Trane VAL9031 Valve
The Trane VAL9031 is an OEM-grade two-stage gas valve engineered for precision combustion control in high-efficiency residential and commercial heating systems. Operating on a 24V low-voltage control circuit, this valve is the designated direct replacement for the Trane VAL6376 found in the XL90 and XCV90 furnace series. The dual-stage configuration allows for modulated gas flow, specifically calibrated at 3.2" WC for natural gas applications, ensuring the burner assembly operates at peak thermal efficiency based on real-time heating demand. With a standard 1/2 inch NPT connection, the VAL09031 (alternate part number) provides a drop-in solution for HVAC contractors requiring consistent manifold pressure and fast-opening operation. This "J" Series valve, often cross-referenced with White Rodgers 36J specifications, is critical for maintaining the safety internal logic of the furnace control board. While pre-set for NAT gas, the unit is compatible with LP conversion kits where high-altitude or propane configurations are required for Trane and American Standard furnace repair.
Key Benefits for Technicians- OEM Precision: Genuine VAL9031 replacement ensures seamless communication with the integrated furnace control and ignitor.
- Dual-Stage Efficiency: Supports incremental heat output, reducing short-cycling and improving temperature stability across the heat exchanger.
- Hardware Compatibility: Standard 1/2" inlet/outlet sizing fits a broad range of XL90 furnace parts without piping modifications.
- Optimized Delivery: Factory-calibrated to 3.2" water column to match Trane's specific manifold requirements for natural gas.
Is the VAL9031 compatible with American Standard furnaces?
Yes, as an OEM component, this valve serves as the Trane VAL9031 replacement for both Trane and American Standard 2-stage models, including those requiring the VAL09031 part number.
Can I use this valve for an LP conversion?
While factory-configured for 3.2"WC NAT gas, this valve can be converted using a Natural Gas/LP Kit for 2-Stage (typically F92-1008 or equivalent) to accommodate propane systems.
What was the previous part number for this valve?
This unit is the primary upgrade for the legacy VAL6376 gas valve. If your furnace utilizes a single-stage system, verify the specific pressure and voltage requirements before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $144.38
-65%$144.38
$50.53Trane VAL9031 Valve
The Trane VAL9031 is an OEM-grade two-stage gas valve engineered for precision combustion control in high-efficiency residential and commercial heating systems. Operating on a 24V low-voltage control circuit, this valve is the designated direct replacement for the Trane VAL6376 found in the XL90 and XCV90 furnace series. The dual-stage configuration allows for modulated gas flow, specifically calibrated at 3.2" WC for natural gas applications, ensuring the burner assembly operates at peak thermal efficiency based on real-time heating demand. With a standard 1/2 inch NPT connection, the VAL09031 (alternate part number) provides a drop-in solution for HVAC contractors requiring consistent manifold pressure and fast-opening operation. This "J" Series valve, often cross-referenced with White Rodgers 36J specifications, is critical for maintaining the safety internal logic of the furnace control board. While pre-set for NAT gas, the unit is compatible with LP conversion kits where high-altitude or propane configurations are required for Trane and American Standard furnace repair.
Key Benefits for Technicians- OEM Precision: Genuine VAL9031 replacement ensures seamless communication with the integrated furnace control and ignitor.
- Dual-Stage Efficiency: Supports incremental heat output, reducing short-cycling and improving temperature stability across the heat exchanger.
- Hardware Compatibility: Standard 1/2" inlet/outlet sizing fits a broad range of XL90 furnace parts without piping modifications.
- Optimized Delivery: Factory-calibrated to 3.2" water column to match Trane's specific manifold requirements for natural gas.
Is the VAL9031 compatible with American Standard furnaces?
Yes, as an OEM component, this valve serves as the Trane VAL9031 replacement for both Trane and American Standard 2-stage models, including those requiring the VAL09031 part number.
Can I use this valve for an LP conversion?
While factory-configured for 3.2"WC NAT gas, this valve can be converted using a Natural Gas/LP Kit for 2-Stage (typically F92-1008 or equivalent) to accommodate propane systems.
What was the previous part number for this valve?
This unit is the primary upgrade for the legacy VAL6376 gas valve. If your furnace utilizes a single-stage system, verify the specific pressure and voltage requirements before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane VAL9031 is an OEM-grade two-stage gas valve engineered for precision combustion control in high-efficiency residential and commercial heating systems. Operating on a 24V low-voltage control circuit, this valve is the designated direct replacement for the Trane VAL6376 found in the XL90 and XCV90 furnace series. The dual-stage configuration allows for modulated gas flow, specifically calibrated at 3.2" WC for natural gas applications, ensuring the burner assembly operates at peak thermal efficiency based on real-time heating demand. With a standard 1/2 inch NPT connection, the VAL09031 (alternate part number) provides a drop-in solution for HVAC contractors requiring consistent manifold pressure and fast-opening operation. This "J" Series valve, often cross-referenced with White Rodgers 36J specifications, is critical for maintaining the safety internal logic of the furnace control board. While pre-set for NAT gas, the unit is compatible with LP conversion kits where high-altitude or propane configurations are required for Trane and American Standard furnace repair.
Key Benefits for Technicians- OEM Precision: Genuine VAL9031 replacement ensures seamless communication with the integrated furnace control and ignitor.
- Dual-Stage Efficiency: Supports incremental heat output, reducing short-cycling and improving temperature stability across the heat exchanger.
- Hardware Compatibility: Standard 1/2" inlet/outlet sizing fits a broad range of XL90 furnace parts without piping modifications.
- Optimized Delivery: Factory-calibrated to 3.2" water column to match Trane's specific manifold requirements for natural gas.
Is the VAL9031 compatible with American Standard furnaces?
Yes, as an OEM component, this valve serves as the Trane VAL9031 replacement for both Trane and American Standard 2-stage models, including those requiring the VAL09031 part number.
Can I use this valve for an LP conversion?
While factory-configured for 3.2"WC NAT gas, this valve can be converted using a Natural Gas/LP Kit for 2-Stage (typically F92-1008 or equivalent) to accommodate propane systems.
What was the previous part number for this valve?
This unit is the primary upgrade for the legacy VAL6376 gas valve. If your furnace utilizes a single-stage system, verify the specific pressure and voltage requirements before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
