Spartan Valves TE150H Thermostat
The Spartan Valves TE150H is a high-performance dual output modulating thermostat engineered for precise environmental control in commercial and industrial HVAC applications. Operating on a 24Vac power supply, this unit provides a versatile 0-10Vdc or 2-10Vdc signal to drive modulating valves and actuators with accuracy. Utilizing a Proportional plus Integral (P+I) control loop, the TE150H eliminates temperature offset and maintains tight setpoint stability. The high-contrast LCD display provides clear feedback on ambient temperature and system status, while the high temperature range capabilities make it suitable for specialized heating and cooling sequences, including control of electric duct heaters and multi-valve configurations.
For contractors looking for field flexibility, the Spartan TE150H thermostat includes selectable Direct Acting (DA) or Reverse Acting (RA) configurations via DIP switches. It supports external 10K NTC sensor inputs for discharge air or return air monitoring, providing a robust solution for AHUs and fan coil units. The integrated EEPROM memory ensures that all setpoints and system parameters are retained during power losses, preventing the need for site revisits. Whether managing 2-pipe or 4-pipe systems, this unit delivers the technical reliability required for modern building automation interfaces.
- Dual Modulating Outputs: Supports 0-10V or 2-10V signals for simultaneous control of heating and cooling components.
- Advanced P+I Logic: Proportional plus Integral control loop ensures precise temperature tracking without steady-state error.
- Field Configurable: On-board DIP switches allow for quick selection of scale (°F/°C), sensor source, and acting direction.
- Economy Mode Integration: Supports occupancy sensor inputs and manual overrides for enhanced energy management.
- Flexible Mounting: Compatible with standard 2x4 electrical boxes or direct wall surface mounting.
How do I configure the TE150H for single output operation?
When utilizing only a single output (AO1), DIP switches 6 and 7 must be set to the "OFF" position. It is critical to power cycle the unit after adjusting any DIP switches for the new logic to initialize.
Can this thermostat be used with remote sensors?
Yes, the TE150H supports an optional 10K Ohm Type 3 NTC thermistor. Terminals 7 and 8 are designated for external sensing, which is ideal for measuring duct air or localized zones away from the thermostat body.
What is the difference between the US and EU acting modes?
Switching between DA (Direct Acting) and RA (Reverse Acting) is vital for matching the fail-safe or operating orientation of your specific actuator. Use DIP switch 2 to toggle between these modes based on your valve’s technical requirements.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $129.15
-65%$129.15
$45.20Spartan Valves TE150H Thermostat
The Spartan Valves TE150H is a high-performance dual output modulating thermostat engineered for precise environmental control in commercial and industrial HVAC applications. Operating on a 24Vac power supply, this unit provides a versatile 0-10Vdc or 2-10Vdc signal to drive modulating valves and actuators with accuracy. Utilizing a Proportional plus Integral (P+I) control loop, the TE150H eliminates temperature offset and maintains tight setpoint stability. The high-contrast LCD display provides clear feedback on ambient temperature and system status, while the high temperature range capabilities make it suitable for specialized heating and cooling sequences, including control of electric duct heaters and multi-valve configurations.
For contractors looking for field flexibility, the Spartan TE150H thermostat includes selectable Direct Acting (DA) or Reverse Acting (RA) configurations via DIP switches. It supports external 10K NTC sensor inputs for discharge air or return air monitoring, providing a robust solution for AHUs and fan coil units. The integrated EEPROM memory ensures that all setpoints and system parameters are retained during power losses, preventing the need for site revisits. Whether managing 2-pipe or 4-pipe systems, this unit delivers the technical reliability required for modern building automation interfaces.
- Dual Modulating Outputs: Supports 0-10V or 2-10V signals for simultaneous control of heating and cooling components.
- Advanced P+I Logic: Proportional plus Integral control loop ensures precise temperature tracking without steady-state error.
- Field Configurable: On-board DIP switches allow for quick selection of scale (°F/°C), sensor source, and acting direction.
- Economy Mode Integration: Supports occupancy sensor inputs and manual overrides for enhanced energy management.
- Flexible Mounting: Compatible with standard 2x4 electrical boxes or direct wall surface mounting.
How do I configure the TE150H for single output operation?
When utilizing only a single output (AO1), DIP switches 6 and 7 must be set to the "OFF" position. It is critical to power cycle the unit after adjusting any DIP switches for the new logic to initialize.
Can this thermostat be used with remote sensors?
Yes, the TE150H supports an optional 10K Ohm Type 3 NTC thermistor. Terminals 7 and 8 are designated for external sensing, which is ideal for measuring duct air or localized zones away from the thermostat body.
What is the difference between the US and EU acting modes?
Switching between DA (Direct Acting) and RA (Reverse Acting) is vital for matching the fail-safe or operating orientation of your specific actuator. Use DIP switch 2 to toggle between these modes based on your valve’s technical requirements.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Spartan Valves TE150H is a high-performance dual output modulating thermostat engineered for precise environmental control in commercial and industrial HVAC applications. Operating on a 24Vac power supply, this unit provides a versatile 0-10Vdc or 2-10Vdc signal to drive modulating valves and actuators with accuracy. Utilizing a Proportional plus Integral (P+I) control loop, the TE150H eliminates temperature offset and maintains tight setpoint stability. The high-contrast LCD display provides clear feedback on ambient temperature and system status, while the high temperature range capabilities make it suitable for specialized heating and cooling sequences, including control of electric duct heaters and multi-valve configurations.
For contractors looking for field flexibility, the Spartan TE150H thermostat includes selectable Direct Acting (DA) or Reverse Acting (RA) configurations via DIP switches. It supports external 10K NTC sensor inputs for discharge air or return air monitoring, providing a robust solution for AHUs and fan coil units. The integrated EEPROM memory ensures that all setpoints and system parameters are retained during power losses, preventing the need for site revisits. Whether managing 2-pipe or 4-pipe systems, this unit delivers the technical reliability required for modern building automation interfaces.
- Dual Modulating Outputs: Supports 0-10V or 2-10V signals for simultaneous control of heating and cooling components.
- Advanced P+I Logic: Proportional plus Integral control loop ensures precise temperature tracking without steady-state error.
- Field Configurable: On-board DIP switches allow for quick selection of scale (°F/°C), sensor source, and acting direction.
- Economy Mode Integration: Supports occupancy sensor inputs and manual overrides for enhanced energy management.
- Flexible Mounting: Compatible with standard 2x4 electrical boxes or direct wall surface mounting.
How do I configure the TE150H for single output operation?
When utilizing only a single output (AO1), DIP switches 6 and 7 must be set to the "OFF" position. It is critical to power cycle the unit after adjusting any DIP switches for the new logic to initialize.
Can this thermostat be used with remote sensors?
Yes, the TE150H supports an optional 10K Ohm Type 3 NTC thermistor. Terminals 7 and 8 are designated for external sensing, which is ideal for measuring duct air or localized zones away from the thermostat body.
What is the difference between the US and EU acting modes?
Switching between DA (Direct Acting) and RA (Reverse Acting) is vital for matching the fail-safe or operating orientation of your specific actuator. Use DIP switch 2 to toggle between these modes based on your valve’s technical requirements.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
