Trane CTR2061 Contactor
The Trane CTR2061 is a commercial-grade 3-pole HVAC contactor engineered for heavy-duty switching in industrial and large residential units. Designed to handle a full load of 12 Amps, this component is frequently found in multi-stage heating and cooling systems where precise circuit management is required. The 24V coil allows for seamless integration with standard low-voltage control circuits, ensuring the magnetic coil effectively pulls in the armature to complete the high-voltage connection to compressors or fan motors. For technicians performing a CTR2061 replacement, this OEM-spec contactor provides the exact physical footprint and electrical tolerances necessary to maintain system balance. Its three-pole configuration makes it essential for three-phase power applications, preventing the uneven wear often seen in lower-quality universal replacements. When troubleshooting "chattering" or "pitted contacts," installing a genuine Trane electrical contactor is the most professional way to restore reliable performance and prevent premature motor failure in demanding environments.
Key Benefits- 3-Pole Configuration: Optimized for three-phase power distribution, ensuring balanced load switching for industrial motors and compressors.
- 24VAC Control Circuit: Standard 24-volt coil voltage is compatible with almost all commercial Trane and American Standard control boards.
- 12 Amp Rating: Provides a robust electrical ceiling for high-demand HVACR applications without excessive heat generation.
- Compact Enclosure: Designed for tight control panels, allowing for quick installation and easy wiring in the field.
- Durable Contacts: Specifically engineered to minimize arcing and pitting, extending the life of the connected compressor.
Is the CTR2061 compatible with single-phase systems?
While this is a 3-pole contactor designed for three-phase power, it can technically be used in single-phase applications by utilizing only two of the poles. However, it is standard practice for technicians to match the pole count exactly to the original part to maintain system wiring integrity.
What are the signs of a failing 24V coil?
If you measure 24V at the coil terminals but the contactor does not pull in, or if you hear a loud humming/buzzing sound (chattering), the coil or the mechanical spring mechanism is likely compromised and requires replacement.
Can I use this to replace a contactor with a higher amp rating?
No. You should never downsize the amperage. If the original part was rated for 20A or 30A, the 12A CTR2061 will likely overheat and fail under load. Always match or exceed the original FLA (Full Load Amps) rating.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $230.38
-65%$230.38
$80.63Trane CTR2061 Contactor
The Trane CTR2061 is a commercial-grade 3-pole HVAC contactor engineered for heavy-duty switching in industrial and large residential units. Designed to handle a full load of 12 Amps, this component is frequently found in multi-stage heating and cooling systems where precise circuit management is required. The 24V coil allows for seamless integration with standard low-voltage control circuits, ensuring the magnetic coil effectively pulls in the armature to complete the high-voltage connection to compressors or fan motors. For technicians performing a CTR2061 replacement, this OEM-spec contactor provides the exact physical footprint and electrical tolerances necessary to maintain system balance. Its three-pole configuration makes it essential for three-phase power applications, preventing the uneven wear often seen in lower-quality universal replacements. When troubleshooting "chattering" or "pitted contacts," installing a genuine Trane electrical contactor is the most professional way to restore reliable performance and prevent premature motor failure in demanding environments.
Key Benefits- 3-Pole Configuration: Optimized for three-phase power distribution, ensuring balanced load switching for industrial motors and compressors.
- 24VAC Control Circuit: Standard 24-volt coil voltage is compatible with almost all commercial Trane and American Standard control boards.
- 12 Amp Rating: Provides a robust electrical ceiling for high-demand HVACR applications without excessive heat generation.
- Compact Enclosure: Designed for tight control panels, allowing for quick installation and easy wiring in the field.
- Durable Contacts: Specifically engineered to minimize arcing and pitting, extending the life of the connected compressor.
Is the CTR2061 compatible with single-phase systems?
While this is a 3-pole contactor designed for three-phase power, it can technically be used in single-phase applications by utilizing only two of the poles. However, it is standard practice for technicians to match the pole count exactly to the original part to maintain system wiring integrity.
What are the signs of a failing 24V coil?
If you measure 24V at the coil terminals but the contactor does not pull in, or if you hear a loud humming/buzzing sound (chattering), the coil or the mechanical spring mechanism is likely compromised and requires replacement.
Can I use this to replace a contactor with a higher amp rating?
No. You should never downsize the amperage. If the original part was rated for 20A or 30A, the 12A CTR2061 will likely overheat and fail under load. Always match or exceed the original FLA (Full Load Amps) rating.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane CTR2061 is a commercial-grade 3-pole HVAC contactor engineered for heavy-duty switching in industrial and large residential units. Designed to handle a full load of 12 Amps, this component is frequently found in multi-stage heating and cooling systems where precise circuit management is required. The 24V coil allows for seamless integration with standard low-voltage control circuits, ensuring the magnetic coil effectively pulls in the armature to complete the high-voltage connection to compressors or fan motors. For technicians performing a CTR2061 replacement, this OEM-spec contactor provides the exact physical footprint and electrical tolerances necessary to maintain system balance. Its three-pole configuration makes it essential for three-phase power applications, preventing the uneven wear often seen in lower-quality universal replacements. When troubleshooting "chattering" or "pitted contacts," installing a genuine Trane electrical contactor is the most professional way to restore reliable performance and prevent premature motor failure in demanding environments.
Key Benefits- 3-Pole Configuration: Optimized for three-phase power distribution, ensuring balanced load switching for industrial motors and compressors.
- 24VAC Control Circuit: Standard 24-volt coil voltage is compatible with almost all commercial Trane and American Standard control boards.
- 12 Amp Rating: Provides a robust electrical ceiling for high-demand HVACR applications without excessive heat generation.
- Compact Enclosure: Designed for tight control panels, allowing for quick installation and easy wiring in the field.
- Durable Contacts: Specifically engineered to minimize arcing and pitting, extending the life of the connected compressor.
Is the CTR2061 compatible with single-phase systems?
While this is a 3-pole contactor designed for three-phase power, it can technically be used in single-phase applications by utilizing only two of the poles. However, it is standard practice for technicians to match the pole count exactly to the original part to maintain system wiring integrity.
What are the signs of a failing 24V coil?
If you measure 24V at the coil terminals but the contactor does not pull in, or if you hear a loud humming/buzzing sound (chattering), the coil or the mechanical spring mechanism is likely compromised and requires replacement.
Can I use this to replace a contactor with a higher amp rating?
No. You should never downsize the amperage. If the original part was rated for 20A or 30A, the 12A CTR2061 will likely overheat and fail under load. Always match or exceed the original FLA (Full Load Amps) rating.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
