Utica-Dunkirk 42500935 Rollout Shield
The Utica-Dunkirk 42500935 Rollout Shield is a critical combustion chamber component designed for precision fitment in gas-fired boiler systems. As a veteran-grade OEM replacement part, this shield serves as the primary thermal barrier between the burner assembly and sensitive external controls. It is engineered to withstand high-temperature environments, specifically for use in Utica and Dunkirk boiler models such as the WPSB-5D, WPSB-5DP, XEB-5LP, and XEB-5NG. Proper installation of this shield is essential for maintaining a stable flame path and preventing flame rollout, which can lead to system shutdowns or damage to the flame rollout switch and wiring harness.
Constructed from heavy-duty, heat-resistant materials, the 42500935 rollout shield ensures that combustion products are properly directed through the heat exchanger. In the field, a missing or warped shield is often the root cause of frequent furnace troubleshooting calls involving tripped safety limits. This part is a direct-fit solution, allowing contractors to restore system integrity and meet manufacturer safety specifications during HVAC maintenance or emergency repairs. For reliable boiler repair, always verify your specific model and section count to ensure correct horizontal and vertical clearance within the burner vestibule.
Key Benefits- Direct OEM Compatibility: Specifically engineered for Utica Dunkirk heating systems, including the WPSB and XEB series.
- Enhanced Thermal Protection: Acts as a robust partition to protect external components from high-intensity radiant heat.
- Optimized Combustion Safety: Helps prevent the dangerous escape of flames and exhaust gases from the burner box.
- Durable Field Performance: Built with high-grade metal to resist warping and corrosion over long-term operation.
- Seamless Installation: Designed for exact mounting alignment on standard gas burner manifolds.
What causes a flame rollout in Utica-Dunkirk boilers?
Flame rollout typically occurs due to restricted airflow, such as a blocked flue, soot-clogged heat exchanger, or cracked heat exchanger surfaces. This creates backpressure that forces flames out of the front of the combustion chamber.
How do I know if I need to replace my rollout shield?
You should replace the shield if you notice visible scorching, heavy rust scaling, or physical warping. A compromised shield cannot effectively block heat, which may cause your 300F rollout switch to trip repeatedly.
Can I use this shield in a condensing boiler?
No, the 42500935 is designed for specific atmospheric and power-vented gas boilers. Always cross-reference the part number with the manufacturer’s technical data sheet for your specific model before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $10.62
-65%$10.62
$3.72Utica-Dunkirk 42500935 Rollout Shield
The Utica-Dunkirk 42500935 Rollout Shield is a critical combustion chamber component designed for precision fitment in gas-fired boiler systems. As a veteran-grade OEM replacement part, this shield serves as the primary thermal barrier between the burner assembly and sensitive external controls. It is engineered to withstand high-temperature environments, specifically for use in Utica and Dunkirk boiler models such as the WPSB-5D, WPSB-5DP, XEB-5LP, and XEB-5NG. Proper installation of this shield is essential for maintaining a stable flame path and preventing flame rollout, which can lead to system shutdowns or damage to the flame rollout switch and wiring harness.
Constructed from heavy-duty, heat-resistant materials, the 42500935 rollout shield ensures that combustion products are properly directed through the heat exchanger. In the field, a missing or warped shield is often the root cause of frequent furnace troubleshooting calls involving tripped safety limits. This part is a direct-fit solution, allowing contractors to restore system integrity and meet manufacturer safety specifications during HVAC maintenance or emergency repairs. For reliable boiler repair, always verify your specific model and section count to ensure correct horizontal and vertical clearance within the burner vestibule.
Key Benefits- Direct OEM Compatibility: Specifically engineered for Utica Dunkirk heating systems, including the WPSB and XEB series.
- Enhanced Thermal Protection: Acts as a robust partition to protect external components from high-intensity radiant heat.
- Optimized Combustion Safety: Helps prevent the dangerous escape of flames and exhaust gases from the burner box.
- Durable Field Performance: Built with high-grade metal to resist warping and corrosion over long-term operation.
- Seamless Installation: Designed for exact mounting alignment on standard gas burner manifolds.
What causes a flame rollout in Utica-Dunkirk boilers?
Flame rollout typically occurs due to restricted airflow, such as a blocked flue, soot-clogged heat exchanger, or cracked heat exchanger surfaces. This creates backpressure that forces flames out of the front of the combustion chamber.
How do I know if I need to replace my rollout shield?
You should replace the shield if you notice visible scorching, heavy rust scaling, or physical warping. A compromised shield cannot effectively block heat, which may cause your 300F rollout switch to trip repeatedly.
Can I use this shield in a condensing boiler?
No, the 42500935 is designed for specific atmospheric and power-vented gas boilers. Always cross-reference the part number with the manufacturer’s technical data sheet for your specific model before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Utica-Dunkirk 42500935 Rollout Shield is a critical combustion chamber component designed for precision fitment in gas-fired boiler systems. As a veteran-grade OEM replacement part, this shield serves as the primary thermal barrier between the burner assembly and sensitive external controls. It is engineered to withstand high-temperature environments, specifically for use in Utica and Dunkirk boiler models such as the WPSB-5D, WPSB-5DP, XEB-5LP, and XEB-5NG. Proper installation of this shield is essential for maintaining a stable flame path and preventing flame rollout, which can lead to system shutdowns or damage to the flame rollout switch and wiring harness.
Constructed from heavy-duty, heat-resistant materials, the 42500935 rollout shield ensures that combustion products are properly directed through the heat exchanger. In the field, a missing or warped shield is often the root cause of frequent furnace troubleshooting calls involving tripped safety limits. This part is a direct-fit solution, allowing contractors to restore system integrity and meet manufacturer safety specifications during HVAC maintenance or emergency repairs. For reliable boiler repair, always verify your specific model and section count to ensure correct horizontal and vertical clearance within the burner vestibule.
Key Benefits- Direct OEM Compatibility: Specifically engineered for Utica Dunkirk heating systems, including the WPSB and XEB series.
- Enhanced Thermal Protection: Acts as a robust partition to protect external components from high-intensity radiant heat.
- Optimized Combustion Safety: Helps prevent the dangerous escape of flames and exhaust gases from the burner box.
- Durable Field Performance: Built with high-grade metal to resist warping and corrosion over long-term operation.
- Seamless Installation: Designed for exact mounting alignment on standard gas burner manifolds.
What causes a flame rollout in Utica-Dunkirk boilers?
Flame rollout typically occurs due to restricted airflow, such as a blocked flue, soot-clogged heat exchanger, or cracked heat exchanger surfaces. This creates backpressure that forces flames out of the front of the combustion chamber.
How do I know if I need to replace my rollout shield?
You should replace the shield if you notice visible scorching, heavy rust scaling, or physical warping. A compromised shield cannot effectively block heat, which may cause your 300F rollout switch to trip repeatedly.
Can I use this shield in a condensing boiler?
No, the 42500935 is designed for specific atmospheric and power-vented gas boilers. Always cross-reference the part number with the manufacturer’s technical data sheet for your specific model before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
