Tjernlund Products 950-1013 Wheel Kit
The Tjernlund 950-1013 Wheel Kit is a precision-engineered OEM replacement blower wheel designed for high-performance air movement in specific Tjernlund HS-Series power venters. As a critical component for maintaining the induced draft required for safe appliance operation, this centrifugal blower wheel is balanced at the factory to eliminate vibration, reducing bearing wear on the motor and ensuring quiet decibel levels during heating cycles. When field-diagnosing draft issues or mechanical noise in HS3, HS4, and HS115-4 models, swapping the blower wheel is often necessary if the blades are fouled with soot or if the wheel has become misaligned. This kit provides an exact Tjernlund 950-1013 match to original factory specifications, supporting the static pressure requirements needed for proper combustion air and flue gas venting. For contractors managing HVAC power venter repair, this wheel ensures the system returns to its peak CFM output and operational efficiency without the risk of mismatching shaft tolerances.
Key Benefits- Precision Balance: Factory-aligned to ensure vibration-free operation and to protect the motor shaft and bearings from premature failure.
- Broad Compatibility: Specifically engineered for a seamless fit in Tjernlund HS3, HS4, and HS115-4 power venting systems.
- Industrial-Grade Construction: Built with high-strength materials to withstand the thermal stress and corrosive flue gases common in venting applications.
- Optimized Airflow: The aerodynamic blade geometry is designed to maintain consistent static pressure and efficient gas venting.
Which specific units is the Tjernlund 950-1013 compatible with?
This wheel kit is designed for the Tjernlund HS3, HS4, and HS115-4 models. It is frequently cross-referenced with Grainger part number 4KA75.
Is the mounting hardware included with the 950-1013 wheel?
This is a comprehensive wheel kit intended to replace the rotating element; please verify if your specific installation requires the reuse of the existing shaft extension or set screws based on the current assembly condition.
How do I know if the blower wheel needs to be replaced?
Signs of failure include excessive vibration during the venting cycle, rhythmic scraping noises, or a noticeable drop in draft pressure that triggers the safety pressure switch.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Tjernlund Products 950-1013 Wheel Kit
The Tjernlund 950-1013 Wheel Kit is a precision-engineered OEM replacement blower wheel designed for high-performance air movement in specific Tjernlund HS-Series power venters. As a critical component for maintaining the induced draft required for safe appliance operation, this centrifugal blower wheel is balanced at the factory to eliminate vibration, reducing bearing wear on the motor and ensuring quiet decibel levels during heating cycles. When field-diagnosing draft issues or mechanical noise in HS3, HS4, and HS115-4 models, swapping the blower wheel is often necessary if the blades are fouled with soot or if the wheel has become misaligned. This kit provides an exact Tjernlund 950-1013 match to original factory specifications, supporting the static pressure requirements needed for proper combustion air and flue gas venting. For contractors managing HVAC power venter repair, this wheel ensures the system returns to its peak CFM output and operational efficiency without the risk of mismatching shaft tolerances.
Key Benefits- Precision Balance: Factory-aligned to ensure vibration-free operation and to protect the motor shaft and bearings from premature failure.
- Broad Compatibility: Specifically engineered for a seamless fit in Tjernlund HS3, HS4, and HS115-4 power venting systems.
- Industrial-Grade Construction: Built with high-strength materials to withstand the thermal stress and corrosive flue gases common in venting applications.
- Optimized Airflow: The aerodynamic blade geometry is designed to maintain consistent static pressure and efficient gas venting.
Which specific units is the Tjernlund 950-1013 compatible with?
This wheel kit is designed for the Tjernlund HS3, HS4, and HS115-4 models. It is frequently cross-referenced with Grainger part number 4KA75.
Is the mounting hardware included with the 950-1013 wheel?
This is a comprehensive wheel kit intended to replace the rotating element; please verify if your specific installation requires the reuse of the existing shaft extension or set screws based on the current assembly condition.
How do I know if the blower wheel needs to be replaced?
Signs of failure include excessive vibration during the venting cycle, rhythmic scraping noises, or a noticeable drop in draft pressure that triggers the safety pressure switch.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Tjernlund 950-1013 Wheel Kit is a precision-engineered OEM replacement blower wheel designed for high-performance air movement in specific Tjernlund HS-Series power venters. As a critical component for maintaining the induced draft required for safe appliance operation, this centrifugal blower wheel is balanced at the factory to eliminate vibration, reducing bearing wear on the motor and ensuring quiet decibel levels during heating cycles. When field-diagnosing draft issues or mechanical noise in HS3, HS4, and HS115-4 models, swapping the blower wheel is often necessary if the blades are fouled with soot or if the wheel has become misaligned. This kit provides an exact Tjernlund 950-1013 match to original factory specifications, supporting the static pressure requirements needed for proper combustion air and flue gas venting. For contractors managing HVAC power venter repair, this wheel ensures the system returns to its peak CFM output and operational efficiency without the risk of mismatching shaft tolerances.
Key Benefits- Precision Balance: Factory-aligned to ensure vibration-free operation and to protect the motor shaft and bearings from premature failure.
- Broad Compatibility: Specifically engineered for a seamless fit in Tjernlund HS3, HS4, and HS115-4 power venting systems.
- Industrial-Grade Construction: Built with high-strength materials to withstand the thermal stress and corrosive flue gases common in venting applications.
- Optimized Airflow: The aerodynamic blade geometry is designed to maintain consistent static pressure and efficient gas venting.
Which specific units is the Tjernlund 950-1013 compatible with?
This wheel kit is designed for the Tjernlund HS3, HS4, and HS115-4 models. It is frequently cross-referenced with Grainger part number 4KA75.
Is the mounting hardware included with the 950-1013 wheel?
This is a comprehensive wheel kit intended to replace the rotating element; please verify if your specific installation requires the reuse of the existing shaft extension or set screws based on the current assembly condition.
How do I know if the blower wheel needs to be replaced?
Signs of failure include excessive vibration during the venting cycle, rhythmic scraping noises, or a noticeable drop in draft pressure that triggers the safety pressure switch.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
