Wayne 13666 Lead
The Wayne 13666 Lead is a high-sensitivity Cadmium Sulfide (CdS) Flame Detector engineered for precise flame verification in fuel oil-fired burner systems. This Cadmium-Sulfide photocell functions by varying its electrical resistance based on the intensity of the light within the combustion chamber, allowing the oil primary control to safely monitor for ignition or flame failure. It features a 30-inch lead length to allow for flexible wire routing and secure termination at the F-F terminals of the safety relay.
Built as a direct technical equivalent to the Honeywell C554A1216, this kit includes a 90-degree bracket for optimal sensor orientation, crucial for maintaining accurate sighting and preventing soot accumulation. The cell is hermetically sealed with glass-to-metal bonding to ensure long-term stability against high ambient temperatures, humidity, and combustion fumes. For proper commissioning, technicians should verify a dark resistance exceeding 20,000 ohms and a running flame resistance typically below 1,600 ohms to maintain system reliability and prevent nuisance lockouts.
Key Benefits
- Compatible with Wayne FH oil burners (4 to 13 GPH) and major Honeywell primary controls.
- 30-inch leads provide ample length for complex service retrofits and burner cabinets.
- 90-degree mounting bracket ensures the sensor remains centered in the sight path for maximum sensitivity.
- Hermetically sealed construction prevents sensor degradation from oil fumes and soot.
- Fast light-response times improve safety by initiating faster lockouts during flame failure events.
Common Questions
What is the standard resistance for a healthy Wayne 13666 cad cell?
When the burner is running, a healthy cell should measure between 300 and 1,000 ohms. A reading over 1,600 ohms while a flame is present will typically cause the primary control to trip the reset button.
Can I use this to replace a shorter lead cad cell?
Yes, the 30-inch lead is a universal length that can replace shorter leads (like 14-inch or 15-inch models) by safely securing the excess wire away from moving parts or high-heat zones.
Does this kit include the mounting hardware?
This kit includes the 90-degree "R" type bracket and the plug-in CdS eye for direct mounting to the burner housing or fuel line adaptor.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $58.21
-65%$58.21
$20.37Wayne 13666 Lead
The Wayne 13666 Lead is a high-sensitivity Cadmium Sulfide (CdS) Flame Detector engineered for precise flame verification in fuel oil-fired burner systems. This Cadmium-Sulfide photocell functions by varying its electrical resistance based on the intensity of the light within the combustion chamber, allowing the oil primary control to safely monitor for ignition or flame failure. It features a 30-inch lead length to allow for flexible wire routing and secure termination at the F-F terminals of the safety relay.
Built as a direct technical equivalent to the Honeywell C554A1216, this kit includes a 90-degree bracket for optimal sensor orientation, crucial for maintaining accurate sighting and preventing soot accumulation. The cell is hermetically sealed with glass-to-metal bonding to ensure long-term stability against high ambient temperatures, humidity, and combustion fumes. For proper commissioning, technicians should verify a dark resistance exceeding 20,000 ohms and a running flame resistance typically below 1,600 ohms to maintain system reliability and prevent nuisance lockouts.
Key Benefits
- Compatible with Wayne FH oil burners (4 to 13 GPH) and major Honeywell primary controls.
- 30-inch leads provide ample length for complex service retrofits and burner cabinets.
- 90-degree mounting bracket ensures the sensor remains centered in the sight path for maximum sensitivity.
- Hermetically sealed construction prevents sensor degradation from oil fumes and soot.
- Fast light-response times improve safety by initiating faster lockouts during flame failure events.
Common Questions
What is the standard resistance for a healthy Wayne 13666 cad cell?
When the burner is running, a healthy cell should measure between 300 and 1,000 ohms. A reading over 1,600 ohms while a flame is present will typically cause the primary control to trip the reset button.
Can I use this to replace a shorter lead cad cell?
Yes, the 30-inch lead is a universal length that can replace shorter leads (like 14-inch or 15-inch models) by safely securing the excess wire away from moving parts or high-heat zones.
Does this kit include the mounting hardware?
This kit includes the 90-degree "R" type bracket and the plug-in CdS eye for direct mounting to the burner housing or fuel line adaptor.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Wayne 13666 Lead is a high-sensitivity Cadmium Sulfide (CdS) Flame Detector engineered for precise flame verification in fuel oil-fired burner systems. This Cadmium-Sulfide photocell functions by varying its electrical resistance based on the intensity of the light within the combustion chamber, allowing the oil primary control to safely monitor for ignition or flame failure. It features a 30-inch lead length to allow for flexible wire routing and secure termination at the F-F terminals of the safety relay.
Built as a direct technical equivalent to the Honeywell C554A1216, this kit includes a 90-degree bracket for optimal sensor orientation, crucial for maintaining accurate sighting and preventing soot accumulation. The cell is hermetically sealed with glass-to-metal bonding to ensure long-term stability against high ambient temperatures, humidity, and combustion fumes. For proper commissioning, technicians should verify a dark resistance exceeding 20,000 ohms and a running flame resistance typically below 1,600 ohms to maintain system reliability and prevent nuisance lockouts.
Key Benefits
- Compatible with Wayne FH oil burners (4 to 13 GPH) and major Honeywell primary controls.
- 30-inch leads provide ample length for complex service retrofits and burner cabinets.
- 90-degree mounting bracket ensures the sensor remains centered in the sight path for maximum sensitivity.
- Hermetically sealed construction prevents sensor degradation from oil fumes and soot.
- Fast light-response times improve safety by initiating faster lockouts during flame failure events.
Common Questions
What is the standard resistance for a healthy Wayne 13666 cad cell?
When the burner is running, a healthy cell should measure between 300 and 1,000 ohms. A reading over 1,600 ohms while a flame is present will typically cause the primary control to trip the reset button.
Can I use this to replace a shorter lead cad cell?
Yes, the 30-inch lead is a universal length that can replace shorter leads (like 14-inch or 15-inch models) by safely securing the excess wire away from moving parts or high-heat zones.
Does this kit include the mounting hardware?
This kit includes the 90-degree "R" type bracket and the plug-in CdS eye for direct mounting to the burner housing or fuel line adaptor.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
