Tjernlund Products 950-1020 Motor
The Tjernlund Products 950-1020 Motor is a precision-engineered draft inducer motor designed specifically for Tjernlund HSJ, HS1, and HS2 power vent systems. This 115V, 3000 RPM single-phase motor features a 3.3-inch frame and is built to withstand the high-heat environments of sidewall venting applications. As a direct OEM replacement motor, it ensures the exact torque and static pressure required to maintain proper draft and purge combustion gases safely. The motor utilizes a sleeve bearing design and is thermally protected to prevent burnout during extended run cycles. Whether you are servicing a GPAK series unit or a standard Tjernlund power venter, this TJE9501020 motor kit provides the reliability needed for critical ventilation setups. Field-tested for durability, the 950-1020 maintains the specific shaft length and diameter necessary for perfect blower wheel alignment, preventing the vibration and noise issues common with generic aftermarket parts.
Key Benefits- Optimized Performance: Engineered for 3000 RPM to meet the strict static pressure requirements of HSJ and HS1 series systems.
- Direct OEM Fit: Features a standard 3.3-inch frame and 0.31-inch shaft diameter for seamless integration with existing blower wheels.
- High Heat Tolerance: Designed for sidewall venting environments where consistent cooling and thermal protection are vital.
- Broad Compatibility: Supports a wide range of models including GPAK-JT, HSUL-1, and VP3F.
How do I know if the 950-1020 motor needs replacement?
If the power venter fails to start, makes grinding noises (indicative of sleeve bearing wear), or causes the pressure switch to trip due to low RPM, the motor should be inspected. Always verify that 115V is reaching the motor leads before replacing.
Does this motor kit include the blower wheel?
No, the 950-1020 is the motor only. If your blower wheel is corroded or out of balance, it is recommended to replace it simultaneously to prevent premature bearing failure on the new motor.
Can I use this motor on 230V systems?
No, this is a 115V/120V 60Hz motor. Connecting it to a 230V power source will result in immediate failure and potential safety hazards.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Tjernlund Products 950-1020 Motor
The Tjernlund Products 950-1020 Motor is a precision-engineered draft inducer motor designed specifically for Tjernlund HSJ, HS1, and HS2 power vent systems. This 115V, 3000 RPM single-phase motor features a 3.3-inch frame and is built to withstand the high-heat environments of sidewall venting applications. As a direct OEM replacement motor, it ensures the exact torque and static pressure required to maintain proper draft and purge combustion gases safely. The motor utilizes a sleeve bearing design and is thermally protected to prevent burnout during extended run cycles. Whether you are servicing a GPAK series unit or a standard Tjernlund power venter, this TJE9501020 motor kit provides the reliability needed for critical ventilation setups. Field-tested for durability, the 950-1020 maintains the specific shaft length and diameter necessary for perfect blower wheel alignment, preventing the vibration and noise issues common with generic aftermarket parts.
Key Benefits- Optimized Performance: Engineered for 3000 RPM to meet the strict static pressure requirements of HSJ and HS1 series systems.
- Direct OEM Fit: Features a standard 3.3-inch frame and 0.31-inch shaft diameter for seamless integration with existing blower wheels.
- High Heat Tolerance: Designed for sidewall venting environments where consistent cooling and thermal protection are vital.
- Broad Compatibility: Supports a wide range of models including GPAK-JT, HSUL-1, and VP3F.
How do I know if the 950-1020 motor needs replacement?
If the power venter fails to start, makes grinding noises (indicative of sleeve bearing wear), or causes the pressure switch to trip due to low RPM, the motor should be inspected. Always verify that 115V is reaching the motor leads before replacing.
Does this motor kit include the blower wheel?
No, the 950-1020 is the motor only. If your blower wheel is corroded or out of balance, it is recommended to replace it simultaneously to prevent premature bearing failure on the new motor.
Can I use this motor on 230V systems?
No, this is a 115V/120V 60Hz motor. Connecting it to a 230V power source will result in immediate failure and potential safety hazards.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Tjernlund Products 950-1020 Motor is a precision-engineered draft inducer motor designed specifically for Tjernlund HSJ, HS1, and HS2 power vent systems. This 115V, 3000 RPM single-phase motor features a 3.3-inch frame and is built to withstand the high-heat environments of sidewall venting applications. As a direct OEM replacement motor, it ensures the exact torque and static pressure required to maintain proper draft and purge combustion gases safely. The motor utilizes a sleeve bearing design and is thermally protected to prevent burnout during extended run cycles. Whether you are servicing a GPAK series unit or a standard Tjernlund power venter, this TJE9501020 motor kit provides the reliability needed for critical ventilation setups. Field-tested for durability, the 950-1020 maintains the specific shaft length and diameter necessary for perfect blower wheel alignment, preventing the vibration and noise issues common with generic aftermarket parts.
Key Benefits- Optimized Performance: Engineered for 3000 RPM to meet the strict static pressure requirements of HSJ and HS1 series systems.
- Direct OEM Fit: Features a standard 3.3-inch frame and 0.31-inch shaft diameter for seamless integration with existing blower wheels.
- High Heat Tolerance: Designed for sidewall venting environments where consistent cooling and thermal protection are vital.
- Broad Compatibility: Supports a wide range of models including GPAK-JT, HSUL-1, and VP3F.
How do I know if the 950-1020 motor needs replacement?
If the power venter fails to start, makes grinding noises (indicative of sleeve bearing wear), or causes the pressure switch to trip due to low RPM, the motor should be inspected. Always verify that 115V is reaching the motor leads before replacing.
Does this motor kit include the blower wheel?
No, the 950-1020 is the motor only. If your blower wheel is corroded or out of balance, it is recommended to replace it simultaneously to prevent premature bearing failure on the new motor.
Can I use this motor on 230V systems?
No, this is a 115V/120V 60Hz motor. Connecting it to a 230V power source will result in immediate failure and potential safety hazards.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
