York S1-025-41367-000 Heater Band
The York crankcase heater, part number S1-025-41367-000, is a critical component for maintaining optimal compressor health during the off-cycle. This 240V 40W heater is engineered for 17-to-21-inch diameters, providing the necessary thermal energy to prevent liquid refrigerant from migrating into the compressor oil. As a veteran tech knows, migration leads to oil dilution and foaming upon startup, which causes catastrophic bearing wear. By utilizing this HVAC heater band, you maintain the oil at a temperature higher than the system's coolest point, ensuring proper lubrication viscosity and preventing slugging. This S1-025-41367-000 unit is a direct OEM replacement for York, Coleman, and Luxaire equipment, designed to handle the high-vibration environment of a compressor crankcase heater. Proper installation ensures the heating element makes full contact with the compressor housing for efficient heat transfer, protecting the system during low-ambient conditions and extending the operational life of the reciprocating or scroll compressor.
- Optimized Viscosity: Prevents refrigerant-on-oil dilution to ensure the compressor pump starts with high-quality lubrication.
- Precise Fitment: Designed specifically for 17-inch to 21-inch compressor shells for maximum heat conduction.
- OEM Electrical Compatibility: Validated 240V, 40W resistance specifications for seamless integration with existing control circuits.
- Preventative Protection: Eliminates "cold start" stress by keeping refrigerant in the vapor state within the crankcase.
Common Questions
- How do I install a York crankcase heater band properly? Ensure the compressor shell is clean of debris. Wrap the band around the lower third of the housing, tighten the clamp securely for maximum surface contact, and verify the 240V supply matches the 40W draw using an ammeter.
- What causes a 240V 40W heater to fail? Most failures result from loose fitment causing "hot spots" in the element or moisture intrusion into the lead wire insulation. Always check for continuity during seasonal maintenance.
- Can the S1-025-41367-000 prevent compressor slugging? Yes, by keeping the oil warm, it forces refrigerant to stay in the evaporator or condenser as a gas, preventing liquid from accumulating in the compressor while the system is idle.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $61.62
-65%$61.62
$21.57York S1-025-41367-000 Heater Band
The York crankcase heater, part number S1-025-41367-000, is a critical component for maintaining optimal compressor health during the off-cycle. This 240V 40W heater is engineered for 17-to-21-inch diameters, providing the necessary thermal energy to prevent liquid refrigerant from migrating into the compressor oil. As a veteran tech knows, migration leads to oil dilution and foaming upon startup, which causes catastrophic bearing wear. By utilizing this HVAC heater band, you maintain the oil at a temperature higher than the system's coolest point, ensuring proper lubrication viscosity and preventing slugging. This S1-025-41367-000 unit is a direct OEM replacement for York, Coleman, and Luxaire equipment, designed to handle the high-vibration environment of a compressor crankcase heater. Proper installation ensures the heating element makes full contact with the compressor housing for efficient heat transfer, protecting the system during low-ambient conditions and extending the operational life of the reciprocating or scroll compressor.
- Optimized Viscosity: Prevents refrigerant-on-oil dilution to ensure the compressor pump starts with high-quality lubrication.
- Precise Fitment: Designed specifically for 17-inch to 21-inch compressor shells for maximum heat conduction.
- OEM Electrical Compatibility: Validated 240V, 40W resistance specifications for seamless integration with existing control circuits.
- Preventative Protection: Eliminates "cold start" stress by keeping refrigerant in the vapor state within the crankcase.
Common Questions
- How do I install a York crankcase heater band properly? Ensure the compressor shell is clean of debris. Wrap the band around the lower third of the housing, tighten the clamp securely for maximum surface contact, and verify the 240V supply matches the 40W draw using an ammeter.
- What causes a 240V 40W heater to fail? Most failures result from loose fitment causing "hot spots" in the element or moisture intrusion into the lead wire insulation. Always check for continuity during seasonal maintenance.
- Can the S1-025-41367-000 prevent compressor slugging? Yes, by keeping the oil warm, it forces refrigerant to stay in the evaporator or condenser as a gas, preventing liquid from accumulating in the compressor while the system is idle.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York crankcase heater, part number S1-025-41367-000, is a critical component for maintaining optimal compressor health during the off-cycle. This 240V 40W heater is engineered for 17-to-21-inch diameters, providing the necessary thermal energy to prevent liquid refrigerant from migrating into the compressor oil. As a veteran tech knows, migration leads to oil dilution and foaming upon startup, which causes catastrophic bearing wear. By utilizing this HVAC heater band, you maintain the oil at a temperature higher than the system's coolest point, ensuring proper lubrication viscosity and preventing slugging. This S1-025-41367-000 unit is a direct OEM replacement for York, Coleman, and Luxaire equipment, designed to handle the high-vibration environment of a compressor crankcase heater. Proper installation ensures the heating element makes full contact with the compressor housing for efficient heat transfer, protecting the system during low-ambient conditions and extending the operational life of the reciprocating or scroll compressor.
- Optimized Viscosity: Prevents refrigerant-on-oil dilution to ensure the compressor pump starts with high-quality lubrication.
- Precise Fitment: Designed specifically for 17-inch to 21-inch compressor shells for maximum heat conduction.
- OEM Electrical Compatibility: Validated 240V, 40W resistance specifications for seamless integration with existing control circuits.
- Preventative Protection: Eliminates "cold start" stress by keeping refrigerant in the vapor state within the crankcase.
Common Questions
- How do I install a York crankcase heater band properly? Ensure the compressor shell is clean of debris. Wrap the band around the lower third of the housing, tighten the clamp securely for maximum surface contact, and verify the 240V supply matches the 40W draw using an ammeter.
- What causes a 240V 40W heater to fail? Most failures result from loose fitment causing "hot spots" in the element or moisture intrusion into the lead wire insulation. Always check for continuity during seasonal maintenance.
- Can the S1-025-41367-000 prevent compressor slugging? Yes, by keeping the oil warm, it forces refrigerant to stay in the evaporator or condenser as a gas, preventing liquid from accumulating in the compressor while the system is idle.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
