York S1-025-47852-000 Gas Valve
The York S1-025-47852-000 Gas Valve is a critical OEM component designed for high-performance residential and commercial York HVAC systems. Engineered for versatility, this dual fuel gas valve is compatible with natural gas and liquid propane (LP) configurations, making it a standard replacement for precise manifold pressure regulation. It operates on a standard 24V AC ignition system and features a 3/4" x 3/4" NPT connection to ensure a secure, leak-free installation in the field. With a maximum flow capacity of 100,000 BTU/hr, this valve maintains consistent combustion performance across varying load demands.
Field technicians will find the S1-025-47852-000 provides an inlet pressure range of 2.5" to 10" WC and an adjustable outlet pressure of 1.5" to 3.5" WC, allowing for exact calibration to manufacturer specifications. This genuine Source 1 replacement part ensures the safety and efficiency of the furnace's burner assembly by preventing delayed ignition and erratic flame signals. Whether you are performing a seasonal tune-up or a critical repair, using this HVAC gas control valve ensures the equipment maintains its original safety listings and operational integrity.
Key Benefits- OEM Compatibility: Authentic Source 1 part specifically engineered for York, Luxaire, and Coleman equipment to ensure exact fitment.
- Dual Fuel Versatility: Factory-ready for natural gas with the mechanical capability for LP conversion, providing flexibility for diverse job sites.
- Precise Pressure Control: High-tolerance internal regulation maintains steady burner manifold pressure for optimal heat exchanger transfer.
- Robust Build Quality: Built to withstand the high-cycle demands of modern high-efficiency furnaces and makeup air units.
Can the S1-025-47852-000 be used for LP conversion?
Yes, this valve is rated for both Nat and LP fuel types. However, a specific LP conversion kit (sold separately) is required to adjust the spring and orifice settings for propane's higher energy density.
What are the electrical requirements for this valve?
This is a standard 24V AC intermittent pilot/direct spark ignition gas valve. Always verify the voltage at the gas valve leads using a multimeter before condemning the existing component.
What is the thread size for the inlet and outlet?
This model features 3/4 inch NPT threaded connections. Ensure you use a high-quality pipe dope or yellow PTFE tape rated for gas lines during installation to prevent leaks.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $273.63
-65%$273.63
$95.77York S1-025-47852-000 Gas Valve
The York S1-025-47852-000 Gas Valve is a critical OEM component designed for high-performance residential and commercial York HVAC systems. Engineered for versatility, this dual fuel gas valve is compatible with natural gas and liquid propane (LP) configurations, making it a standard replacement for precise manifold pressure regulation. It operates on a standard 24V AC ignition system and features a 3/4" x 3/4" NPT connection to ensure a secure, leak-free installation in the field. With a maximum flow capacity of 100,000 BTU/hr, this valve maintains consistent combustion performance across varying load demands.
Field technicians will find the S1-025-47852-000 provides an inlet pressure range of 2.5" to 10" WC and an adjustable outlet pressure of 1.5" to 3.5" WC, allowing for exact calibration to manufacturer specifications. This genuine Source 1 replacement part ensures the safety and efficiency of the furnace's burner assembly by preventing delayed ignition and erratic flame signals. Whether you are performing a seasonal tune-up or a critical repair, using this HVAC gas control valve ensures the equipment maintains its original safety listings and operational integrity.
Key Benefits- OEM Compatibility: Authentic Source 1 part specifically engineered for York, Luxaire, and Coleman equipment to ensure exact fitment.
- Dual Fuel Versatility: Factory-ready for natural gas with the mechanical capability for LP conversion, providing flexibility for diverse job sites.
- Precise Pressure Control: High-tolerance internal regulation maintains steady burner manifold pressure for optimal heat exchanger transfer.
- Robust Build Quality: Built to withstand the high-cycle demands of modern high-efficiency furnaces and makeup air units.
Can the S1-025-47852-000 be used for LP conversion?
Yes, this valve is rated for both Nat and LP fuel types. However, a specific LP conversion kit (sold separately) is required to adjust the spring and orifice settings for propane's higher energy density.
What are the electrical requirements for this valve?
This is a standard 24V AC intermittent pilot/direct spark ignition gas valve. Always verify the voltage at the gas valve leads using a multimeter before condemning the existing component.
What is the thread size for the inlet and outlet?
This model features 3/4 inch NPT threaded connections. Ensure you use a high-quality pipe dope or yellow PTFE tape rated for gas lines during installation to prevent leaks.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-025-47852-000 Gas Valve is a critical OEM component designed for high-performance residential and commercial York HVAC systems. Engineered for versatility, this dual fuel gas valve is compatible with natural gas and liquid propane (LP) configurations, making it a standard replacement for precise manifold pressure regulation. It operates on a standard 24V AC ignition system and features a 3/4" x 3/4" NPT connection to ensure a secure, leak-free installation in the field. With a maximum flow capacity of 100,000 BTU/hr, this valve maintains consistent combustion performance across varying load demands.
Field technicians will find the S1-025-47852-000 provides an inlet pressure range of 2.5" to 10" WC and an adjustable outlet pressure of 1.5" to 3.5" WC, allowing for exact calibration to manufacturer specifications. This genuine Source 1 replacement part ensures the safety and efficiency of the furnace's burner assembly by preventing delayed ignition and erratic flame signals. Whether you are performing a seasonal tune-up or a critical repair, using this HVAC gas control valve ensures the equipment maintains its original safety listings and operational integrity.
Key Benefits- OEM Compatibility: Authentic Source 1 part specifically engineered for York, Luxaire, and Coleman equipment to ensure exact fitment.
- Dual Fuel Versatility: Factory-ready for natural gas with the mechanical capability for LP conversion, providing flexibility for diverse job sites.
- Precise Pressure Control: High-tolerance internal regulation maintains steady burner manifold pressure for optimal heat exchanger transfer.
- Robust Build Quality: Built to withstand the high-cycle demands of modern high-efficiency furnaces and makeup air units.
Can the S1-025-47852-000 be used for LP conversion?
Yes, this valve is rated for both Nat and LP fuel types. However, a specific LP conversion kit (sold separately) is required to adjust the spring and orifice settings for propane's higher energy density.
What are the electrical requirements for this valve?
This is a standard 24V AC intermittent pilot/direct spark ignition gas valve. Always verify the voltage at the gas valve leads using a multimeter before condemning the existing component.
What is the thread size for the inlet and outlet?
This model features 3/4 inch NPT threaded connections. Ensure you use a high-quality pipe dope or yellow PTFE tape rated for gas lines during installation to prevent leaks.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
