Trane SEN2892 Temperature Sensor
The Trane SEN2892 is a critical 10k ohm NTC thermistor designed for precise suction line temperature monitoring in commercial HVAC and refrigeration systems. Engineered specifically for EEV superheat control, this sensor provides the high-accuracy resistance feedback necessary for electronic expansion valve modulation. By tracking the evaporator outlet temperature, it enables real-time refrigerant management to prevent liquid slugging and ensure optimal compressor protection in equipment ranging from 20 to 60 tons.
Housed in a rugged stainless steel casing with a 1/4" NPT male connection, the SEN2892 is built to withstand the demanding conditions of suction lines on chillers, rooftop units, and split systems. It serves as a direct Trane OEM replacement for the SEN02892, maintaining a resistance of 10,000 ohms at 25°C (77°F). For technicians, this sensor is the standard for troubleshooting suction temperature sensor failure diagnostics on Intellipak and CGAM platforms, where consistent HVAC temperature sensing is required to optimize evaporator performance and long-term system balance.
Key Benefits:- Accurate Superheat Regulation: Provides the critical temperature data needed for precise EEV modulation and refrigerant flow optimization.
- Industrial Durability: Features a moisture-resistant stainless steel housing with a standard 1/4" NPT fitting for reliable suction line mounting.
- OEM Compatibility: Designed for seamless integration with Trane building automation platforms and control architectures.
- Compressor Protection: Facilitates rapid response to temperature fluctuations to prevent hazardous liquid carryover into the compressor.
- Stable Thermal Feedback: Delivers consistent 10k ohm resistance-based data for long-term reliability in commercial environments.
- Where is the SEN2892 typically installed? This sensor should be mounted directly on the suction line, near the evaporator outlet, to provide accurate superheat calculations.
- What is the resistance specification for this sensor? It is a 10k ohm thermistor at 77°F (25°C), utilized by the controller to determine the saturated suction temperature.
- Which systems utilize the SEN2892? It is primarily found in Trane commercial systems, including Intellipak, CGAM chillers, and large-tonnage rooftop units equipped with electronic expansion valves.
- How does this sensor impact system efficiency? By providing accurate suction temperature data, it allows the EEV to maintain the lowest possible stable superheat, maximizing coil surface utilization.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Trane SEN2892 Temperature Sensor
The Trane SEN2892 is a critical 10k ohm NTC thermistor designed for precise suction line temperature monitoring in commercial HVAC and refrigeration systems. Engineered specifically for EEV superheat control, this sensor provides the high-accuracy resistance feedback necessary for electronic expansion valve modulation. By tracking the evaporator outlet temperature, it enables real-time refrigerant management to prevent liquid slugging and ensure optimal compressor protection in equipment ranging from 20 to 60 tons.
Housed in a rugged stainless steel casing with a 1/4" NPT male connection, the SEN2892 is built to withstand the demanding conditions of suction lines on chillers, rooftop units, and split systems. It serves as a direct Trane OEM replacement for the SEN02892, maintaining a resistance of 10,000 ohms at 25°C (77°F). For technicians, this sensor is the standard for troubleshooting suction temperature sensor failure diagnostics on Intellipak and CGAM platforms, where consistent HVAC temperature sensing is required to optimize evaporator performance and long-term system balance.
Key Benefits:- Accurate Superheat Regulation: Provides the critical temperature data needed for precise EEV modulation and refrigerant flow optimization.
- Industrial Durability: Features a moisture-resistant stainless steel housing with a standard 1/4" NPT fitting for reliable suction line mounting.
- OEM Compatibility: Designed for seamless integration with Trane building automation platforms and control architectures.
- Compressor Protection: Facilitates rapid response to temperature fluctuations to prevent hazardous liquid carryover into the compressor.
- Stable Thermal Feedback: Delivers consistent 10k ohm resistance-based data for long-term reliability in commercial environments.
- Where is the SEN2892 typically installed? This sensor should be mounted directly on the suction line, near the evaporator outlet, to provide accurate superheat calculations.
- What is the resistance specification for this sensor? It is a 10k ohm thermistor at 77°F (25°C), utilized by the controller to determine the saturated suction temperature.
- Which systems utilize the SEN2892? It is primarily found in Trane commercial systems, including Intellipak, CGAM chillers, and large-tonnage rooftop units equipped with electronic expansion valves.
- How does this sensor impact system efficiency? By providing accurate suction temperature data, it allows the EEV to maintain the lowest possible stable superheat, maximizing coil surface utilization.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane SEN2892 is a critical 10k ohm NTC thermistor designed for precise suction line temperature monitoring in commercial HVAC and refrigeration systems. Engineered specifically for EEV superheat control, this sensor provides the high-accuracy resistance feedback necessary for electronic expansion valve modulation. By tracking the evaporator outlet temperature, it enables real-time refrigerant management to prevent liquid slugging and ensure optimal compressor protection in equipment ranging from 20 to 60 tons.
Housed in a rugged stainless steel casing with a 1/4" NPT male connection, the SEN2892 is built to withstand the demanding conditions of suction lines on chillers, rooftop units, and split systems. It serves as a direct Trane OEM replacement for the SEN02892, maintaining a resistance of 10,000 ohms at 25°C (77°F). For technicians, this sensor is the standard for troubleshooting suction temperature sensor failure diagnostics on Intellipak and CGAM platforms, where consistent HVAC temperature sensing is required to optimize evaporator performance and long-term system balance.
Key Benefits:- Accurate Superheat Regulation: Provides the critical temperature data needed for precise EEV modulation and refrigerant flow optimization.
- Industrial Durability: Features a moisture-resistant stainless steel housing with a standard 1/4" NPT fitting for reliable suction line mounting.
- OEM Compatibility: Designed for seamless integration with Trane building automation platforms and control architectures.
- Compressor Protection: Facilitates rapid response to temperature fluctuations to prevent hazardous liquid carryover into the compressor.
- Stable Thermal Feedback: Delivers consistent 10k ohm resistance-based data for long-term reliability in commercial environments.
- Where is the SEN2892 typically installed? This sensor should be mounted directly on the suction line, near the evaporator outlet, to provide accurate superheat calculations.
- What is the resistance specification for this sensor? It is a 10k ohm thermistor at 77°F (25°C), utilized by the controller to determine the saturated suction temperature.
- Which systems utilize the SEN2892? It is primarily found in Trane commercial systems, including Intellipak, CGAM chillers, and large-tonnage rooftop units equipped with electronic expansion valves.
- How does this sensor impact system efficiency? By providing accurate suction temperature data, it allows the EEV to maintain the lowest possible stable superheat, maximizing coil surface utilization.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
