Trane SWT2326 Float Swtch
The Trane SWT2326 Float Switch is a critical SPST N/C (Normally Closed) safety component designed for precise low-level liquid detection within condensate drain pans and hydronic systems. Built with a brass body and stainless steel float, this genuine OEM replacement ensures high corrosion resistance in demanding HVAC environments. Its Normally Closed configuration completes the circuit during standard operation and opens when liquid levels drop or fail to meet the trip point, signaling the HVAC control board to shut down the system. This action prevents equipment damage, such as pump burnout due to dry running, or potential property damage from overflows.
This IP67-rated switch is engineered to meet Trane factory specifications, offering a rugged 3.5-inch length for compact installation in secondary drain lines or auxiliary reservoirs. Compatible with 24V control circuits used in American Standard and Trane air handlers and packaged rooftop units, the SWT2326 provides dependable water level monitoring. For contractors, OEM Status ensures the part maintains system efficiency and original equipment standards without the troubleshooting headaches of universal alternatives. Proper installation follows building code best practices for overflow protection, ensuring your HVAC condensate management remains reliable through high-demand cooling seasons.
Key Benefits:
- Precision Low-Level Detection: Triggers safety protocols at exact liquid trip points to protect HVAC pumps and hydronic equipment.
- Superior Construction: Features a durable stainless steel float and brass body for maximum service life in wet environments.
- OEM Compatibility: Guaranteed fit for Trane and American Standard systems, maintaining UL listing and factory safety logic.
- Environmental Protection: The IP67 rating ensures the internal magnetic reed switch remains dustproof and waterproof.
- Simplified Troubleshooting: SPST N/C logic makes it easy to test continuity during routine HVAC maintenance calls.
Common Questions:
What does it mean that this switch is 'Normally Closed' (N/C)?
In its standard state with adequate water levels, the SWT2326 completes the electrical circuit. If the float drops below the set point, the circuit opens, which commonly breaks the 24V R-wire connection to safely shutdown the compressor and blower motor.
Can I use the SWT2326 on secondary drain pans?
Yes, this switch is designed for liquid level monitoring in both primary and secondary pans. Its compact size and brass/stainless steel build are ideal for HVAC condensate drain lines where reliable overflow protection is required.
How do I test if the Trane SWT2326 is functioning properly?
A technician can check for continuity across the leads using a multimeter set to Ohms. With the float in the "regular" position, you should see a closed circuit (zero resistance); moving the float to the trip position should show an open circuit (Infinite/OL).
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $170.20
-65%$170.20
$59.57Trane SWT2326 Float Swtch
The Trane SWT2326 Float Switch is a critical SPST N/C (Normally Closed) safety component designed for precise low-level liquid detection within condensate drain pans and hydronic systems. Built with a brass body and stainless steel float, this genuine OEM replacement ensures high corrosion resistance in demanding HVAC environments. Its Normally Closed configuration completes the circuit during standard operation and opens when liquid levels drop or fail to meet the trip point, signaling the HVAC control board to shut down the system. This action prevents equipment damage, such as pump burnout due to dry running, or potential property damage from overflows.
This IP67-rated switch is engineered to meet Trane factory specifications, offering a rugged 3.5-inch length for compact installation in secondary drain lines or auxiliary reservoirs. Compatible with 24V control circuits used in American Standard and Trane air handlers and packaged rooftop units, the SWT2326 provides dependable water level monitoring. For contractors, OEM Status ensures the part maintains system efficiency and original equipment standards without the troubleshooting headaches of universal alternatives. Proper installation follows building code best practices for overflow protection, ensuring your HVAC condensate management remains reliable through high-demand cooling seasons.
Key Benefits:
- Precision Low-Level Detection: Triggers safety protocols at exact liquid trip points to protect HVAC pumps and hydronic equipment.
- Superior Construction: Features a durable stainless steel float and brass body for maximum service life in wet environments.
- OEM Compatibility: Guaranteed fit for Trane and American Standard systems, maintaining UL listing and factory safety logic.
- Environmental Protection: The IP67 rating ensures the internal magnetic reed switch remains dustproof and waterproof.
- Simplified Troubleshooting: SPST N/C logic makes it easy to test continuity during routine HVAC maintenance calls.
Common Questions:
What does it mean that this switch is 'Normally Closed' (N/C)?
In its standard state with adequate water levels, the SWT2326 completes the electrical circuit. If the float drops below the set point, the circuit opens, which commonly breaks the 24V R-wire connection to safely shutdown the compressor and blower motor.
Can I use the SWT2326 on secondary drain pans?
Yes, this switch is designed for liquid level monitoring in both primary and secondary pans. Its compact size and brass/stainless steel build are ideal for HVAC condensate drain lines where reliable overflow protection is required.
How do I test if the Trane SWT2326 is functioning properly?
A technician can check for continuity across the leads using a multimeter set to Ohms. With the float in the "regular" position, you should see a closed circuit (zero resistance); moving the float to the trip position should show an open circuit (Infinite/OL).
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane SWT2326 Float Switch is a critical SPST N/C (Normally Closed) safety component designed for precise low-level liquid detection within condensate drain pans and hydronic systems. Built with a brass body and stainless steel float, this genuine OEM replacement ensures high corrosion resistance in demanding HVAC environments. Its Normally Closed configuration completes the circuit during standard operation and opens when liquid levels drop or fail to meet the trip point, signaling the HVAC control board to shut down the system. This action prevents equipment damage, such as pump burnout due to dry running, or potential property damage from overflows.
This IP67-rated switch is engineered to meet Trane factory specifications, offering a rugged 3.5-inch length for compact installation in secondary drain lines or auxiliary reservoirs. Compatible with 24V control circuits used in American Standard and Trane air handlers and packaged rooftop units, the SWT2326 provides dependable water level monitoring. For contractors, OEM Status ensures the part maintains system efficiency and original equipment standards without the troubleshooting headaches of universal alternatives. Proper installation follows building code best practices for overflow protection, ensuring your HVAC condensate management remains reliable through high-demand cooling seasons.
Key Benefits:
- Precision Low-Level Detection: Triggers safety protocols at exact liquid trip points to protect HVAC pumps and hydronic equipment.
- Superior Construction: Features a durable stainless steel float and brass body for maximum service life in wet environments.
- OEM Compatibility: Guaranteed fit for Trane and American Standard systems, maintaining UL listing and factory safety logic.
- Environmental Protection: The IP67 rating ensures the internal magnetic reed switch remains dustproof and waterproof.
- Simplified Troubleshooting: SPST N/C logic makes it easy to test continuity during routine HVAC maintenance calls.
Common Questions:
What does it mean that this switch is 'Normally Closed' (N/C)?
In its standard state with adequate water levels, the SWT2326 completes the electrical circuit. If the float drops below the set point, the circuit opens, which commonly breaks the 24V R-wire connection to safely shutdown the compressor and blower motor.
Can I use the SWT2326 on secondary drain pans?
Yes, this switch is designed for liquid level monitoring in both primary and secondary pans. Its compact size and brass/stainless steel build are ideal for HVAC condensate drain lines where reliable overflow protection is required.
How do I test if the Trane SWT2326 is functioning properly?
A technician can check for continuity across the leads using a multimeter set to Ohms. With the float in the "regular" position, you should see a closed circuit (zero resistance); moving the float to the trip position should show an open circuit (Infinite/OL).
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
