temp suction lines and high-temp discharge monitoring.
- Universal Compatibility: Fits a wide array of York, Luxaire, and Coleman equipment using the S1-025-50564-000 specification.
- Reliable Termination: The female plug-in connector eliminates the need for field splicing, reducing the risk of high-resistance joints.
- OEM Precision: Guaranteed resistance-to-temperature curve accuracy, which is essential for HVAC system diagnostics and avoiding "bad sensor" fault codes.
How do I test if this sensor is defective?
Set your multimeter to the k-Ohm scale. At room temperature (approx. 77°F/25°C), a healthy York 10k sensor should read approximately 10,000 ohms. If the circuit is open, shorted, or significantly out of range based on the York resistance chart, replacement is required.
What causes these sensors to fail prematurely?
Most failures are due to moisture intrusion at the connector or physical damage from over-tightened zip ties (pinching the thermistor bulb). Always use the factory-supplied clips and ensure the bulb has direct contact with the copper pipe before re-insulating.
Can this be used as an outdoor ambient sensor?
Yes, its thermal range and construction allow it to function as an outdoor air sensor on York Smart Equipment boards to manage defrost cycles and high-ambient cutouts.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-025-50564-000 Sensor is a mission-critical HVAC temperature thermistor designed for high-accuracy thermal monitoring in residential and commercial systems. Engineered to operate within a wide range of -40 to 110C, this genuine OEM York part provides the precise resistance data necessary for smart equipment control boards to regulate heating and cooling cycles. Featuring a female connector for secure, vibration-resistant termination, it is frequently utilized as an ambient air sensor or coil temperature sensor in chillers, air handlers, and package units. By delivering real-time feedback, it prevents system lockouts, freeze-ups, and compressor overheating. For techs in the field, this is a standard 10k ohm thermistor replacement that ensures the control logic matches actual line or air conditions, maintaining peak SEER ratings and operational safety.
Key Benefits for Technicians:- Broad Operating Envelope: Rated for -40 to 110C, making it suitable for both extreme low-temp suction lines and high-temp discharge monitoring.
- Universal Compatibility: Fits a wide array of York, Luxaire, and Coleman equipment using the S1-025-50564-000 specification.
- Reliable Termination: The female plug-in connector eliminates the need for field splicing, reducing the risk of high-resistance joints.
- OEM Precision: Guaranteed resistance-to-temperature curve accuracy, which is essential for HVAC system diagnostics and avoiding "bad sensor" fault codes.
How do I test if this sensor is defective?
Set your multimeter to the k-Ohm scale. At room temperature (approx. 77°F/25°C), a healthy York 10k sensor should read approximately 10,000 ohms. If the circuit is open, shorted, or significantly out of range based on the York resistance chart, replacement is required.
What causes these sensors to fail prematurely?
Most failures are due to moisture intrusion at the connector or physical damage from over-tightened zip ties (pinching the thermistor bulb). Always use the factory-supplied clips and ensure the bulb has direct contact with the copper pipe before re-insulating.
Can this be used as an outdoor ambient sensor?
Yes, its thermal range and construction allow it to function as an outdoor air sensor on York Smart Equipment boards to manage defrost cycles and high-ambient cutouts.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
