York S1-024-36281-000 Relay
The York S1-024-36281-000 Relay is a heavy-duty, OEM-grade DPST (Double Pole Single Throw) switching component designed specifically for logic-controlled HVAC systems. Engineered for high-cycle reliability in residential and light commercial applications, this 24V relay control manages high-current loads for blowers, pumps, and condenser fan motors. Its double pole design provides simultaneous switching of two separate circuits, ensuring synchronized power distribution to critical system components. As a direct OEM HVAC replacement part, it installs into the existing control subbase or DIN rail configuration without modification, maintaining the original equipment’s performance specifications and safety standards.
Built for the rigors of field service, this York relay features durable contact points that resist pitting and carbon buildup during inductive load switching. The low-voltage 24VAC coil is optimized for precise activation even during voltage fluctuations common in peak demand periods. For technicians performing system diagnostics, the transparent housing or clear labeling allows for rapid visual inspection of the contact state. Integrating the S1-024-36281-000 ensures seamless communication between the thermostat and the high-voltage load centers, preventing the premature failure of expensive motors by providing clean, bounce-free electrical switching.
Key Benefits
- High Ampacity Contacts: Designed to handle high-inductive motor loads without excessive arcing or heat generation.
- DPST Configuration: Enables the control of two isolated circuits at once, streamlining complex wiring architectures in air handlers and furnaces.
- OEM Compatibility: Exact replacement for York, Luxaire, and Coleman equipment, eliminating the risk of mismatched coil resistance or pinout errors.
- 24V Control Logic: Standardized coil voltage ensures compatibility with all modern HVAC 24VAC control boards and transformers.
Common Questions
What are the typical symptoms of a failing S1-024-36281-000 relay?
Common signs include a "clicking" noise without the load (fan or compressor) starting, visible burn marks on the contact points, or a hum indicating the coil is energized but the contacts have failed to close.
Is this relay suitable for both heating and cooling applications?
Yes, this DPST switching relay is frequently utilized in furnace sequencers, heat pump defrost boards, and air conditioner condenser circuits requiring dual-line switching.
Can I use this to replace a single-pole relay?
While a double-pole relay can function in a single-pole application by using only one set of contacts, it is best practice for technicians to match the specific pole and throw configuration required by the manufacturer's wiring diagram.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $40.45
-65%$40.45
$14.16York S1-024-36281-000 Relay
The York S1-024-36281-000 Relay is a heavy-duty, OEM-grade DPST (Double Pole Single Throw) switching component designed specifically for logic-controlled HVAC systems. Engineered for high-cycle reliability in residential and light commercial applications, this 24V relay control manages high-current loads for blowers, pumps, and condenser fan motors. Its double pole design provides simultaneous switching of two separate circuits, ensuring synchronized power distribution to critical system components. As a direct OEM HVAC replacement part, it installs into the existing control subbase or DIN rail configuration without modification, maintaining the original equipment’s performance specifications and safety standards.
Built for the rigors of field service, this York relay features durable contact points that resist pitting and carbon buildup during inductive load switching. The low-voltage 24VAC coil is optimized for precise activation even during voltage fluctuations common in peak demand periods. For technicians performing system diagnostics, the transparent housing or clear labeling allows for rapid visual inspection of the contact state. Integrating the S1-024-36281-000 ensures seamless communication between the thermostat and the high-voltage load centers, preventing the premature failure of expensive motors by providing clean, bounce-free electrical switching.
Key Benefits
- High Ampacity Contacts: Designed to handle high-inductive motor loads without excessive arcing or heat generation.
- DPST Configuration: Enables the control of two isolated circuits at once, streamlining complex wiring architectures in air handlers and furnaces.
- OEM Compatibility: Exact replacement for York, Luxaire, and Coleman equipment, eliminating the risk of mismatched coil resistance or pinout errors.
- 24V Control Logic: Standardized coil voltage ensures compatibility with all modern HVAC 24VAC control boards and transformers.
Common Questions
What are the typical symptoms of a failing S1-024-36281-000 relay?
Common signs include a "clicking" noise without the load (fan or compressor) starting, visible burn marks on the contact points, or a hum indicating the coil is energized but the contacts have failed to close.
Is this relay suitable for both heating and cooling applications?
Yes, this DPST switching relay is frequently utilized in furnace sequencers, heat pump defrost boards, and air conditioner condenser circuits requiring dual-line switching.
Can I use this to replace a single-pole relay?
While a double-pole relay can function in a single-pole application by using only one set of contacts, it is best practice for technicians to match the specific pole and throw configuration required by the manufacturer's wiring diagram.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-024-36281-000 Relay is a heavy-duty, OEM-grade DPST (Double Pole Single Throw) switching component designed specifically for logic-controlled HVAC systems. Engineered for high-cycle reliability in residential and light commercial applications, this 24V relay control manages high-current loads for blowers, pumps, and condenser fan motors. Its double pole design provides simultaneous switching of two separate circuits, ensuring synchronized power distribution to critical system components. As a direct OEM HVAC replacement part, it installs into the existing control subbase or DIN rail configuration without modification, maintaining the original equipment’s performance specifications and safety standards.
Built for the rigors of field service, this York relay features durable contact points that resist pitting and carbon buildup during inductive load switching. The low-voltage 24VAC coil is optimized for precise activation even during voltage fluctuations common in peak demand periods. For technicians performing system diagnostics, the transparent housing or clear labeling allows for rapid visual inspection of the contact state. Integrating the S1-024-36281-000 ensures seamless communication between the thermostat and the high-voltage load centers, preventing the premature failure of expensive motors by providing clean, bounce-free electrical switching.
Key Benefits
- High Ampacity Contacts: Designed to handle high-inductive motor loads without excessive arcing or heat generation.
- DPST Configuration: Enables the control of two isolated circuits at once, streamlining complex wiring architectures in air handlers and furnaces.
- OEM Compatibility: Exact replacement for York, Luxaire, and Coleman equipment, eliminating the risk of mismatched coil resistance or pinout errors.
- 24V Control Logic: Standardized coil voltage ensures compatibility with all modern HVAC 24VAC control boards and transformers.
Common Questions
What are the typical symptoms of a failing S1-024-36281-000 relay?
Common signs include a "clicking" noise without the load (fan or compressor) starting, visible burn marks on the contact points, or a hum indicating the coil is energized but the contacts have failed to close.
Is this relay suitable for both heating and cooling applications?
Yes, this DPST switching relay is frequently utilized in furnace sequencers, heat pump defrost boards, and air conditioner condenser circuits requiring dual-line switching.
Can I use this to replace a single-pole relay?
While a double-pole relay can function in a single-pole application by using only one set of contacts, it is best practice for technicians to match the specific pole and throw configuration required by the manufacturer's wiring diagram.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
