Tecumseh 84096-2 Pressure Switch
The Tecumseh 84096-2 Pressure Switch is a critical high-side safety component engineered for commercial refrigeration and industrial HVAC systems. This 195/275# NO Pressure Switch operates with a normally open configuration, designed to manage system cycling and prevent over-pressurization. Featuring a precise cut-in pressure of 195 PSI and a cut-out pressure of 275 PSI, this switch ensures the compressor operates within safe parameters. Field-proven for its durability, the 84096-2 OEM replacement is compatible with various Tecumseh condensing units and specialized cooling gear. As a refrigerant pressure control device, it provides reliable switching performance in demanding environments where ambient temperatures and vibration are constant factors. Whether you are performing a routine service or a major system overhaul, utilizing this HVAC pressure switch ensures your technical specifications remain within manufacturer tolerances, protecting the compressor from damage caused by high head pressure. Rely on its robust construction to maintain the tight pressure range regulation required for modern high-efficiency cooling applications.
Key Benefit List- Precise Pressure Management: Specifically calibrated for high-side monitoring with a 195/275 PSI operating range to maintain consistent system safety.
- Normally Open (NO) Configuration: Designed for specific control circuits that require circuit closure upon reaching designated pressure thresholds.
- Direct OEM Compatibility: Ensures a seamless fit and accurate electrical interface when replacing factory-installed Tecumseh 84096-2 controls.
- Industrial-Grade Reliability: Built to withstand the rigors of commercial refrigeration, reducing the frequency of nuisance tripping in high-vibration environments.
- Optimized System Longevity: Prevents excessive wear on the compressor by regulating head pressure and ensuring efficient cooling cycles.
What is the difference between this and a standard low-pressure cut-out?
The Tecumseh 84096-2 is a high-side control with specific setpoints at 195 and 275 PSI, whereas low-pressure switches typically monitor suction pressure to protect against loss of charge or coil freeze-ups.
Can I use this switch with R-404A or R-134a systems?
Yes, this switch is designed for refrigeration systems where the head pressure falls within its specified range. Always verify your specific refrigerant’s pressure-temperature chart to ensure these setpoints meet your safety requirements.
How do I verify if the switch is failing?
Technicians should check for continuity across the terminals when the system reaches the cut-off pressure. If the switch remains open or fails to reset at 195 PSI, it likely requires replacement due to contact pitting or diaphragm fatigue.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $59.77
-65%$59.77
$20.92Tecumseh 84096-2 Pressure Switch
The Tecumseh 84096-2 Pressure Switch is a critical high-side safety component engineered for commercial refrigeration and industrial HVAC systems. This 195/275# NO Pressure Switch operates with a normally open configuration, designed to manage system cycling and prevent over-pressurization. Featuring a precise cut-in pressure of 195 PSI and a cut-out pressure of 275 PSI, this switch ensures the compressor operates within safe parameters. Field-proven for its durability, the 84096-2 OEM replacement is compatible with various Tecumseh condensing units and specialized cooling gear. As a refrigerant pressure control device, it provides reliable switching performance in demanding environments where ambient temperatures and vibration are constant factors. Whether you are performing a routine service or a major system overhaul, utilizing this HVAC pressure switch ensures your technical specifications remain within manufacturer tolerances, protecting the compressor from damage caused by high head pressure. Rely on its robust construction to maintain the tight pressure range regulation required for modern high-efficiency cooling applications.
Key Benefit List- Precise Pressure Management: Specifically calibrated for high-side monitoring with a 195/275 PSI operating range to maintain consistent system safety.
- Normally Open (NO) Configuration: Designed for specific control circuits that require circuit closure upon reaching designated pressure thresholds.
- Direct OEM Compatibility: Ensures a seamless fit and accurate electrical interface when replacing factory-installed Tecumseh 84096-2 controls.
- Industrial-Grade Reliability: Built to withstand the rigors of commercial refrigeration, reducing the frequency of nuisance tripping in high-vibration environments.
- Optimized System Longevity: Prevents excessive wear on the compressor by regulating head pressure and ensuring efficient cooling cycles.
What is the difference between this and a standard low-pressure cut-out?
The Tecumseh 84096-2 is a high-side control with specific setpoints at 195 and 275 PSI, whereas low-pressure switches typically monitor suction pressure to protect against loss of charge or coil freeze-ups.
Can I use this switch with R-404A or R-134a systems?
Yes, this switch is designed for refrigeration systems where the head pressure falls within its specified range. Always verify your specific refrigerant’s pressure-temperature chart to ensure these setpoints meet your safety requirements.
How do I verify if the switch is failing?
Technicians should check for continuity across the terminals when the system reaches the cut-off pressure. If the switch remains open or fails to reset at 195 PSI, it likely requires replacement due to contact pitting or diaphragm fatigue.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Tecumseh 84096-2 Pressure Switch is a critical high-side safety component engineered for commercial refrigeration and industrial HVAC systems. This 195/275# NO Pressure Switch operates with a normally open configuration, designed to manage system cycling and prevent over-pressurization. Featuring a precise cut-in pressure of 195 PSI and a cut-out pressure of 275 PSI, this switch ensures the compressor operates within safe parameters. Field-proven for its durability, the 84096-2 OEM replacement is compatible with various Tecumseh condensing units and specialized cooling gear. As a refrigerant pressure control device, it provides reliable switching performance in demanding environments where ambient temperatures and vibration are constant factors. Whether you are performing a routine service or a major system overhaul, utilizing this HVAC pressure switch ensures your technical specifications remain within manufacturer tolerances, protecting the compressor from damage caused by high head pressure. Rely on its robust construction to maintain the tight pressure range regulation required for modern high-efficiency cooling applications.
Key Benefit List- Precise Pressure Management: Specifically calibrated for high-side monitoring with a 195/275 PSI operating range to maintain consistent system safety.
- Normally Open (NO) Configuration: Designed for specific control circuits that require circuit closure upon reaching designated pressure thresholds.
- Direct OEM Compatibility: Ensures a seamless fit and accurate electrical interface when replacing factory-installed Tecumseh 84096-2 controls.
- Industrial-Grade Reliability: Built to withstand the rigors of commercial refrigeration, reducing the frequency of nuisance tripping in high-vibration environments.
- Optimized System Longevity: Prevents excessive wear on the compressor by regulating head pressure and ensuring efficient cooling cycles.
What is the difference between this and a standard low-pressure cut-out?
The Tecumseh 84096-2 is a high-side control with specific setpoints at 195 and 275 PSI, whereas low-pressure switches typically monitor suction pressure to protect against loss of charge or coil freeze-ups.
Can I use this switch with R-404A or R-134a systems?
Yes, this switch is designed for refrigeration systems where the head pressure falls within its specified range. Always verify your specific refrigerant’s pressure-temperature chart to ensure these setpoints meet your safety requirements.
How do I verify if the switch is failing?
Technicians should check for continuity across the terminals when the system reaches the cut-off pressure. If the switch remains open or fails to reset at 195 PSI, it likely requires replacement due to contact pitting or diaphragm fatigue.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
