Trane HTR15183 Heater
The Trane HTR15183 Heater is a critical compressor protection component designed for heavy-duty HVACR applications. This crankcase heater operates at dual service ratings, delivering 32W at 460V or 40W at 575V, depending on the system configuration. Its primary function is to maintain refrigeration oil temperature above the ambient saturation point during the off-cycle, preventing refrigerant migration into the oil. In cold climates or during prolonged downtime, this prevents liquid slugging and ensures proper lubrication during startup. As a genuine OEM Trane heating element, the HTR15183 is engineered with precise resistance tolerances to match the internal thermal requirements of specific scroll or reciprocating compressors. This heater ensures high dielectric strength and resistance to moisture ingress, critical for longevity in outdoor condensing units. For contractors performing preventative maintenance, verifying the integrity of the compressor belly band heater is essential to avoiding premature bearing wear and catastrophic mechanical failure in industrial cooling systems.
Key Performance Benefits
- Dual Voltage Compatibility: Rated for 460V/32W and 575V/40W configurations, providing versatile application across different electrical platforms.
- Optimized Thermal Transfer: Engineered for direct contact to ensure maximum heat dissipation into the compressor sump.
- Moisture Resistant Construction: Built to withstand the harsh environments found in commercial rooftop and split system units.
- OEM Reliability: Ensures exact fitment and amperage draw specifications to prevent nuisance trips or circuit overloads.
- System Protection: Effectively mitigates the risk of oil dilution and catastrophic liquid slugging during cold startups.
Common Installation and Application Questions
How do I verify if the HTR15183 is functioning correctly?
Technicians should check the heater's resistance using a multimeter set to ohms while the power is disconnected. Compare the reading to the calculated resistance based on the 460V/32W or 575V/40W ratings to ensure the element has not shorted or opened.
When should this crankcase heater be energized?
This heater should be energized through the compressor contactor's auxiliary contacts or a dedicated control circuit whenever the compressor is in the off-cycle. It must remain powered for at least 24 hours before initial system startup.
Can this heater be used on non-Trane compressors?
While the Trane HTR15183 is designed for specific OEM specifications, compatibility is determined by the compressor shell diameter and the voltage requirements. Always verify the physical fitment and wattage to ensure it meets the thermal needs of the lubricant volume.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $33.31
-65%$33.31
$11.66Trane HTR15183 Heater
The Trane HTR15183 Heater is a critical compressor protection component designed for heavy-duty HVACR applications. This crankcase heater operates at dual service ratings, delivering 32W at 460V or 40W at 575V, depending on the system configuration. Its primary function is to maintain refrigeration oil temperature above the ambient saturation point during the off-cycle, preventing refrigerant migration into the oil. In cold climates or during prolonged downtime, this prevents liquid slugging and ensures proper lubrication during startup. As a genuine OEM Trane heating element, the HTR15183 is engineered with precise resistance tolerances to match the internal thermal requirements of specific scroll or reciprocating compressors. This heater ensures high dielectric strength and resistance to moisture ingress, critical for longevity in outdoor condensing units. For contractors performing preventative maintenance, verifying the integrity of the compressor belly band heater is essential to avoiding premature bearing wear and catastrophic mechanical failure in industrial cooling systems.
Key Performance Benefits
- Dual Voltage Compatibility: Rated for 460V/32W and 575V/40W configurations, providing versatile application across different electrical platforms.
- Optimized Thermal Transfer: Engineered for direct contact to ensure maximum heat dissipation into the compressor sump.
- Moisture Resistant Construction: Built to withstand the harsh environments found in commercial rooftop and split system units.
- OEM Reliability: Ensures exact fitment and amperage draw specifications to prevent nuisance trips or circuit overloads.
- System Protection: Effectively mitigates the risk of oil dilution and catastrophic liquid slugging during cold startups.
Common Installation and Application Questions
How do I verify if the HTR15183 is functioning correctly?
Technicians should check the heater's resistance using a multimeter set to ohms while the power is disconnected. Compare the reading to the calculated resistance based on the 460V/32W or 575V/40W ratings to ensure the element has not shorted or opened.
When should this crankcase heater be energized?
This heater should be energized through the compressor contactor's auxiliary contacts or a dedicated control circuit whenever the compressor is in the off-cycle. It must remain powered for at least 24 hours before initial system startup.
Can this heater be used on non-Trane compressors?
While the Trane HTR15183 is designed for specific OEM specifications, compatibility is determined by the compressor shell diameter and the voltage requirements. Always verify the physical fitment and wattage to ensure it meets the thermal needs of the lubricant volume.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane HTR15183 Heater is a critical compressor protection component designed for heavy-duty HVACR applications. This crankcase heater operates at dual service ratings, delivering 32W at 460V or 40W at 575V, depending on the system configuration. Its primary function is to maintain refrigeration oil temperature above the ambient saturation point during the off-cycle, preventing refrigerant migration into the oil. In cold climates or during prolonged downtime, this prevents liquid slugging and ensures proper lubrication during startup. As a genuine OEM Trane heating element, the HTR15183 is engineered with precise resistance tolerances to match the internal thermal requirements of specific scroll or reciprocating compressors. This heater ensures high dielectric strength and resistance to moisture ingress, critical for longevity in outdoor condensing units. For contractors performing preventative maintenance, verifying the integrity of the compressor belly band heater is essential to avoiding premature bearing wear and catastrophic mechanical failure in industrial cooling systems.
Key Performance Benefits
- Dual Voltage Compatibility: Rated for 460V/32W and 575V/40W configurations, providing versatile application across different electrical platforms.
- Optimized Thermal Transfer: Engineered for direct contact to ensure maximum heat dissipation into the compressor sump.
- Moisture Resistant Construction: Built to withstand the harsh environments found in commercial rooftop and split system units.
- OEM Reliability: Ensures exact fitment and amperage draw specifications to prevent nuisance trips or circuit overloads.
- System Protection: Effectively mitigates the risk of oil dilution and catastrophic liquid slugging during cold startups.
Common Installation and Application Questions
How do I verify if the HTR15183 is functioning correctly?
Technicians should check the heater's resistance using a multimeter set to ohms while the power is disconnected. Compare the reading to the calculated resistance based on the 460V/32W or 575V/40W ratings to ensure the element has not shorted or opened.
When should this crankcase heater be energized?
This heater should be energized through the compressor contactor's auxiliary contacts or a dedicated control circuit whenever the compressor is in the off-cycle. It must remain powered for at least 24 hours before initial system startup.
Can this heater be used on non-Trane compressors?
While the Trane HTR15183 is designed for specific OEM specifications, compatibility is determined by the compressor shell diameter and the voltage requirements. Always verify the physical fitment and wattage to ensure it meets the thermal needs of the lubricant volume.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
