Trane IGN0152 Ignitor Nitrate
The Trane IGN0152 Ignitor Nitrate is a high-performance 120V hot surface ignitor engineered for precise compatibility with Trane and American Standard gas furnace systems. As a direct replacement for legacy part numbers like IGN00152, IGN152, and D156805, this nitride-style igniter offers significant durability improvements over older silicon carbide versions. Designed for 120-volt ignition circuits, it features a rapid-heat silicon nitride element that reaches ignition temperature quickly, reducing startup delays and minimizing wear on the gas valve. This OEM-spec component includes a right-angle mounting bracket and Molex connector for a seamless fit in tight furnace cabinets. For service technicians, ensuring the correct cold resistance—typically between 15–40 ohms for nitride elements—is critical for verifying furnace ignition system integrity. This robust construction is specifically built to withstand the high-cycle demands of modern high-efficiency HVAC equipment, ensuring reliable burner ignition throughout the heating season.
Key Benefits- Durable Nitride Construction: Engineered to resist vibration and thermal shock far better than traditional carbide igniters.
- OEM Precision Fit: Includes a right-angle bracket and the correct terminal ends for a drop-in replacement of Trane IGN00152.
- Rapid Heat-Up: Minimizes ignition lag to ensure efficient combustion and reduce gas accumulation during startup.
- Voltage Compatibility: Specifically rated for 120V furnace ignitor circuits, preventing the premature failure seen when using incorrect 80V parts.
How do I test the Trane IGN0152 with a multimeter?
Set your multimeter to ohms and check for continuity. A functional silicon nitride igniter should show a resistance reading within the manufacturer's specified range (typically under 50 ohms). If the circuit is open (infinite resistance), the igniter has failed and requires replacement.
Can I touch the igniter element during installation?
While nitride igniters are less sensitive than carbide, you should still avoid touching the heating element. Skin oils can create hot spots that degrade the element over time, leading to premature failure in high-demand HVAC heating systems.
Is this a direct replacement for an 80-volt system?
No. The IGN0152 is a 120V part. If your unit utilizes an 80V ignition board (often found in older communicating Trane units), you must use the specific 80V replacement unless the board has been upgraded to a 120V-compatible version.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $86.65
-65%$86.65
$30.33Trane IGN0152 Ignitor Nitrate
The Trane IGN0152 Ignitor Nitrate is a high-performance 120V hot surface ignitor engineered for precise compatibility with Trane and American Standard gas furnace systems. As a direct replacement for legacy part numbers like IGN00152, IGN152, and D156805, this nitride-style igniter offers significant durability improvements over older silicon carbide versions. Designed for 120-volt ignition circuits, it features a rapid-heat silicon nitride element that reaches ignition temperature quickly, reducing startup delays and minimizing wear on the gas valve. This OEM-spec component includes a right-angle mounting bracket and Molex connector for a seamless fit in tight furnace cabinets. For service technicians, ensuring the correct cold resistance—typically between 15–40 ohms for nitride elements—is critical for verifying furnace ignition system integrity. This robust construction is specifically built to withstand the high-cycle demands of modern high-efficiency HVAC equipment, ensuring reliable burner ignition throughout the heating season.
Key Benefits- Durable Nitride Construction: Engineered to resist vibration and thermal shock far better than traditional carbide igniters.
- OEM Precision Fit: Includes a right-angle bracket and the correct terminal ends for a drop-in replacement of Trane IGN00152.
- Rapid Heat-Up: Minimizes ignition lag to ensure efficient combustion and reduce gas accumulation during startup.
- Voltage Compatibility: Specifically rated for 120V furnace ignitor circuits, preventing the premature failure seen when using incorrect 80V parts.
How do I test the Trane IGN0152 with a multimeter?
Set your multimeter to ohms and check for continuity. A functional silicon nitride igniter should show a resistance reading within the manufacturer's specified range (typically under 50 ohms). If the circuit is open (infinite resistance), the igniter has failed and requires replacement.
Can I touch the igniter element during installation?
While nitride igniters are less sensitive than carbide, you should still avoid touching the heating element. Skin oils can create hot spots that degrade the element over time, leading to premature failure in high-demand HVAC heating systems.
Is this a direct replacement for an 80-volt system?
No. The IGN0152 is a 120V part. If your unit utilizes an 80V ignition board (often found in older communicating Trane units), you must use the specific 80V replacement unless the board has been upgraded to a 120V-compatible version.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane IGN0152 Ignitor Nitrate is a high-performance 120V hot surface ignitor engineered for precise compatibility with Trane and American Standard gas furnace systems. As a direct replacement for legacy part numbers like IGN00152, IGN152, and D156805, this nitride-style igniter offers significant durability improvements over older silicon carbide versions. Designed for 120-volt ignition circuits, it features a rapid-heat silicon nitride element that reaches ignition temperature quickly, reducing startup delays and minimizing wear on the gas valve. This OEM-spec component includes a right-angle mounting bracket and Molex connector for a seamless fit in tight furnace cabinets. For service technicians, ensuring the correct cold resistance—typically between 15–40 ohms for nitride elements—is critical for verifying furnace ignition system integrity. This robust construction is specifically built to withstand the high-cycle demands of modern high-efficiency HVAC equipment, ensuring reliable burner ignition throughout the heating season.
Key Benefits- Durable Nitride Construction: Engineered to resist vibration and thermal shock far better than traditional carbide igniters.
- OEM Precision Fit: Includes a right-angle bracket and the correct terminal ends for a drop-in replacement of Trane IGN00152.
- Rapid Heat-Up: Minimizes ignition lag to ensure efficient combustion and reduce gas accumulation during startup.
- Voltage Compatibility: Specifically rated for 120V furnace ignitor circuits, preventing the premature failure seen when using incorrect 80V parts.
How do I test the Trane IGN0152 with a multimeter?
Set your multimeter to ohms and check for continuity. A functional silicon nitride igniter should show a resistance reading within the manufacturer's specified range (typically under 50 ohms). If the circuit is open (infinite resistance), the igniter has failed and requires replacement.
Can I touch the igniter element during installation?
While nitride igniters are less sensitive than carbide, you should still avoid touching the heating element. Skin oils can create hot spots that degrade the element over time, leading to premature failure in high-demand HVAC heating systems.
Is this a direct replacement for an 80-volt system?
No. The IGN0152 is a 120V part. If your unit utilizes an 80V ignition board (often found in older communicating Trane units), you must use the specific 80V replacement unless the board has been upgraded to a 120V-compatible version.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
