Utica-Dunkirk FE3980C090 PTP Ventrui FE
The Utica-Dunkirk FE3980C090 PTP Venturi is a critical combustion component designed for high-efficiency gas-fired condensing boilers. As a genuine OEM part, this venturi (Pressure-Tap Port) ensures a precise air-fuel mixture, directly impacting the modulation and combustion stability of the burner assembly. It is engineered for a seamless fit with Utica and Dunkirk CCB150 and CHB Series (100, 130, 150) units, providing the reliable airflow management required to maintain peak AFUE ratings.
For technicians performing a boiler venturi replacement, the FE3980C090 features integrated pressure test points to simplify combustion analysis and manifold pressure adjustments. Replacing a worn or clogged venturi is essential for preventing "hunting" during modulation and ensuring quiet, efficient flame stabilization. This component is built to withstand the thermal stresses of continuous duty in both residential and light commercial heating applications, maintaining the strict tolerances needed for Utica boiler repair and long-term system integrity.
Key Benefits
- Optimized Combustion: Precision air-fuel mixing reduces fuel waste and prevents soot buildup on the heat exchanger.
- Direct OEM Compatibility: Specifically calibrated for Utica-Dunkirk CCB-150 and CHB-100/130/150 models, ensuring no-guesswork installation.
- Pressure-Tap Port (PTP): Built-in ports allow for accurate diagnostic testing and gas valve adjustments without additional manifold taps.
- Enhanced System Reliability: Durable OEM construction prevents air leaks and maintains stable combustion across the full modulation range.
- Safe Operation: Maintains the manufacturer's specified fuel-to-air ratios for safe and consistent ignition cycles.
Common Questions
Is this venturi compatible with both Natural Gas and Propane units?
Yes, the FE3980C090 is used in both LP and NG configurations. However, ensure you transfer or install the correct gas orifice specifically sized for your fuel type and altitude during installation.
Can I use an aftermarket venturi instead of this OEM part?
Using non-OEM components in a condensing boiler’s combustion string can lead to improper air-fuel ratios, potentially causing heat exchanger damage or unsafe CO levels. This Utica-Dunkirk genuine part is the only way to ensure factory-spec performance.
Do I need to recalibrate the gas valve after installing this part?
Yes. Any time a combustion component like the PTP Venturi is replaced, a full combustion analysis should be performed using a calibrated analyzer to verify CO2/O2 levels and ensure the system is firing within safe parameters.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Utica-Dunkirk FE3980C090 PTP Ventrui FE
The Utica-Dunkirk FE3980C090 PTP Venturi is a critical combustion component designed for high-efficiency gas-fired condensing boilers. As a genuine OEM part, this venturi (Pressure-Tap Port) ensures a precise air-fuel mixture, directly impacting the modulation and combustion stability of the burner assembly. It is engineered for a seamless fit with Utica and Dunkirk CCB150 and CHB Series (100, 130, 150) units, providing the reliable airflow management required to maintain peak AFUE ratings.
For technicians performing a boiler venturi replacement, the FE3980C090 features integrated pressure test points to simplify combustion analysis and manifold pressure adjustments. Replacing a worn or clogged venturi is essential for preventing "hunting" during modulation and ensuring quiet, efficient flame stabilization. This component is built to withstand the thermal stresses of continuous duty in both residential and light commercial heating applications, maintaining the strict tolerances needed for Utica boiler repair and long-term system integrity.
Key Benefits
- Optimized Combustion: Precision air-fuel mixing reduces fuel waste and prevents soot buildup on the heat exchanger.
- Direct OEM Compatibility: Specifically calibrated for Utica-Dunkirk CCB-150 and CHB-100/130/150 models, ensuring no-guesswork installation.
- Pressure-Tap Port (PTP): Built-in ports allow for accurate diagnostic testing and gas valve adjustments without additional manifold taps.
- Enhanced System Reliability: Durable OEM construction prevents air leaks and maintains stable combustion across the full modulation range.
- Safe Operation: Maintains the manufacturer's specified fuel-to-air ratios for safe and consistent ignition cycles.
Common Questions
Is this venturi compatible with both Natural Gas and Propane units?
Yes, the FE3980C090 is used in both LP and NG configurations. However, ensure you transfer or install the correct gas orifice specifically sized for your fuel type and altitude during installation.
Can I use an aftermarket venturi instead of this OEM part?
Using non-OEM components in a condensing boiler’s combustion string can lead to improper air-fuel ratios, potentially causing heat exchanger damage or unsafe CO levels. This Utica-Dunkirk genuine part is the only way to ensure factory-spec performance.
Do I need to recalibrate the gas valve after installing this part?
Yes. Any time a combustion component like the PTP Venturi is replaced, a full combustion analysis should be performed using a calibrated analyzer to verify CO2/O2 levels and ensure the system is firing within safe parameters.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Utica-Dunkirk FE3980C090 PTP Venturi is a critical combustion component designed for high-efficiency gas-fired condensing boilers. As a genuine OEM part, this venturi (Pressure-Tap Port) ensures a precise air-fuel mixture, directly impacting the modulation and combustion stability of the burner assembly. It is engineered for a seamless fit with Utica and Dunkirk CCB150 and CHB Series (100, 130, 150) units, providing the reliable airflow management required to maintain peak AFUE ratings.
For technicians performing a boiler venturi replacement, the FE3980C090 features integrated pressure test points to simplify combustion analysis and manifold pressure adjustments. Replacing a worn or clogged venturi is essential for preventing "hunting" during modulation and ensuring quiet, efficient flame stabilization. This component is built to withstand the thermal stresses of continuous duty in both residential and light commercial heating applications, maintaining the strict tolerances needed for Utica boiler repair and long-term system integrity.
Key Benefits
- Optimized Combustion: Precision air-fuel mixing reduces fuel waste and prevents soot buildup on the heat exchanger.
- Direct OEM Compatibility: Specifically calibrated for Utica-Dunkirk CCB-150 and CHB-100/130/150 models, ensuring no-guesswork installation.
- Pressure-Tap Port (PTP): Built-in ports allow for accurate diagnostic testing and gas valve adjustments without additional manifold taps.
- Enhanced System Reliability: Durable OEM construction prevents air leaks and maintains stable combustion across the full modulation range.
- Safe Operation: Maintains the manufacturer's specified fuel-to-air ratios for safe and consistent ignition cycles.
Common Questions
Is this venturi compatible with both Natural Gas and Propane units?
Yes, the FE3980C090 is used in both LP and NG configurations. However, ensure you transfer or install the correct gas orifice specifically sized for your fuel type and altitude during installation.
Can I use an aftermarket venturi instead of this OEM part?
Using non-OEM components in a condensing boiler’s combustion string can lead to improper air-fuel ratios, potentially causing heat exchanger damage or unsafe CO levels. This Utica-Dunkirk genuine part is the only way to ensure factory-spec performance.
Do I need to recalibrate the gas valve after installing this part?
Yes. Any time a combustion component like the PTP Venturi is replaced, a full combustion analysis should be performed using a calibrated analyzer to verify CO2/O2 levels and ensure the system is firing within safe parameters.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
