Sporlan 409600P Valve
The Sporlan 409600P, also identified as the P8D7B-HP 7/8" ODF Reclaim Valve, is a high-pressure, pilot-operated 3-way valve designed for critical refrigerant management in commercial refrigeration and HVAC systems. As a veteran-grade heat reclaim valve, the P8D7B-HP is engineered to divert hot gas from the compressor to either the normal condenser or an auxiliary heat reclaim coil, maximizing system efficiency by capturing heat that would otherwise be rejected. This specific "B" type model features a bleed rate through the piston to facilitate the integral pump-out of the reclaim condenser, ensuring a smooth transition back to standard cooling mode without liquid slugging risks.
Built with a powder-coated steel body and extended copper ODF connections, this valve allows for direct brazing into the line without disassembly, saving significant time on the job site. The 7/8" ODF connection and 3/4" port size provide high-flow capacity with a Maximum Rated Pressure (MRP) of 450 psi, making it fully compatible with modern high-pressure refrigerants including R-410A, R-404A, and R-407C. It utilizes a synthetic seating material for tight closing, preventing high-to-low side leaks and maintaining a constant oil level in the compressor crankcase for sustained lubrication under heavy cycles.
- Efficient Heat Recovery: Diverts hot discharge gas to auxiliary coils for "free" supplemental heating or reheat applications.
- Internal Pump-Out: The "B" type piston design allows the reclaim condenser to pump out to the suction side upon de-energizing.
- Durable Construction: High-pressure steel body with extended copper ends ensures leak-free performance in demanding industrial environments.
- Broad Compatibility: Rated for use with R-22, R-134a, R-404A, R-407C, R-409A, R-410A, and R-507.
- Simplified Installation: Designed for mounting in vertical or horizontal lines using standard MKC-1 solenoid coils (sold separately).
Common Questions
What is the difference between the "B" and "C" type Sporlan reclaim valves?
The "B" type, like the P8D7B-HP, includes a bleed hole in the piston to allow for the pump-out of the reclaim coil when the valve is in the normal condenser position. The "C" type is non-bleed and should be used where a separate solenoid valve handles the pump-out.
Does this valve come with a solenoid coil?
No, the 409600P is a "less coil" model. It requires an MKC-1 solenoid coil, which must be selected based on your specific system voltage requirements (e.g., 24V, 120V, or 240V).
Can I install this valve in any orientation?
Yes, the 8D series is designed to be mounted in either horizontal or vertical lines, provided the coil housing remains above the horizontal plane to prevent debris from settling in the pilot assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Sporlan 409600P Valve
The Sporlan 409600P, also identified as the P8D7B-HP 7/8" ODF Reclaim Valve, is a high-pressure, pilot-operated 3-way valve designed for critical refrigerant management in commercial refrigeration and HVAC systems. As a veteran-grade heat reclaim valve, the P8D7B-HP is engineered to divert hot gas from the compressor to either the normal condenser or an auxiliary heat reclaim coil, maximizing system efficiency by capturing heat that would otherwise be rejected. This specific "B" type model features a bleed rate through the piston to facilitate the integral pump-out of the reclaim condenser, ensuring a smooth transition back to standard cooling mode without liquid slugging risks.
Built with a powder-coated steel body and extended copper ODF connections, this valve allows for direct brazing into the line without disassembly, saving significant time on the job site. The 7/8" ODF connection and 3/4" port size provide high-flow capacity with a Maximum Rated Pressure (MRP) of 450 psi, making it fully compatible with modern high-pressure refrigerants including R-410A, R-404A, and R-407C. It utilizes a synthetic seating material for tight closing, preventing high-to-low side leaks and maintaining a constant oil level in the compressor crankcase for sustained lubrication under heavy cycles.
- Efficient Heat Recovery: Diverts hot discharge gas to auxiliary coils for "free" supplemental heating or reheat applications.
- Internal Pump-Out: The "B" type piston design allows the reclaim condenser to pump out to the suction side upon de-energizing.
- Durable Construction: High-pressure steel body with extended copper ends ensures leak-free performance in demanding industrial environments.
- Broad Compatibility: Rated for use with R-22, R-134a, R-404A, R-407C, R-409A, R-410A, and R-507.
- Simplified Installation: Designed for mounting in vertical or horizontal lines using standard MKC-1 solenoid coils (sold separately).
Common Questions
What is the difference between the "B" and "C" type Sporlan reclaim valves?
The "B" type, like the P8D7B-HP, includes a bleed hole in the piston to allow for the pump-out of the reclaim coil when the valve is in the normal condenser position. The "C" type is non-bleed and should be used where a separate solenoid valve handles the pump-out.
Does this valve come with a solenoid coil?
No, the 409600P is a "less coil" model. It requires an MKC-1 solenoid coil, which must be selected based on your specific system voltage requirements (e.g., 24V, 120V, or 240V).
Can I install this valve in any orientation?
Yes, the 8D series is designed to be mounted in either horizontal or vertical lines, provided the coil housing remains above the horizontal plane to prevent debris from settling in the pilot assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Sporlan 409600P, also identified as the P8D7B-HP 7/8" ODF Reclaim Valve, is a high-pressure, pilot-operated 3-way valve designed for critical refrigerant management in commercial refrigeration and HVAC systems. As a veteran-grade heat reclaim valve, the P8D7B-HP is engineered to divert hot gas from the compressor to either the normal condenser or an auxiliary heat reclaim coil, maximizing system efficiency by capturing heat that would otherwise be rejected. This specific "B" type model features a bleed rate through the piston to facilitate the integral pump-out of the reclaim condenser, ensuring a smooth transition back to standard cooling mode without liquid slugging risks.
Built with a powder-coated steel body and extended copper ODF connections, this valve allows for direct brazing into the line without disassembly, saving significant time on the job site. The 7/8" ODF connection and 3/4" port size provide high-flow capacity with a Maximum Rated Pressure (MRP) of 450 psi, making it fully compatible with modern high-pressure refrigerants including R-410A, R-404A, and R-407C. It utilizes a synthetic seating material for tight closing, preventing high-to-low side leaks and maintaining a constant oil level in the compressor crankcase for sustained lubrication under heavy cycles.
- Efficient Heat Recovery: Diverts hot discharge gas to auxiliary coils for "free" supplemental heating or reheat applications.
- Internal Pump-Out: The "B" type piston design allows the reclaim condenser to pump out to the suction side upon de-energizing.
- Durable Construction: High-pressure steel body with extended copper ends ensures leak-free performance in demanding industrial environments.
- Broad Compatibility: Rated for use with R-22, R-134a, R-404A, R-407C, R-409A, R-410A, and R-507.
- Simplified Installation: Designed for mounting in vertical or horizontal lines using standard MKC-1 solenoid coils (sold separately).
Common Questions
What is the difference between the "B" and "C" type Sporlan reclaim valves?
The "B" type, like the P8D7B-HP, includes a bleed hole in the piston to allow for the pump-out of the reclaim coil when the valve is in the normal condenser position. The "C" type is non-bleed and should be used where a separate solenoid valve handles the pump-out.
Does this valve come with a solenoid coil?
No, the 409600P is a "less coil" model. It requires an MKC-1 solenoid coil, which must be selected based on your specific system voltage requirements (e.g., 24V, 120V, or 240V).
Can I install this valve in any orientation?
Yes, the 8D series is designed to be mounted in either horizontal or vertical lines, provided the coil housing remains above the horizontal plane to prevent debris from settling in the pilot assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
