York S1-025-32895-000 Heater
The York S1-025-32895-000 Crankcase Heater is a critical OEM replacement part engineered to maintain optimal lubricant temperature within the compressor housing during off-cycles. Rated at 27W and 1000V, this insertion-style heater is specifically designed to prevent refrigerant migration and subsequent oil foaming, which are leading causes of terminal failure in high-voltage HVAC equipment. For field technicians, the S1-025-32895-000 heater ensures the compressor starts under ideal thermal conditions, effectively mitigating the risk of liquid slugging and mechanical seizure. This HVAC compressor heater provides superior heat transfer compared to external belly-band alternatives by seating directly into the well, ensuring the compressor oil remains at the correct viscosity for immediate lubrication. Integrating this component during preventative compressor maintenance on York and Johnson Controls units is a standard requirement for ensuring long-term system reliability in low-ambient environments where high-voltage power configurations are present.
Key Benefits- Maintains consistent oil temperatures to prevent refrigerant dilution in the sump.
- Direct-insertion design provides maximum thermal conductivity versus wrap-around heaters.
- OEM-spec 1000V insulation rating ensures safe operation in high-voltage industrial applications.
- Reduces mechanical stress on the compressor during cold-weather startups.
How do I test the S1-025-32895-000 for proper operation?
Technicians should check for continuity and verify resistance using a multimeter; the Ohms reading should stay consistent with a 27W power draw at the rated voltage.
Is this heater compatible with standard residential units?
This specific model is rated for 1000V applications; always verify the voltage requirements of your control circuit and compressor housing before installation.
When should the crankcase heater be energized?
The heater must remain energized whenever the compressor is in the off-cycle to prevent liquid refrigerant from settling in the oil.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $47.19
-65%$47.19
$16.52York S1-025-32895-000 Heater
The York S1-025-32895-000 Crankcase Heater is a critical OEM replacement part engineered to maintain optimal lubricant temperature within the compressor housing during off-cycles. Rated at 27W and 1000V, this insertion-style heater is specifically designed to prevent refrigerant migration and subsequent oil foaming, which are leading causes of terminal failure in high-voltage HVAC equipment. For field technicians, the S1-025-32895-000 heater ensures the compressor starts under ideal thermal conditions, effectively mitigating the risk of liquid slugging and mechanical seizure. This HVAC compressor heater provides superior heat transfer compared to external belly-band alternatives by seating directly into the well, ensuring the compressor oil remains at the correct viscosity for immediate lubrication. Integrating this component during preventative compressor maintenance on York and Johnson Controls units is a standard requirement for ensuring long-term system reliability in low-ambient environments where high-voltage power configurations are present.
Key Benefits- Maintains consistent oil temperatures to prevent refrigerant dilution in the sump.
- Direct-insertion design provides maximum thermal conductivity versus wrap-around heaters.
- OEM-spec 1000V insulation rating ensures safe operation in high-voltage industrial applications.
- Reduces mechanical stress on the compressor during cold-weather startups.
How do I test the S1-025-32895-000 for proper operation?
Technicians should check for continuity and verify resistance using a multimeter; the Ohms reading should stay consistent with a 27W power draw at the rated voltage.
Is this heater compatible with standard residential units?
This specific model is rated for 1000V applications; always verify the voltage requirements of your control circuit and compressor housing before installation.
When should the crankcase heater be energized?
The heater must remain energized whenever the compressor is in the off-cycle to prevent liquid refrigerant from settling in the oil.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-025-32895-000 Crankcase Heater is a critical OEM replacement part engineered to maintain optimal lubricant temperature within the compressor housing during off-cycles. Rated at 27W and 1000V, this insertion-style heater is specifically designed to prevent refrigerant migration and subsequent oil foaming, which are leading causes of terminal failure in high-voltage HVAC equipment. For field technicians, the S1-025-32895-000 heater ensures the compressor starts under ideal thermal conditions, effectively mitigating the risk of liquid slugging and mechanical seizure. This HVAC compressor heater provides superior heat transfer compared to external belly-band alternatives by seating directly into the well, ensuring the compressor oil remains at the correct viscosity for immediate lubrication. Integrating this component during preventative compressor maintenance on York and Johnson Controls units is a standard requirement for ensuring long-term system reliability in low-ambient environments where high-voltage power configurations are present.
Key Benefits- Maintains consistent oil temperatures to prevent refrigerant dilution in the sump.
- Direct-insertion design provides maximum thermal conductivity versus wrap-around heaters.
- OEM-spec 1000V insulation rating ensures safe operation in high-voltage industrial applications.
- Reduces mechanical stress on the compressor during cold-weather startups.
How do I test the S1-025-32895-000 for proper operation?
Technicians should check for continuity and verify resistance using a multimeter; the Ohms reading should stay consistent with a 27W power draw at the rated voltage.
Is this heater compatible with standard residential units?
This specific model is rated for 1000V applications; always verify the voltage requirements of your control circuit and compressor housing before installation.
When should the crankcase heater be energized?
The heater must remain energized whenever the compressor is in the off-cycle to prevent liquid refrigerant from settling in the oil.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
