Trane ORF1427 Orifice
The Trane ORF1427 (also identified under part number ORF01427) is a precision-engineered #45 brass orifice designed for critical gas flow regulation in Trane and American Standard furnaces and heating units. As an OEM component, this 0.045-inch diameter spud ensures precise metering of fuel into the burner assembly, maintaining the exact stoichiometric ratio required for efficient combustion and stable flame characteristics. High-grade brass construction provides essential resistance to thermal fatigue and corrosion within the burner manifold, preventing the common issues of gas port scaling or clogging that lead to incomplete combustion. This component is a direct replacement for residential HVAC systems and light commercial air handlers, engineered to meet factory tolerances for natural gas or propane configurations. Field technicians should verify the specific manifold pressure and BTU requirements of the equipment to ensure the #45 drill size matches the manufacturer’s manifold specifications for the local altitude and gas type.
Key Benefits
- OEM Precision: Genuine Trane replacement part ensures exact 0.045-inch opening for accurate fuel delivery.
- System Efficiency: Maintains proper gas-to-air mixture to optimize combustion performance and reduce fuel waste.
- Universal Compatibility: Fits an extensive range of Trane and American Standard furnaces, including S9V2 and A952 series.
- Durable Construction: Heavy-duty brass material stands up to high-temperature furnace environments without warping or degrading.
- Reliable Ignition: Ensures consistent gas flow regulation to prevent delayed ignition or burner pilot issues.
Common Questions
What is the drill size for a Trane ORF1427 orifice?
The ORF1427 is a #45 brass orifice, which corresponds to a precise hole diameter of 0.045 inches. It is vital to use the exact size specified in the furnace's technical manual to prevent over-firing or under-firing the burners.
Can this orifice be used for propane (LP) conversions?
Orifice sizing depends on the BTU rating and the gas type. While the Trane ORF1427 is a standard #45 orifice, always refer to the specific LP conversion kit instructions for your model, as propane typically requires smaller orifice diameters than natural gas due to its higher energy density.
When should the burner orifice be replaced?
Orifices should be inspected during routine maintenance for signs of corrosion, blockages, or enlargement caused by improper cleaning. If the burner assembly shows uneven flame patterns or if the HVAC system is being converted to a different fuel source, replacing the brass orifice is a standard technical requirement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Trane ORF1427 Orifice
The Trane ORF1427 (also identified under part number ORF01427) is a precision-engineered #45 brass orifice designed for critical gas flow regulation in Trane and American Standard furnaces and heating units. As an OEM component, this 0.045-inch diameter spud ensures precise metering of fuel into the burner assembly, maintaining the exact stoichiometric ratio required for efficient combustion and stable flame characteristics. High-grade brass construction provides essential resistance to thermal fatigue and corrosion within the burner manifold, preventing the common issues of gas port scaling or clogging that lead to incomplete combustion. This component is a direct replacement for residential HVAC systems and light commercial air handlers, engineered to meet factory tolerances for natural gas or propane configurations. Field technicians should verify the specific manifold pressure and BTU requirements of the equipment to ensure the #45 drill size matches the manufacturer’s manifold specifications for the local altitude and gas type.
Key Benefits
- OEM Precision: Genuine Trane replacement part ensures exact 0.045-inch opening for accurate fuel delivery.
- System Efficiency: Maintains proper gas-to-air mixture to optimize combustion performance and reduce fuel waste.
- Universal Compatibility: Fits an extensive range of Trane and American Standard furnaces, including S9V2 and A952 series.
- Durable Construction: Heavy-duty brass material stands up to high-temperature furnace environments without warping or degrading.
- Reliable Ignition: Ensures consistent gas flow regulation to prevent delayed ignition or burner pilot issues.
Common Questions
What is the drill size for a Trane ORF1427 orifice?
The ORF1427 is a #45 brass orifice, which corresponds to a precise hole diameter of 0.045 inches. It is vital to use the exact size specified in the furnace's technical manual to prevent over-firing or under-firing the burners.
Can this orifice be used for propane (LP) conversions?
Orifice sizing depends on the BTU rating and the gas type. While the Trane ORF1427 is a standard #45 orifice, always refer to the specific LP conversion kit instructions for your model, as propane typically requires smaller orifice diameters than natural gas due to its higher energy density.
When should the burner orifice be replaced?
Orifices should be inspected during routine maintenance for signs of corrosion, blockages, or enlargement caused by improper cleaning. If the burner assembly shows uneven flame patterns or if the HVAC system is being converted to a different fuel source, replacing the brass orifice is a standard technical requirement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane ORF1427 (also identified under part number ORF01427) is a precision-engineered #45 brass orifice designed for critical gas flow regulation in Trane and American Standard furnaces and heating units. As an OEM component, this 0.045-inch diameter spud ensures precise metering of fuel into the burner assembly, maintaining the exact stoichiometric ratio required for efficient combustion and stable flame characteristics. High-grade brass construction provides essential resistance to thermal fatigue and corrosion within the burner manifold, preventing the common issues of gas port scaling or clogging that lead to incomplete combustion. This component is a direct replacement for residential HVAC systems and light commercial air handlers, engineered to meet factory tolerances for natural gas or propane configurations. Field technicians should verify the specific manifold pressure and BTU requirements of the equipment to ensure the #45 drill size matches the manufacturer’s manifold specifications for the local altitude and gas type.
Key Benefits
- OEM Precision: Genuine Trane replacement part ensures exact 0.045-inch opening for accurate fuel delivery.
- System Efficiency: Maintains proper gas-to-air mixture to optimize combustion performance and reduce fuel waste.
- Universal Compatibility: Fits an extensive range of Trane and American Standard furnaces, including S9V2 and A952 series.
- Durable Construction: Heavy-duty brass material stands up to high-temperature furnace environments without warping or degrading.
- Reliable Ignition: Ensures consistent gas flow regulation to prevent delayed ignition or burner pilot issues.
Common Questions
What is the drill size for a Trane ORF1427 orifice?
The ORF1427 is a #45 brass orifice, which corresponds to a precise hole diameter of 0.045 inches. It is vital to use the exact size specified in the furnace's technical manual to prevent over-firing or under-firing the burners.
Can this orifice be used for propane (LP) conversions?
Orifice sizing depends on the BTU rating and the gas type. While the Trane ORF1427 is a standard #45 orifice, always refer to the specific LP conversion kit instructions for your model, as propane typically requires smaller orifice diameters than natural gas due to its higher energy density.
When should the burner orifice be replaced?
Orifices should be inspected during routine maintenance for signs of corrosion, blockages, or enlargement caused by improper cleaning. If the burner assembly shows uneven flame patterns or if the HVAC system is being converted to a different fuel source, replacing the brass orifice is a standard technical requirement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
