Trane COL29375 Solenoid Coil
The Trane COL29375 Solenoid Coil is a critical 24V AC reversing valve coil designed for precision switching in residential and commercial heat pump systems. Built to rigorous genuine Trane OEM specifications, this coil ensures the mechanical pilot valve within the heat pump reversing valve shifts reliably between heating and cooling modes. Operating on a 50/60 Hz frequency, the COL29375 is the direct engineering replacement for legacy part numbers VAL08212 and VAL19558. In the field, a failing solenoid coil often manifests as a system stuck in one mode or an audible "chatter" from the air handler; replacing the coil with this factory-spec component restores the magnetic force required to actuate the slide assembly. Its heavy-duty encapsulated design provides superior resistance to moisture and thermal stress, making it the professional choice for maintaining HVAC system efficiency and preventing compressor short-cycling in Trane and American Standard equipment.
Key Benefits for Technicians
- Direct OEM Compatibility: Engineered as the exact replacement for VAL08212 and VAL19558, ensuring the correct magnetic pull-in and holding current.
- Broad Application: Optimized for use in Trane and American Standard heat pump units requiring a 24V control signal.
- High Performance: Rated for 50/60 Hz systems, providing stable operation across different power grid standards without overheating.
- Simplified Service: Designed for quick installation on the valve stem, reducing labor time during emergency heating or cooling repairs.
Common Technical Questions
How do I verify if the COL29375 solenoid coil is defective?
Using a multimeter, technicians should check for 24V AC at the coil leads during a call for reversing valve energization. If voltage is present but the valve does not shift, check the coil for continuity or an open circuit. Resistance values should fall within factory-specified ranges for 24V Trane solenoids.
Does this coil replace VAL08212?
Yes, the Trane COL29375 is the official superseding part number for VAL08212 and VAL19558. It is designed to fit the existing valve stems found in those older configurations.
Can this coil be used on other brands?
While it may fit specific 24V stems, it is specifically engineered for Trane-sourced reversing valve applications. Technicians should verify the stem diameter and voltage requirements before attempting to install it on third-party valves.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $83.24
-65%$83.24
$29.13Trane COL29375 Solenoid Coil
The Trane COL29375 Solenoid Coil is a critical 24V AC reversing valve coil designed for precision switching in residential and commercial heat pump systems. Built to rigorous genuine Trane OEM specifications, this coil ensures the mechanical pilot valve within the heat pump reversing valve shifts reliably between heating and cooling modes. Operating on a 50/60 Hz frequency, the COL29375 is the direct engineering replacement for legacy part numbers VAL08212 and VAL19558. In the field, a failing solenoid coil often manifests as a system stuck in one mode or an audible "chatter" from the air handler; replacing the coil with this factory-spec component restores the magnetic force required to actuate the slide assembly. Its heavy-duty encapsulated design provides superior resistance to moisture and thermal stress, making it the professional choice for maintaining HVAC system efficiency and preventing compressor short-cycling in Trane and American Standard equipment.
Key Benefits for Technicians
- Direct OEM Compatibility: Engineered as the exact replacement for VAL08212 and VAL19558, ensuring the correct magnetic pull-in and holding current.
- Broad Application: Optimized for use in Trane and American Standard heat pump units requiring a 24V control signal.
- High Performance: Rated for 50/60 Hz systems, providing stable operation across different power grid standards without overheating.
- Simplified Service: Designed for quick installation on the valve stem, reducing labor time during emergency heating or cooling repairs.
Common Technical Questions
How do I verify if the COL29375 solenoid coil is defective?
Using a multimeter, technicians should check for 24V AC at the coil leads during a call for reversing valve energization. If voltage is present but the valve does not shift, check the coil for continuity or an open circuit. Resistance values should fall within factory-specified ranges for 24V Trane solenoids.
Does this coil replace VAL08212?
Yes, the Trane COL29375 is the official superseding part number for VAL08212 and VAL19558. It is designed to fit the existing valve stems found in those older configurations.
Can this coil be used on other brands?
While it may fit specific 24V stems, it is specifically engineered for Trane-sourced reversing valve applications. Technicians should verify the stem diameter and voltage requirements before attempting to install it on third-party valves.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Trane COL29375 Solenoid Coil is a critical 24V AC reversing valve coil designed for precision switching in residential and commercial heat pump systems. Built to rigorous genuine Trane OEM specifications, this coil ensures the mechanical pilot valve within the heat pump reversing valve shifts reliably between heating and cooling modes. Operating on a 50/60 Hz frequency, the COL29375 is the direct engineering replacement for legacy part numbers VAL08212 and VAL19558. In the field, a failing solenoid coil often manifests as a system stuck in one mode or an audible "chatter" from the air handler; replacing the coil with this factory-spec component restores the magnetic force required to actuate the slide assembly. Its heavy-duty encapsulated design provides superior resistance to moisture and thermal stress, making it the professional choice for maintaining HVAC system efficiency and preventing compressor short-cycling in Trane and American Standard equipment.
Key Benefits for Technicians
- Direct OEM Compatibility: Engineered as the exact replacement for VAL08212 and VAL19558, ensuring the correct magnetic pull-in and holding current.
- Broad Application: Optimized for use in Trane and American Standard heat pump units requiring a 24V control signal.
- High Performance: Rated for 50/60 Hz systems, providing stable operation across different power grid standards without overheating.
- Simplified Service: Designed for quick installation on the valve stem, reducing labor time during emergency heating or cooling repairs.
Common Technical Questions
How do I verify if the COL29375 solenoid coil is defective?
Using a multimeter, technicians should check for 24V AC at the coil leads during a call for reversing valve energization. If voltage is present but the valve does not shift, check the coil for continuity or an open circuit. Resistance values should fall within factory-specified ranges for 24V Trane solenoids.
Does this coil replace VAL08212?
Yes, the Trane COL29375 is the official superseding part number for VAL08212 and VAL19558. It is designed to fit the existing valve stems found in those older configurations.
Can this coil be used on other brands?
While it may fit specific 24V stems, it is specifically engineered for Trane-sourced reversing valve applications. Technicians should verify the stem diameter and voltage requirements before attempting to install it on third-party valves.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
