York S1-025-31990-000 TXV
Engineered for high-capacity applications, the York S1-025-31990-000 TXV is a critical fluid-control component designed to maintain precise superheat in 5 ton R-22 HVAC systems. This genuine York OEM replacement part features a secure bolt-on installation, eliminating the need for brazing at the valve body and reducing the risk of internal heat damage during setup. With a 30-inch capillary tube, this thermostatic expansion valve provides technicians with the flexibility needed for optimal sensing bulb placement on the suction line, ensuring accurate feedback for refrigerant metering.
Built to handle the demanding flow requirements of 5-ton evaporators, this York R-22 expansion valve prevents liquid slugging and protects the compressor by modulating flow based on real-time load conditions. Its bolt-on design is specifically tailored for York, Coleman, and Luxaire air conditioning units, including compatibility with model F3FP060H06TG. Integrating this S1-025-31990-000 TXV into your repair or maintenance routine ensures the system operates within factory specifications, maximizing heat transfer efficiency and stabilizing evaporator pressures.
Key Benefit List:
- Optimized Superheat Control: Provides precise refrigerant metering to improve system efficiency and maintain a consistent cooling profile.
- Simplified Installation: The bolt-on connection type allows for a faster swap-out without the thermal risks associated with brazing near sensitive valve internals.
- Extended Capillary Reach: Features a 30-inch capillary length, allowing for professional sensing bulb positioning and easier insulation.
- System Reliability: Actively protects against compressor flooding, an essential function for high-tonnage 5-ton AC units.
- Direct OEM Fit: Specifically engineered for York and Coleman R-22 systems, cross-referenced with part number 209D92.
Common Questions:
Does this TXV work with R-410A systems?
No, this specific valve is designed and calibrated exclusively for R-22 refrigerant. Using it with R-410A will lead to incorrect metering and potential system failure due to the differing pressure requirements of the refrigerants.
Will this valve fit other brands besides York?
While it is an OEM part for York, Luxaire, and Coleman, it is primarily compatible with units requiring a bolt-on 5-ton TXV. Always verify your specific air handler or coil model number against the S1-025-31990-000 specifications before installation.
Is a hard start kit required with this valve?
For many 5-ton reciprocating compressor systems utilizing a TXV, a hard start kit is highly recommended to assist with the increased pressure differential during startup, particularly if the system does not already have one installed from the factory.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
York S1-025-31990-000 TXV
Engineered for high-capacity applications, the York S1-025-31990-000 TXV is a critical fluid-control component designed to maintain precise superheat in 5 ton R-22 HVAC systems. This genuine York OEM replacement part features a secure bolt-on installation, eliminating the need for brazing at the valve body and reducing the risk of internal heat damage during setup. With a 30-inch capillary tube, this thermostatic expansion valve provides technicians with the flexibility needed for optimal sensing bulb placement on the suction line, ensuring accurate feedback for refrigerant metering.
Built to handle the demanding flow requirements of 5-ton evaporators, this York R-22 expansion valve prevents liquid slugging and protects the compressor by modulating flow based on real-time load conditions. Its bolt-on design is specifically tailored for York, Coleman, and Luxaire air conditioning units, including compatibility with model F3FP060H06TG. Integrating this S1-025-31990-000 TXV into your repair or maintenance routine ensures the system operates within factory specifications, maximizing heat transfer efficiency and stabilizing evaporator pressures.
Key Benefit List:
- Optimized Superheat Control: Provides precise refrigerant metering to improve system efficiency and maintain a consistent cooling profile.
- Simplified Installation: The bolt-on connection type allows for a faster swap-out without the thermal risks associated with brazing near sensitive valve internals.
- Extended Capillary Reach: Features a 30-inch capillary length, allowing for professional sensing bulb positioning and easier insulation.
- System Reliability: Actively protects against compressor flooding, an essential function for high-tonnage 5-ton AC units.
- Direct OEM Fit: Specifically engineered for York and Coleman R-22 systems, cross-referenced with part number 209D92.
Common Questions:
Does this TXV work with R-410A systems?
No, this specific valve is designed and calibrated exclusively for R-22 refrigerant. Using it with R-410A will lead to incorrect metering and potential system failure due to the differing pressure requirements of the refrigerants.
Will this valve fit other brands besides York?
While it is an OEM part for York, Luxaire, and Coleman, it is primarily compatible with units requiring a bolt-on 5-ton TXV. Always verify your specific air handler or coil model number against the S1-025-31990-000 specifications before installation.
Is a hard start kit required with this valve?
For many 5-ton reciprocating compressor systems utilizing a TXV, a hard start kit is highly recommended to assist with the increased pressure differential during startup, particularly if the system does not already have one installed from the factory.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engineered for high-capacity applications, the York S1-025-31990-000 TXV is a critical fluid-control component designed to maintain precise superheat in 5 ton R-22 HVAC systems. This genuine York OEM replacement part features a secure bolt-on installation, eliminating the need for brazing at the valve body and reducing the risk of internal heat damage during setup. With a 30-inch capillary tube, this thermostatic expansion valve provides technicians with the flexibility needed for optimal sensing bulb placement on the suction line, ensuring accurate feedback for refrigerant metering.
Built to handle the demanding flow requirements of 5-ton evaporators, this York R-22 expansion valve prevents liquid slugging and protects the compressor by modulating flow based on real-time load conditions. Its bolt-on design is specifically tailored for York, Coleman, and Luxaire air conditioning units, including compatibility with model F3FP060H06TG. Integrating this S1-025-31990-000 TXV into your repair or maintenance routine ensures the system operates within factory specifications, maximizing heat transfer efficiency and stabilizing evaporator pressures.
Key Benefit List:
- Optimized Superheat Control: Provides precise refrigerant metering to improve system efficiency and maintain a consistent cooling profile.
- Simplified Installation: The bolt-on connection type allows for a faster swap-out without the thermal risks associated with brazing near sensitive valve internals.
- Extended Capillary Reach: Features a 30-inch capillary length, allowing for professional sensing bulb positioning and easier insulation.
- System Reliability: Actively protects against compressor flooding, an essential function for high-tonnage 5-ton AC units.
- Direct OEM Fit: Specifically engineered for York and Coleman R-22 systems, cross-referenced with part number 209D92.
Common Questions:
Does this TXV work with R-410A systems?
No, this specific valve is designed and calibrated exclusively for R-22 refrigerant. Using it with R-410A will lead to incorrect metering and potential system failure due to the differing pressure requirements of the refrigerants.
Will this valve fit other brands besides York?
While it is an OEM part for York, Luxaire, and Coleman, it is primarily compatible with units requiring a bolt-on 5-ton TXV. Always verify your specific air handler or coil model number against the S1-025-31990-000 specifications before installation.
Is a hard start kit required with this valve?
For many 5-ton reciprocating compressor systems utilizing a TXV, a hard start kit is highly recommended to assist with the increased pressure differential during startup, particularly if the system does not already have one installed from the factory.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
