Tecumseh 8300MRAD96 Overload
The Tecumseh 8300MRAD96 Overload is an essential internal protection component designed specifically for hermetic compressors, providing a critical line of defense against motor burnout. Engineered for the AKA8494EXV compressor model, this automatic reset overload protector monitors current draw and winding temperature to prevent catastrophic failure during locked rotor conditions or phase loss. For contractors servicing commercial refrigeration systems, this OEM part ensuring voltage compatibility of 265V/60Hz/1Phase is vital for maintaining the thermal protection profile of the circuit.
Operating as a bimetallic thermal overload, the 8300MRAD96 breaks the common circuit when it detects excessive heat or amperage, effectively short-cycling the compressor before the windings sustain permanent damage. Its snap-action design ensures a clean break, reducing arcing at the contacts. When troubleshooting a compressor that hums but fails to start, verify the 8300MRAD96 thermal protector for continuity. Replacing a fatigued or tripped overload with this genuine Tecumseh replacement part restores the system to its original manufacturer specifications, ensuring the unit operates within its safe thermal limits without the marketing fluff of aftermarket "universal" alternatives.
Key Benefits:- Precision Thermal Response: Specifically calibrated for the AKA8494EXV compressor, providing accurate trip points for 265V single-phase applications.
- Automatic Reset Functionality: Minimizes downtime by allowing the compressor to resume operation once safe temperatures are reached, eliminating the need for manual intervention.
- OEM Integrity: Maintains the UL and CSA safety ratings of the original equipment, ensuring the compressor motor protection is consistent with factory standards.
- Durable Bimetallic Disc: Constructed with high-grade materials to withstand frequent cycling in demanding industrial and commercial HVACR environments.
How do I test if the 8300MRAD96 overload is defective?
Using a multimeter set to the ohms scale, check for continuity across the terminals while the part is at room temperature. If the circuit is open (infinite resistance) when the compressor is cold, the overload protector has failed and requires replacement.
Can I use this on a 230V or 115V system?
No. This component is specifically rated for 265V/60Hz systems. Using an overload with incorrect voltage ratings can lead to improper trip timing, either causing nuisance tripping or failing to protect the compressor during a genuine overcurrent event.
What causes this part to trip frequently?
Frequent tripping is often a symptom of underlying issues such as a bad start capacitor, a failing capacitor start relay, low system voltage, or a compressor with restricted mechanical movement. Always check the LRA (Locked Rotor Amps) against the overload's specifications during troubleshooting.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $8.72
-65%$8.72
$3.05Tecumseh 8300MRAD96 Overload
The Tecumseh 8300MRAD96 Overload is an essential internal protection component designed specifically for hermetic compressors, providing a critical line of defense against motor burnout. Engineered for the AKA8494EXV compressor model, this automatic reset overload protector monitors current draw and winding temperature to prevent catastrophic failure during locked rotor conditions or phase loss. For contractors servicing commercial refrigeration systems, this OEM part ensuring voltage compatibility of 265V/60Hz/1Phase is vital for maintaining the thermal protection profile of the circuit.
Operating as a bimetallic thermal overload, the 8300MRAD96 breaks the common circuit when it detects excessive heat or amperage, effectively short-cycling the compressor before the windings sustain permanent damage. Its snap-action design ensures a clean break, reducing arcing at the contacts. When troubleshooting a compressor that hums but fails to start, verify the 8300MRAD96 thermal protector for continuity. Replacing a fatigued or tripped overload with this genuine Tecumseh replacement part restores the system to its original manufacturer specifications, ensuring the unit operates within its safe thermal limits without the marketing fluff of aftermarket "universal" alternatives.
Key Benefits:- Precision Thermal Response: Specifically calibrated for the AKA8494EXV compressor, providing accurate trip points for 265V single-phase applications.
- Automatic Reset Functionality: Minimizes downtime by allowing the compressor to resume operation once safe temperatures are reached, eliminating the need for manual intervention.
- OEM Integrity: Maintains the UL and CSA safety ratings of the original equipment, ensuring the compressor motor protection is consistent with factory standards.
- Durable Bimetallic Disc: Constructed with high-grade materials to withstand frequent cycling in demanding industrial and commercial HVACR environments.
How do I test if the 8300MRAD96 overload is defective?
Using a multimeter set to the ohms scale, check for continuity across the terminals while the part is at room temperature. If the circuit is open (infinite resistance) when the compressor is cold, the overload protector has failed and requires replacement.
Can I use this on a 230V or 115V system?
No. This component is specifically rated for 265V/60Hz systems. Using an overload with incorrect voltage ratings can lead to improper trip timing, either causing nuisance tripping or failing to protect the compressor during a genuine overcurrent event.
What causes this part to trip frequently?
Frequent tripping is often a symptom of underlying issues such as a bad start capacitor, a failing capacitor start relay, low system voltage, or a compressor with restricted mechanical movement. Always check the LRA (Locked Rotor Amps) against the overload's specifications during troubleshooting.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Tecumseh 8300MRAD96 Overload is an essential internal protection component designed specifically for hermetic compressors, providing a critical line of defense against motor burnout. Engineered for the AKA8494EXV compressor model, this automatic reset overload protector monitors current draw and winding temperature to prevent catastrophic failure during locked rotor conditions or phase loss. For contractors servicing commercial refrigeration systems, this OEM part ensuring voltage compatibility of 265V/60Hz/1Phase is vital for maintaining the thermal protection profile of the circuit.
Operating as a bimetallic thermal overload, the 8300MRAD96 breaks the common circuit when it detects excessive heat or amperage, effectively short-cycling the compressor before the windings sustain permanent damage. Its snap-action design ensures a clean break, reducing arcing at the contacts. When troubleshooting a compressor that hums but fails to start, verify the 8300MRAD96 thermal protector for continuity. Replacing a fatigued or tripped overload with this genuine Tecumseh replacement part restores the system to its original manufacturer specifications, ensuring the unit operates within its safe thermal limits without the marketing fluff of aftermarket "universal" alternatives.
Key Benefits:- Precision Thermal Response: Specifically calibrated for the AKA8494EXV compressor, providing accurate trip points for 265V single-phase applications.
- Automatic Reset Functionality: Minimizes downtime by allowing the compressor to resume operation once safe temperatures are reached, eliminating the need for manual intervention.
- OEM Integrity: Maintains the UL and CSA safety ratings of the original equipment, ensuring the compressor motor protection is consistent with factory standards.
- Durable Bimetallic Disc: Constructed with high-grade materials to withstand frequent cycling in demanding industrial and commercial HVACR environments.
How do I test if the 8300MRAD96 overload is defective?
Using a multimeter set to the ohms scale, check for continuity across the terminals while the part is at room temperature. If the circuit is open (infinite resistance) when the compressor is cold, the overload protector has failed and requires replacement.
Can I use this on a 230V or 115V system?
No. This component is specifically rated for 265V/60Hz systems. Using an overload with incorrect voltage ratings can lead to improper trip timing, either causing nuisance tripping or failing to protect the compressor during a genuine overcurrent event.
What causes this part to trip frequently?
Frequent tripping is often a symptom of underlying issues such as a bad start capacitor, a failing capacitor start relay, low system voltage, or a compressor with restricted mechanical movement. Always check the LRA (Locked Rotor Amps) against the overload's specifications during troubleshooting.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
