Utica-Dunkirk 240004709 Sensor
The Utica-Dunkirk 240004709 Condensate Pump Alarm Sensor is a critical OEM safety component engineered for high-efficiency condensing boilers and HVAC systems. As a veteran technician knows, managing HVAC condensate overflow is non-negotiable to prevent property damage and equipment lockout. This replacement alarm sensor integrates directly with the condensate pump safety switch circuit, providing real-time monitoring of fluid levels within the reservoir. When discharge lines become obstructed or the pump motor fails, this sensor triggers an immediate alert or system shutdown, acting as the primary defense against internal flooding and secondary heat exchanger corrosion.
Constructed by ECR International to exacting tolerances, the 240004709 sensor is designed for rapid response and compatibility with Utica and Dunkirk hydronic systems. Its low-profile design ensures a precise fit within standard discharge lines and pump housings, facilitating a streamlined furnace condensate sensor installation. By maintaining a reliable condensate pump alarm, contractors ensure that high-efficiency equipment stays operational while protecting the surrounding building envelope from untreated acidic condensate discharge.
Key Benefits- OEM Compatibility: Precision-engineered for Utica-Dunkirk high-efficiency boilers, ensuring 100% signal accuracy with the central control module.
- Proactive Overflow Prevention: Detects high water levels in the condensate pump reservoir before liquid can back up into the appliance or onto the floor.
- Durable Construction: Built to withstand the acidic nature of boiler condensate, reducing the risk of sensor corrosion or false triggering.
- Simplified Service: Direct-fit wiring leads allow for fast field replacement, minimizing diagnostic time during emergency service calls.
How do I know if the Utica-Dunkirk 240004709 sensor is faulty?
If your boiler is cycling on a safety lockout or the condensate pump is overflowing without triggering an alarm, the sensor may be fouled or shorted. Technicians should check for continuity and inspect the probe for mineral buildup or scale.
Will this sensor work with third-party condensate pumps?
While designed for ECR International brands, this condensate alarm sensor is intended for use within specific system controls. Always verify the voltage requirements and terminal connections against the Utica-Dunkirk wiring diagram before integration.
What causes a condensate sensor to fail prematurely?
The most common causes are excessive particulate in the exhaust tee or a clogged condensate trap assembly. Periodic cleaning of the drain lines is recommended to prevent debris from interfering with the sensor’s electrical conductivity.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $28.04
-65%$28.04
$9.81Utica-Dunkirk 240004709 Sensor
The Utica-Dunkirk 240004709 Condensate Pump Alarm Sensor is a critical OEM safety component engineered for high-efficiency condensing boilers and HVAC systems. As a veteran technician knows, managing HVAC condensate overflow is non-negotiable to prevent property damage and equipment lockout. This replacement alarm sensor integrates directly with the condensate pump safety switch circuit, providing real-time monitoring of fluid levels within the reservoir. When discharge lines become obstructed or the pump motor fails, this sensor triggers an immediate alert or system shutdown, acting as the primary defense against internal flooding and secondary heat exchanger corrosion.
Constructed by ECR International to exacting tolerances, the 240004709 sensor is designed for rapid response and compatibility with Utica and Dunkirk hydronic systems. Its low-profile design ensures a precise fit within standard discharge lines and pump housings, facilitating a streamlined furnace condensate sensor installation. By maintaining a reliable condensate pump alarm, contractors ensure that high-efficiency equipment stays operational while protecting the surrounding building envelope from untreated acidic condensate discharge.
Key Benefits- OEM Compatibility: Precision-engineered for Utica-Dunkirk high-efficiency boilers, ensuring 100% signal accuracy with the central control module.
- Proactive Overflow Prevention: Detects high water levels in the condensate pump reservoir before liquid can back up into the appliance or onto the floor.
- Durable Construction: Built to withstand the acidic nature of boiler condensate, reducing the risk of sensor corrosion or false triggering.
- Simplified Service: Direct-fit wiring leads allow for fast field replacement, minimizing diagnostic time during emergency service calls.
How do I know if the Utica-Dunkirk 240004709 sensor is faulty?
If your boiler is cycling on a safety lockout or the condensate pump is overflowing without triggering an alarm, the sensor may be fouled or shorted. Technicians should check for continuity and inspect the probe for mineral buildup or scale.
Will this sensor work with third-party condensate pumps?
While designed for ECR International brands, this condensate alarm sensor is intended for use within specific system controls. Always verify the voltage requirements and terminal connections against the Utica-Dunkirk wiring diagram before integration.
What causes a condensate sensor to fail prematurely?
The most common causes are excessive particulate in the exhaust tee or a clogged condensate trap assembly. Periodic cleaning of the drain lines is recommended to prevent debris from interfering with the sensor’s electrical conductivity.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Utica-Dunkirk 240004709 Condensate Pump Alarm Sensor is a critical OEM safety component engineered for high-efficiency condensing boilers and HVAC systems. As a veteran technician knows, managing HVAC condensate overflow is non-negotiable to prevent property damage and equipment lockout. This replacement alarm sensor integrates directly with the condensate pump safety switch circuit, providing real-time monitoring of fluid levels within the reservoir. When discharge lines become obstructed or the pump motor fails, this sensor triggers an immediate alert or system shutdown, acting as the primary defense against internal flooding and secondary heat exchanger corrosion.
Constructed by ECR International to exacting tolerances, the 240004709 sensor is designed for rapid response and compatibility with Utica and Dunkirk hydronic systems. Its low-profile design ensures a precise fit within standard discharge lines and pump housings, facilitating a streamlined furnace condensate sensor installation. By maintaining a reliable condensate pump alarm, contractors ensure that high-efficiency equipment stays operational while protecting the surrounding building envelope from untreated acidic condensate discharge.
Key Benefits- OEM Compatibility: Precision-engineered for Utica-Dunkirk high-efficiency boilers, ensuring 100% signal accuracy with the central control module.
- Proactive Overflow Prevention: Detects high water levels in the condensate pump reservoir before liquid can back up into the appliance or onto the floor.
- Durable Construction: Built to withstand the acidic nature of boiler condensate, reducing the risk of sensor corrosion or false triggering.
- Simplified Service: Direct-fit wiring leads allow for fast field replacement, minimizing diagnostic time during emergency service calls.
How do I know if the Utica-Dunkirk 240004709 sensor is faulty?
If your boiler is cycling on a safety lockout or the condensate pump is overflowing without triggering an alarm, the sensor may be fouled or shorted. Technicians should check for continuity and inspect the probe for mineral buildup or scale.
Will this sensor work with third-party condensate pumps?
While designed for ECR International brands, this condensate alarm sensor is intended for use within specific system controls. Always verify the voltage requirements and terminal connections against the Utica-Dunkirk wiring diagram before integration.
What causes a condensate sensor to fail prematurely?
The most common causes are excessive particulate in the exhaust tee or a clogged condensate trap assembly. Periodic cleaning of the drain lines is recommended to prevent debris from interfering with the sensor’s electrical conductivity.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
