York S1-024-35847-001 Motor
The York S1-024-35847-001 Blower Motor is a high-performance, 3/4 HP direct-drive replacement engineered specifically for 115V residential furnace and air handler applications. Running at a nominal 1050 RPM, this motor is designed to maintain the precise static pressure required for optimal airflow across the heat exchanger. As a genuine Source 1 OEM part, it ensures a seamless drop-in installation, maintaining the electrical integrity and physical mounting specifications of the original factory assembly. This permanent split capacitor (PSC) motor features a standard 48-frame diameter and is optimized for multi-speed configurations, allowing for tailored airflow based on the system’s heating or cooling demands. When replacing a failed S1-024-35847-001, technicians should verify the amperage draw and shaft dimensions to ensure synchronization with the existing blower wheel, preventing vibration and premature bearing wear in high-cycle environments.
Key Benefits
- Precision OEM Compatibility: Designed for an exact fit in York, Coleman, and Luxaire equipment, eliminating the need for universal mounting kits.
- Reliable High-Torque Output: The 3/4 HP rating provides the necessary power to overcome high duct static in modern HVAC systems.
- Internal Thermal Protection: Features an automatic reset thermal overload to protect windings from overheating during restricted airflow.
- Standardized Electrical Specs: Operates on standard 115V power with clearly color-coded leads for rapid field wiring.
Common Questions
Which run capacitor does this motor require?
Most York blower motor replacements in this class require a dedicated run capacitor. Always refer to the motor’s nameplate for the specific microfarad (MFD) rating to ensure the motor starts efficiently and runs at the correct temperature.
Is this motor reversible?
The S1-024-35847-001 is typically set to a specific rotation (often CCWLE) for blower wheel optimization. Technicians should verify rotation requirements against the existing unit’s specifications before completing the install.
Can I use this 3/4 HP motor to replace a lower horsepower motor?
It is critical to match the horsepower of the original motor. Using a motor with higher horsepower can lead to excessive CFM, potentially causing noise issues or moisture carry-over in cooling mode.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $852.04
-65%$852.04
$298.21York S1-024-35847-001 Motor
The York S1-024-35847-001 Blower Motor is a high-performance, 3/4 HP direct-drive replacement engineered specifically for 115V residential furnace and air handler applications. Running at a nominal 1050 RPM, this motor is designed to maintain the precise static pressure required for optimal airflow across the heat exchanger. As a genuine Source 1 OEM part, it ensures a seamless drop-in installation, maintaining the electrical integrity and physical mounting specifications of the original factory assembly. This permanent split capacitor (PSC) motor features a standard 48-frame diameter and is optimized for multi-speed configurations, allowing for tailored airflow based on the system’s heating or cooling demands. When replacing a failed S1-024-35847-001, technicians should verify the amperage draw and shaft dimensions to ensure synchronization with the existing blower wheel, preventing vibration and premature bearing wear in high-cycle environments.
Key Benefits
- Precision OEM Compatibility: Designed for an exact fit in York, Coleman, and Luxaire equipment, eliminating the need for universal mounting kits.
- Reliable High-Torque Output: The 3/4 HP rating provides the necessary power to overcome high duct static in modern HVAC systems.
- Internal Thermal Protection: Features an automatic reset thermal overload to protect windings from overheating during restricted airflow.
- Standardized Electrical Specs: Operates on standard 115V power with clearly color-coded leads for rapid field wiring.
Common Questions
Which run capacitor does this motor require?
Most York blower motor replacements in this class require a dedicated run capacitor. Always refer to the motor’s nameplate for the specific microfarad (MFD) rating to ensure the motor starts efficiently and runs at the correct temperature.
Is this motor reversible?
The S1-024-35847-001 is typically set to a specific rotation (often CCWLE) for blower wheel optimization. Technicians should verify rotation requirements against the existing unit’s specifications before completing the install.
Can I use this 3/4 HP motor to replace a lower horsepower motor?
It is critical to match the horsepower of the original motor. Using a motor with higher horsepower can lead to excessive CFM, potentially causing noise issues or moisture carry-over in cooling mode.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-024-35847-001 Blower Motor is a high-performance, 3/4 HP direct-drive replacement engineered specifically for 115V residential furnace and air handler applications. Running at a nominal 1050 RPM, this motor is designed to maintain the precise static pressure required for optimal airflow across the heat exchanger. As a genuine Source 1 OEM part, it ensures a seamless drop-in installation, maintaining the electrical integrity and physical mounting specifications of the original factory assembly. This permanent split capacitor (PSC) motor features a standard 48-frame diameter and is optimized for multi-speed configurations, allowing for tailored airflow based on the system’s heating or cooling demands. When replacing a failed S1-024-35847-001, technicians should verify the amperage draw and shaft dimensions to ensure synchronization with the existing blower wheel, preventing vibration and premature bearing wear in high-cycle environments.
Key Benefits
- Precision OEM Compatibility: Designed for an exact fit in York, Coleman, and Luxaire equipment, eliminating the need for universal mounting kits.
- Reliable High-Torque Output: The 3/4 HP rating provides the necessary power to overcome high duct static in modern HVAC systems.
- Internal Thermal Protection: Features an automatic reset thermal overload to protect windings from overheating during restricted airflow.
- Standardized Electrical Specs: Operates on standard 115V power with clearly color-coded leads for rapid field wiring.
Common Questions
Which run capacitor does this motor require?
Most York blower motor replacements in this class require a dedicated run capacitor. Always refer to the motor’s nameplate for the specific microfarad (MFD) rating to ensure the motor starts efficiently and runs at the correct temperature.
Is this motor reversible?
The S1-024-35847-001 is typically set to a specific rotation (often CCWLE) for blower wheel optimization. Technicians should verify rotation requirements against the existing unit’s specifications before completing the install.
Can I use this 3/4 HP motor to replace a lower horsepower motor?
It is critical to match the horsepower of the original motor. Using a motor with higher horsepower can lead to excessive CFM, potentially causing noise issues or moisture carry-over in cooling mode.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
