Watts 0226060 Dual Switch
The Watts 0226060 (Model SAN89D) is a heavy-duty Low Water Cut-Off (LWCO) dual switch assembly engineered specifically for steam boiler applications requiring a secondary level of safety. Built for rigorous field demands, this unit provides critical boiler burner protection by automatically interrupting the electrical circuit if the water level drops below safe operating parameters, effectively preventing dry-firing and high-cost heat exchanger damage. This SAN89D dual switch configuration is designed for multi-functionality, allowing for simultaneous burner cut-off and alarm or pump controller activation.
For technicians performing a retrofit or repair, the Watts SAN89D features a robust one-piece construction that streamlines installation and ensures precise alignment of the internal float mechanism. Rated for a maximum working pressure of 15 PSI, it is the standard choice for low-pressure steam systems. This replacement float and switch assembly is a genuine Watts part, ensuring direct compatibility with Series SAN89 housings and maintaining the structural integrity of your hydronic or steam system safety loop.
Key Benefits for the Contractor:- Dual-Function Capability: Features two discrete switches to manage both burner shut-down and auxiliary functions like water feeders or alarms.
- Field-Proven Reliability: The San89D L.W.C.O. switch uses a high-grade float assembly to provide a mechanical-to-electrical fail-safe.
- Direct Fit: Designed as a complete Watts 0226060 replacement for Series SAN89, minimizing downtime during emergency service calls.
- Safety Compliance: Meets essential safety requirements for low water cut-off protection on residential and commercial steam boilers.
- Max Pressure Rating: Specifically calibrated for systems up to 15 PSI steam pressure.
Can I use the SAN89D to replace an older Watts 89D assembly?
Yes, the Watts 0226060 is the direct engineering successor to the legacy 89D and DT89A models, updated with one-piece construction for better reliability.
What is the difference between the SAN89D and the SAN89S?
The SAN89D (Dual) includes two switches for burner and pump/alarm control, whereas the SAN89S features a single switch assembly only.
Is this unit suitable for high-pressure boilers?
No, this assembly is rated for a maximum pressure of 15 PSI. For higher pressure requirements up to 50 PSI, the Watts SAN50 series is required.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $777.50
-65%$777.50
$272.12Watts 0226060 Dual Switch
The Watts 0226060 (Model SAN89D) is a heavy-duty Low Water Cut-Off (LWCO) dual switch assembly engineered specifically for steam boiler applications requiring a secondary level of safety. Built for rigorous field demands, this unit provides critical boiler burner protection by automatically interrupting the electrical circuit if the water level drops below safe operating parameters, effectively preventing dry-firing and high-cost heat exchanger damage. This SAN89D dual switch configuration is designed for multi-functionality, allowing for simultaneous burner cut-off and alarm or pump controller activation.
For technicians performing a retrofit or repair, the Watts SAN89D features a robust one-piece construction that streamlines installation and ensures precise alignment of the internal float mechanism. Rated for a maximum working pressure of 15 PSI, it is the standard choice for low-pressure steam systems. This replacement float and switch assembly is a genuine Watts part, ensuring direct compatibility with Series SAN89 housings and maintaining the structural integrity of your hydronic or steam system safety loop.
Key Benefits for the Contractor:- Dual-Function Capability: Features two discrete switches to manage both burner shut-down and auxiliary functions like water feeders or alarms.
- Field-Proven Reliability: The San89D L.W.C.O. switch uses a high-grade float assembly to provide a mechanical-to-electrical fail-safe.
- Direct Fit: Designed as a complete Watts 0226060 replacement for Series SAN89, minimizing downtime during emergency service calls.
- Safety Compliance: Meets essential safety requirements for low water cut-off protection on residential and commercial steam boilers.
- Max Pressure Rating: Specifically calibrated for systems up to 15 PSI steam pressure.
Can I use the SAN89D to replace an older Watts 89D assembly?
Yes, the Watts 0226060 is the direct engineering successor to the legacy 89D and DT89A models, updated with one-piece construction for better reliability.
What is the difference between the SAN89D and the SAN89S?
The SAN89D (Dual) includes two switches for burner and pump/alarm control, whereas the SAN89S features a single switch assembly only.
Is this unit suitable for high-pressure boilers?
No, this assembly is rated for a maximum pressure of 15 PSI. For higher pressure requirements up to 50 PSI, the Watts SAN50 series is required.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Watts 0226060 (Model SAN89D) is a heavy-duty Low Water Cut-Off (LWCO) dual switch assembly engineered specifically for steam boiler applications requiring a secondary level of safety. Built for rigorous field demands, this unit provides critical boiler burner protection by automatically interrupting the electrical circuit if the water level drops below safe operating parameters, effectively preventing dry-firing and high-cost heat exchanger damage. This SAN89D dual switch configuration is designed for multi-functionality, allowing for simultaneous burner cut-off and alarm or pump controller activation.
For technicians performing a retrofit or repair, the Watts SAN89D features a robust one-piece construction that streamlines installation and ensures precise alignment of the internal float mechanism. Rated for a maximum working pressure of 15 PSI, it is the standard choice for low-pressure steam systems. This replacement float and switch assembly is a genuine Watts part, ensuring direct compatibility with Series SAN89 housings and maintaining the structural integrity of your hydronic or steam system safety loop.
Key Benefits for the Contractor:- Dual-Function Capability: Features two discrete switches to manage both burner shut-down and auxiliary functions like water feeders or alarms.
- Field-Proven Reliability: The San89D L.W.C.O. switch uses a high-grade float assembly to provide a mechanical-to-electrical fail-safe.
- Direct Fit: Designed as a complete Watts 0226060 replacement for Series SAN89, minimizing downtime during emergency service calls.
- Safety Compliance: Meets essential safety requirements for low water cut-off protection on residential and commercial steam boilers.
- Max Pressure Rating: Specifically calibrated for systems up to 15 PSI steam pressure.
Can I use the SAN89D to replace an older Watts 89D assembly?
Yes, the Watts 0226060 is the direct engineering successor to the legacy 89D and DT89A models, updated with one-piece construction for better reliability.
What is the difference between the SAN89D and the SAN89S?
The SAN89D (Dual) includes two switches for burner and pump/alarm control, whereas the SAN89S features a single switch assembly only.
Is this unit suitable for high-pressure boilers?
No, this assembly is rated for a maximum pressure of 15 PSI. For higher pressure requirements up to 50 PSI, the Watts SAN50 series is required.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
