Utica-Dunkirk 550001938 Burner Kit
The Utica-Dunkirk 550001938 Burner Kit is a field-proven solution for restoring precise combustion in high-efficiency gas-fired boilers and furnace assemblies. Engineers and field techs know that maintaining the stoichiometric ratio depends on the integrity of the burner surface. This kit allows you to pull and replace a degraded OEM burner assembly during a standard service call, preventing the soot accumulation and delayed ignition issues often found in neglected units. It is specifically engineered for compatibility with Utica MGB and Dunkirk gas boilers, ensuring the flame pattern aligns perfectly with the heat exchanger geometry for maximum AFUE performance.
Constructed from high-grade, heat-resistant metal alloys, this replacement burner kit includes the essential gaskets and mounting hardware required to seal the combustion chamber. Replacing the entire assembly rather than attempting to clean a warped or cracked burner is the professional standard for preventing carbon monoxide leaks and ensuring reliable HVAC system maintenance. This kit is a direct-fit component, designed to meet the flow requirements of the original manifold and orifice settings.
Key Benefits for Technicians:- Durable Combustion Surface: Heavy-duty alloy construction resists thermal stress and warping under high-fire conditions.
- Complete Installation Kit: Includes the burner head, sealing gaskets, and screws to ensure a pressurized, airtight fit.
- Optimized Heat Transfer: Restores the original flame profile for peak energy efficiency and reduced fuel waste.
- Precise OEM Compatibility: Engineered specifically for Utica-Dunkirk boiler parts, eliminating the need for field modifications.
- Operational Reliability: Minimizes burner vibration and noise, leading to quieter cycles and fewer emergency call-backs.
Is the igniter included in this specific kit?
While this burner replacement kit includes the main burner and critical gaskets, technicians should always verify the state of the existing igniter and flame sensor. If the burner shows signs of heavy oxidation, it is often best practice to replace the pilot or hot surface igniter simultaneously.
How do I confirm this fits my specific boiler?
Always cross-reference the model and serial number on the data plate. This kit (MPN: 550001938) is the standard replacement for select MGB series 2 and UB90 configurations. If the manifold pressure or gas type (Natural vs LP) has been modified, additional adjustments may be necessary.
Why replace the entire kit instead of just the gaskets?
Micro-cracks in the burner plate can lead to uneven heating and premature heat exchanger failure. Replacing the entire assembly ensures the burner ports are clear and the internal baffle is structurally sound.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $568.81
-65%$568.81
$199.08Utica-Dunkirk 550001938 Burner Kit
The Utica-Dunkirk 550001938 Burner Kit is a field-proven solution for restoring precise combustion in high-efficiency gas-fired boilers and furnace assemblies. Engineers and field techs know that maintaining the stoichiometric ratio depends on the integrity of the burner surface. This kit allows you to pull and replace a degraded OEM burner assembly during a standard service call, preventing the soot accumulation and delayed ignition issues often found in neglected units. It is specifically engineered for compatibility with Utica MGB and Dunkirk gas boilers, ensuring the flame pattern aligns perfectly with the heat exchanger geometry for maximum AFUE performance.
Constructed from high-grade, heat-resistant metal alloys, this replacement burner kit includes the essential gaskets and mounting hardware required to seal the combustion chamber. Replacing the entire assembly rather than attempting to clean a warped or cracked burner is the professional standard for preventing carbon monoxide leaks and ensuring reliable HVAC system maintenance. This kit is a direct-fit component, designed to meet the flow requirements of the original manifold and orifice settings.
Key Benefits for Technicians:- Durable Combustion Surface: Heavy-duty alloy construction resists thermal stress and warping under high-fire conditions.
- Complete Installation Kit: Includes the burner head, sealing gaskets, and screws to ensure a pressurized, airtight fit.
- Optimized Heat Transfer: Restores the original flame profile for peak energy efficiency and reduced fuel waste.
- Precise OEM Compatibility: Engineered specifically for Utica-Dunkirk boiler parts, eliminating the need for field modifications.
- Operational Reliability: Minimizes burner vibration and noise, leading to quieter cycles and fewer emergency call-backs.
Is the igniter included in this specific kit?
While this burner replacement kit includes the main burner and critical gaskets, technicians should always verify the state of the existing igniter and flame sensor. If the burner shows signs of heavy oxidation, it is often best practice to replace the pilot or hot surface igniter simultaneously.
How do I confirm this fits my specific boiler?
Always cross-reference the model and serial number on the data plate. This kit (MPN: 550001938) is the standard replacement for select MGB series 2 and UB90 configurations. If the manifold pressure or gas type (Natural vs LP) has been modified, additional adjustments may be necessary.
Why replace the entire kit instead of just the gaskets?
Micro-cracks in the burner plate can lead to uneven heating and premature heat exchanger failure. Replacing the entire assembly ensures the burner ports are clear and the internal baffle is structurally sound.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Utica-Dunkirk 550001938 Burner Kit is a field-proven solution for restoring precise combustion in high-efficiency gas-fired boilers and furnace assemblies. Engineers and field techs know that maintaining the stoichiometric ratio depends on the integrity of the burner surface. This kit allows you to pull and replace a degraded OEM burner assembly during a standard service call, preventing the soot accumulation and delayed ignition issues often found in neglected units. It is specifically engineered for compatibility with Utica MGB and Dunkirk gas boilers, ensuring the flame pattern aligns perfectly with the heat exchanger geometry for maximum AFUE performance.
Constructed from high-grade, heat-resistant metal alloys, this replacement burner kit includes the essential gaskets and mounting hardware required to seal the combustion chamber. Replacing the entire assembly rather than attempting to clean a warped or cracked burner is the professional standard for preventing carbon monoxide leaks and ensuring reliable HVAC system maintenance. This kit is a direct-fit component, designed to meet the flow requirements of the original manifold and orifice settings.
Key Benefits for Technicians:- Durable Combustion Surface: Heavy-duty alloy construction resists thermal stress and warping under high-fire conditions.
- Complete Installation Kit: Includes the burner head, sealing gaskets, and screws to ensure a pressurized, airtight fit.
- Optimized Heat Transfer: Restores the original flame profile for peak energy efficiency and reduced fuel waste.
- Precise OEM Compatibility: Engineered specifically for Utica-Dunkirk boiler parts, eliminating the need for field modifications.
- Operational Reliability: Minimizes burner vibration and noise, leading to quieter cycles and fewer emergency call-backs.
Is the igniter included in this specific kit?
While this burner replacement kit includes the main burner and critical gaskets, technicians should always verify the state of the existing igniter and flame sensor. If the burner shows signs of heavy oxidation, it is often best practice to replace the pilot or hot surface igniter simultaneously.
How do I confirm this fits my specific boiler?
Always cross-reference the model and serial number on the data plate. This kit (MPN: 550001938) is the standard replacement for select MGB series 2 and UB90 configurations. If the manifold pressure or gas type (Natural vs LP) has been modified, additional adjustments may be necessary.
Why replace the entire kit instead of just the gaskets?
Micro-cracks in the burner plate can lead to uneven heating and premature heat exchanger failure. Replacing the entire assembly ensures the burner ports are clear and the internal baffle is structurally sound.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
