York 025-43893-000 E-Link
The York 025-43893-000 E-Link is a critical high-performance communications gateway designed to bridge York HVAC equipment with Building Automation Systems (BAS). This E-Link with Serial Ports allows for seamless integration into York OptiView and Latitude-based control panels, enabling localized diagnostics and remote monitoring. As a direct replacement for legacy MicroGateways, the S1-025-43893-000 consolidates multiple equipment profiles into a single board, supporting industry-standard open communication protocols including BACnet MS/TP, Modbus RTU, N2, and LONWORKS FTT10. Its architecture features four dedicated serial ports: Port 2 is reserved for direct equipment connection via YorkTalk II or III, while Ports 1 and 4 manage network-level communication. With simple DIP switch configuration for quick-start settings, technicians can efficiently map equipment data to BAS variables without field firmware modifications. This module is essential for optimizing chiller performance and maintaining reliable HVAC network connectivity in demanding industrial environments.
Key Benefits- Multi-Protocol Support: Integrates natively with BACnet MS/TP, Modbus RTU, N2, and LONWORKS without additional hardware.
- Enhanced Diagnostics: Features a third auxiliary port for real-time monitoring and HVAC troubleshooting using standard VT-100 emulation.
- Seamless Integration: Pre-configured with York chiller profiles and rooftop unit data maps for reduced commissioning time.
- Hardware Efficiency: Consolidates profiles into a single PCB application, replacing multiple older MicroGateway configurations.
Is the 025-43893-000 compatible with older YorkTalk protocols?
The E-Link supports YorkTalk II and YorkTalk III. However, it does not support legacy ISN, ASCII, or YorkTalk I protocols.
How do I configure the protocol for a specific BAS network?
Protocol selection and equipment profiling are achieved via onsite DIP switch settings, eliminating the need for complex programming tools during initial setup.
Can this module be mounted externally?
While designed for internal mounting within OptiView or Latitude panels, it can be installed in a standalone NEMA-rated enclosure if external placement is required for local site conditions.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $694.85
-65%$694.85
$243.20York 025-43893-000 E-Link
The York 025-43893-000 E-Link is a critical high-performance communications gateway designed to bridge York HVAC equipment with Building Automation Systems (BAS). This E-Link with Serial Ports allows for seamless integration into York OptiView and Latitude-based control panels, enabling localized diagnostics and remote monitoring. As a direct replacement for legacy MicroGateways, the S1-025-43893-000 consolidates multiple equipment profiles into a single board, supporting industry-standard open communication protocols including BACnet MS/TP, Modbus RTU, N2, and LONWORKS FTT10. Its architecture features four dedicated serial ports: Port 2 is reserved for direct equipment connection via YorkTalk II or III, while Ports 1 and 4 manage network-level communication. With simple DIP switch configuration for quick-start settings, technicians can efficiently map equipment data to BAS variables without field firmware modifications. This module is essential for optimizing chiller performance and maintaining reliable HVAC network connectivity in demanding industrial environments.
Key Benefits- Multi-Protocol Support: Integrates natively with BACnet MS/TP, Modbus RTU, N2, and LONWORKS without additional hardware.
- Enhanced Diagnostics: Features a third auxiliary port for real-time monitoring and HVAC troubleshooting using standard VT-100 emulation.
- Seamless Integration: Pre-configured with York chiller profiles and rooftop unit data maps for reduced commissioning time.
- Hardware Efficiency: Consolidates profiles into a single PCB application, replacing multiple older MicroGateway configurations.
Is the 025-43893-000 compatible with older YorkTalk protocols?
The E-Link supports YorkTalk II and YorkTalk III. However, it does not support legacy ISN, ASCII, or YorkTalk I protocols.
How do I configure the protocol for a specific BAS network?
Protocol selection and equipment profiling are achieved via onsite DIP switch settings, eliminating the need for complex programming tools during initial setup.
Can this module be mounted externally?
While designed for internal mounting within OptiView or Latitude panels, it can be installed in a standalone NEMA-rated enclosure if external placement is required for local site conditions.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The York 025-43893-000 E-Link is a critical high-performance communications gateway designed to bridge York HVAC equipment with Building Automation Systems (BAS). This E-Link with Serial Ports allows for seamless integration into York OptiView and Latitude-based control panels, enabling localized diagnostics and remote monitoring. As a direct replacement for legacy MicroGateways, the S1-025-43893-000 consolidates multiple equipment profiles into a single board, supporting industry-standard open communication protocols including BACnet MS/TP, Modbus RTU, N2, and LONWORKS FTT10. Its architecture features four dedicated serial ports: Port 2 is reserved for direct equipment connection via YorkTalk II or III, while Ports 1 and 4 manage network-level communication. With simple DIP switch configuration for quick-start settings, technicians can efficiently map equipment data to BAS variables without field firmware modifications. This module is essential for optimizing chiller performance and maintaining reliable HVAC network connectivity in demanding industrial environments.
Key Benefits- Multi-Protocol Support: Integrates natively with BACnet MS/TP, Modbus RTU, N2, and LONWORKS without additional hardware.
- Enhanced Diagnostics: Features a third auxiliary port for real-time monitoring and HVAC troubleshooting using standard VT-100 emulation.
- Seamless Integration: Pre-configured with York chiller profiles and rooftop unit data maps for reduced commissioning time.
- Hardware Efficiency: Consolidates profiles into a single PCB application, replacing multiple older MicroGateway configurations.
Is the 025-43893-000 compatible with older YorkTalk protocols?
The E-Link supports YorkTalk II and YorkTalk III. However, it does not support legacy ISN, ASCII, or YorkTalk I protocols.
How do I configure the protocol for a specific BAS network?
Protocol selection and equipment profiling are achieved via onsite DIP switch settings, eliminating the need for complex programming tools during initial setup.
Can this module be mounted externally?
While designed for internal mounting within OptiView or Latitude panels, it can be installed in a standalone NEMA-rated enclosure if external placement is required for local site conditions.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
