York S1-024-25006-704 Pressure Switch
The York S1-024-25006-704 Pressure Switch is a critical safety component designed for precise differential pressure monitoring in residential and commercial York, Coleman, and Luxaire furnaces. Engineered with a specific set point of .90" WC (Water Column), this genuine OEM furnace part ensures the draft inducer motor is moving sufficient air to clear combustion gases before allowing the ignition sequence to proceed. Its robust construction features a high-grade diaphragm and Teflon seals to prevent contamination from dust and moisture, ensuring consistent operation even in high-demand heating applications.
For technicians in the field, the S1-024-25006-704 serves as a direct replacement to resolve furnace pressure switch stuck open codes and intermittent short cycling. This SPST (Single Pole Single Throw) switch is calibrated for accuracy to avoid nuisance trips while maintaining strict safety standards. Whether you are performing a seasonal tune-up or an emergency repair, utilizing an OEM York pressure switch guarantees compatibility with existing vacuum tubing and mounting brackets, eliminating the need for field modifications and ensuring the system returns to its original manufacturer specifications.
Key Benefits for HVAC Professionals- Factory Calibrated 0.90" WC: Ensures exact pressure threshold detection for safe furnace ignition and venting.
- OEM Compatibility: Designed specifically for York HVAC systems, reducing installation time and eliminating fitment issues.
- Durable internal Diaphragm: High-quality materials resist rupturing and environmental wear for long-term system reliability.
- Standard Electrical Terminals: Features common spade connectors for a seamless wiring transition during component replacement.
- Contaminant Protection: Integrated Teflon seals protect internal contacts from moisture and debris common in high-efficiency furnaces.
How do I troubleshoot a pressure switch code on a York furnace?
Start by checking for blocked venting, a clogged inducer port, or water in the vacuum lines. Use a manometer to verify if the inducer is pulling more than 0.90" WC; if the vacuum is sufficient but the S1-024-25006-704 fails to close, the internal diaphragm or contacts may be faulty.
Can I use a universal pressure switch instead of the S1-024-25006-704?
While universal switches exist, HVAC technicians recommend using the genuine OEM York part to ensure the set point matches the original design, as incorrect calibration can lead to unsafe operation or frequent lockout errors.
What causes this switch to fail prematurely?
Common causes include cracked vacuum hoses, moisture buildup from condensing furnace drainage issues, or electrical corrosion at the terminal connections. Regular HVAC maintenance should include inspecting the tubing for brittle spots or debris.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
York S1-024-25006-704 Pressure Switch
The York S1-024-25006-704 Pressure Switch is a critical safety component designed for precise differential pressure monitoring in residential and commercial York, Coleman, and Luxaire furnaces. Engineered with a specific set point of .90" WC (Water Column), this genuine OEM furnace part ensures the draft inducer motor is moving sufficient air to clear combustion gases before allowing the ignition sequence to proceed. Its robust construction features a high-grade diaphragm and Teflon seals to prevent contamination from dust and moisture, ensuring consistent operation even in high-demand heating applications.
For technicians in the field, the S1-024-25006-704 serves as a direct replacement to resolve furnace pressure switch stuck open codes and intermittent short cycling. This SPST (Single Pole Single Throw) switch is calibrated for accuracy to avoid nuisance trips while maintaining strict safety standards. Whether you are performing a seasonal tune-up or an emergency repair, utilizing an OEM York pressure switch guarantees compatibility with existing vacuum tubing and mounting brackets, eliminating the need for field modifications and ensuring the system returns to its original manufacturer specifications.
Key Benefits for HVAC Professionals- Factory Calibrated 0.90" WC: Ensures exact pressure threshold detection for safe furnace ignition and venting.
- OEM Compatibility: Designed specifically for York HVAC systems, reducing installation time and eliminating fitment issues.
- Durable internal Diaphragm: High-quality materials resist rupturing and environmental wear for long-term system reliability.
- Standard Electrical Terminals: Features common spade connectors for a seamless wiring transition during component replacement.
- Contaminant Protection: Integrated Teflon seals protect internal contacts from moisture and debris common in high-efficiency furnaces.
How do I troubleshoot a pressure switch code on a York furnace?
Start by checking for blocked venting, a clogged inducer port, or water in the vacuum lines. Use a manometer to verify if the inducer is pulling more than 0.90" WC; if the vacuum is sufficient but the S1-024-25006-704 fails to close, the internal diaphragm or contacts may be faulty.
Can I use a universal pressure switch instead of the S1-024-25006-704?
While universal switches exist, HVAC technicians recommend using the genuine OEM York part to ensure the set point matches the original design, as incorrect calibration can lead to unsafe operation or frequent lockout errors.
What causes this switch to fail prematurely?
Common causes include cracked vacuum hoses, moisture buildup from condensing furnace drainage issues, or electrical corrosion at the terminal connections. Regular HVAC maintenance should include inspecting the tubing for brittle spots or debris.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York S1-024-25006-704 Pressure Switch is a critical safety component designed for precise differential pressure monitoring in residential and commercial York, Coleman, and Luxaire furnaces. Engineered with a specific set point of .90" WC (Water Column), this genuine OEM furnace part ensures the draft inducer motor is moving sufficient air to clear combustion gases before allowing the ignition sequence to proceed. Its robust construction features a high-grade diaphragm and Teflon seals to prevent contamination from dust and moisture, ensuring consistent operation even in high-demand heating applications.
For technicians in the field, the S1-024-25006-704 serves as a direct replacement to resolve furnace pressure switch stuck open codes and intermittent short cycling. This SPST (Single Pole Single Throw) switch is calibrated for accuracy to avoid nuisance trips while maintaining strict safety standards. Whether you are performing a seasonal tune-up or an emergency repair, utilizing an OEM York pressure switch guarantees compatibility with existing vacuum tubing and mounting brackets, eliminating the need for field modifications and ensuring the system returns to its original manufacturer specifications.
Key Benefits for HVAC Professionals- Factory Calibrated 0.90" WC: Ensures exact pressure threshold detection for safe furnace ignition and venting.
- OEM Compatibility: Designed specifically for York HVAC systems, reducing installation time and eliminating fitment issues.
- Durable internal Diaphragm: High-quality materials resist rupturing and environmental wear for long-term system reliability.
- Standard Electrical Terminals: Features common spade connectors for a seamless wiring transition during component replacement.
- Contaminant Protection: Integrated Teflon seals protect internal contacts from moisture and debris common in high-efficiency furnaces.
How do I troubleshoot a pressure switch code on a York furnace?
Start by checking for blocked venting, a clogged inducer port, or water in the vacuum lines. Use a manometer to verify if the inducer is pulling more than 0.90" WC; if the vacuum is sufficient but the S1-024-25006-704 fails to close, the internal diaphragm or contacts may be faulty.
Can I use a universal pressure switch instead of the S1-024-25006-704?
While universal switches exist, HVAC technicians recommend using the genuine OEM York part to ensure the set point matches the original design, as incorrect calibration can lead to unsafe operation or frequent lockout errors.
What causes this switch to fail prematurely?
Common causes include cracked vacuum hoses, moisture buildup from condensing furnace drainage issues, or electrical corrosion at the terminal connections. Regular HVAC maintenance should include inspecting the tubing for brittle spots or debris.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
