York S1-024-35269-000 Switch
The York S1-024-35269-000 Switch is a critical OEM replacement pressure switch designed for precision monitoring in HVAC systems and residential furnaces. This SPNO (Single-Pole, Normally Open) device features a close-on-fall mechanism, ensuring that the system only initiates the ignition sequence when proper vacuum or airflow conditions are met within the inducer or draft assembly. Calibrated with an actuation point of .55" WC and a reset point of 1.3" WC, it provides reliable 2-stage air pressure management to prevent unsafe combustion cycles caused by blocked vents or motor failure.
For service technicians, the York S1-024-35269-000 offers a direct drop-in solution for York, Coleman, and Luxaire equipment, maintaining factory safety parameters without the need for field modifications. Its robust construction minimizes nuisance trips and ensures consistent electrical continuity under high-demand heating cycles. When replacing a furnace air pressure switch, verifying these specific water column ratings is essential for maintaining equipment certification and preventing carbon monoxide risks associated with improper venting.
Key Benefits- Genuine York OEM replacement part ensures exact structural and electrical compatibility.
- Features SPNO close on fall logic for precise safety interlock functionality.
- Differential settings of .55" actuation and 1.3" reset optimize 2-stage system performance.
- Directly replaces legacy part numbers for York, Coleman, and Luxaire furnaces.
- Rugged casing designed to withstand the thermal stressors of HVAC induction systems.
What does a close-on-fall pressure switch do in a furnace?
A close-on-fall switch like the S1-024-35269-000 remains open until the pressure drops to a specific setpoint (venting vacuum), at which point it closes the circuit to allow the furnace to proceed with the ignition sequence.
Can I use a universal pressure switch instead of the York S1-024-35269-000?
While universal switches exist, using the OEM York S1-024-35269-000 is recommended because its specific .55/1.3" WC calibration is factory-set to match the blower performance and venting requirements of the specific equipment model.
How do I identify if the York S1-024-35269-000 switch is failing?
Common indicators include the furnace inducer motor running without ignite sequence, "pressure switch open" fault codes on the control board, or failure of the contacts to close once the .55" water column threshold is reached.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
York S1-024-35269-000 Switch
The York S1-024-35269-000 Switch is a critical OEM replacement pressure switch designed for precision monitoring in HVAC systems and residential furnaces. This SPNO (Single-Pole, Normally Open) device features a close-on-fall mechanism, ensuring that the system only initiates the ignition sequence when proper vacuum or airflow conditions are met within the inducer or draft assembly. Calibrated with an actuation point of .55" WC and a reset point of 1.3" WC, it provides reliable 2-stage air pressure management to prevent unsafe combustion cycles caused by blocked vents or motor failure.
For service technicians, the York S1-024-35269-000 offers a direct drop-in solution for York, Coleman, and Luxaire equipment, maintaining factory safety parameters without the need for field modifications. Its robust construction minimizes nuisance trips and ensures consistent electrical continuity under high-demand heating cycles. When replacing a furnace air pressure switch, verifying these specific water column ratings is essential for maintaining equipment certification and preventing carbon monoxide risks associated with improper venting.
Key Benefits- Genuine York OEM replacement part ensures exact structural and electrical compatibility.
- Features SPNO close on fall logic for precise safety interlock functionality.
- Differential settings of .55" actuation and 1.3" reset optimize 2-stage system performance.
- Directly replaces legacy part numbers for York, Coleman, and Luxaire furnaces.
- Rugged casing designed to withstand the thermal stressors of HVAC induction systems.
What does a close-on-fall pressure switch do in a furnace?
A close-on-fall switch like the S1-024-35269-000 remains open until the pressure drops to a specific setpoint (venting vacuum), at which point it closes the circuit to allow the furnace to proceed with the ignition sequence.
Can I use a universal pressure switch instead of the York S1-024-35269-000?
While universal switches exist, using the OEM York S1-024-35269-000 is recommended because its specific .55/1.3" WC calibration is factory-set to match the blower performance and venting requirements of the specific equipment model.
How do I identify if the York S1-024-35269-000 switch is failing?
Common indicators include the furnace inducer motor running without ignite sequence, "pressure switch open" fault codes on the control board, or failure of the contacts to close once the .55" water column threshold is reached.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-024-35269-000 Switch is a critical OEM replacement pressure switch designed for precision monitoring in HVAC systems and residential furnaces. This SPNO (Single-Pole, Normally Open) device features a close-on-fall mechanism, ensuring that the system only initiates the ignition sequence when proper vacuum or airflow conditions are met within the inducer or draft assembly. Calibrated with an actuation point of .55" WC and a reset point of 1.3" WC, it provides reliable 2-stage air pressure management to prevent unsafe combustion cycles caused by blocked vents or motor failure.
For service technicians, the York S1-024-35269-000 offers a direct drop-in solution for York, Coleman, and Luxaire equipment, maintaining factory safety parameters without the need for field modifications. Its robust construction minimizes nuisance trips and ensures consistent electrical continuity under high-demand heating cycles. When replacing a furnace air pressure switch, verifying these specific water column ratings is essential for maintaining equipment certification and preventing carbon monoxide risks associated with improper venting.
Key Benefits- Genuine York OEM replacement part ensures exact structural and electrical compatibility.
- Features SPNO close on fall logic for precise safety interlock functionality.
- Differential settings of .55" actuation and 1.3" reset optimize 2-stage system performance.
- Directly replaces legacy part numbers for York, Coleman, and Luxaire furnaces.
- Rugged casing designed to withstand the thermal stressors of HVAC induction systems.
What does a close-on-fall pressure switch do in a furnace?
A close-on-fall switch like the S1-024-35269-000 remains open until the pressure drops to a specific setpoint (venting vacuum), at which point it closes the circuit to allow the furnace to proceed with the ignition sequence.
Can I use a universal pressure switch instead of the York S1-024-35269-000?
While universal switches exist, using the OEM York S1-024-35269-000 is recommended because its specific .55/1.3" WC calibration is factory-set to match the blower performance and venting requirements of the specific equipment model.
How do I identify if the York S1-024-35269-000 switch is failing?
Common indicators include the furnace inducer motor running without ignite sequence, "pressure switch open" fault codes on the control board, or failure of the contacts to close once the .55" water column threshold is reached.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
