Siemens Building Technology QAM1035.008P50 Commissioning Sensor
The Siemens QAM1035.008P50 is a specialized 100k Ohm thermistor sensor designed specifically for commissioning and temporary monitoring within high-efficiency HVAC control systems. This bulk 50-pack provides contractors with a cost-effective solution for large-scale commercial deployments where numerous Siemens building technology nodes require precise signal verification. Featuring an NTC (Negative Temperature Coefficient) sensing element, these units deliver high-precision resistance changes relative to temperature fluctuations, ensuring your BAS/BMS integration is calibrated accurately from the start. The commissioning sensor is engineered for quick placement and reliable feedback during the initial startup phases of air handling units and ductwork. By utilizing a high-impedance 100k Ohm sensor, the system minimizes lead wire resistance errors, which is critical when performing point-to-point checkouts in complex industrial HVAC controls environments.
- Efficient Bulk Deployment: The 50-unit pack provides a high-volume supply for major facility startups, reducing per-unit costs for HVAC contractors.
- Precise NTC Characteristics: The 100k Ohm thermistor curve is specifically matched for Siemens controllers, ensuring linear data reporting and accurate commissioning values.
- Easy Integration: Designed for seamless compatibility with standard Siemens mounting hardware and terminal blocks in commercial ductwork.
- High Resistance Values: The 100k Ohm ohmage helps mitigate signal degradation over longer cable runs during temporary testing phases.
Common Questions
Is the Siemens QAM1035.008P50 suitable for permanent outdoor installation?
These sensors are primarily designed as commissioning sensors for internal duct and air stream monitoring during the balancing and startup phase of a project.
Which controllers are compatible with this 100k Ohm thermistor?
These sensors are engineered to work with Siemens Building Technology controllers and any third-party BMS systems configured to read 100k Ohm NTC Type II or III curves.
Why use a 100k Ohm sensor instead of a standard 10k Ohm unit?
The higher resistance of the 100k Ohm element provides better resolution and is less susceptible to errors caused by the resistance of the wiring itself, which is a common pain point in large-scale commercial HVAC installs.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Siemens Building Technology QAM1035.008P50 Commissioning Sensor
The Siemens QAM1035.008P50 is a specialized 100k Ohm thermistor sensor designed specifically for commissioning and temporary monitoring within high-efficiency HVAC control systems. This bulk 50-pack provides contractors with a cost-effective solution for large-scale commercial deployments where numerous Siemens building technology nodes require precise signal verification. Featuring an NTC (Negative Temperature Coefficient) sensing element, these units deliver high-precision resistance changes relative to temperature fluctuations, ensuring your BAS/BMS integration is calibrated accurately from the start. The commissioning sensor is engineered for quick placement and reliable feedback during the initial startup phases of air handling units and ductwork. By utilizing a high-impedance 100k Ohm sensor, the system minimizes lead wire resistance errors, which is critical when performing point-to-point checkouts in complex industrial HVAC controls environments.
- Efficient Bulk Deployment: The 50-unit pack provides a high-volume supply for major facility startups, reducing per-unit costs for HVAC contractors.
- Precise NTC Characteristics: The 100k Ohm thermistor curve is specifically matched for Siemens controllers, ensuring linear data reporting and accurate commissioning values.
- Easy Integration: Designed for seamless compatibility with standard Siemens mounting hardware and terminal blocks in commercial ductwork.
- High Resistance Values: The 100k Ohm ohmage helps mitigate signal degradation over longer cable runs during temporary testing phases.
Common Questions
Is the Siemens QAM1035.008P50 suitable for permanent outdoor installation?
These sensors are primarily designed as commissioning sensors for internal duct and air stream monitoring during the balancing and startup phase of a project.
Which controllers are compatible with this 100k Ohm thermistor?
These sensors are engineered to work with Siemens Building Technology controllers and any third-party BMS systems configured to read 100k Ohm NTC Type II or III curves.
Why use a 100k Ohm sensor instead of a standard 10k Ohm unit?
The higher resistance of the 100k Ohm element provides better resolution and is less susceptible to errors caused by the resistance of the wiring itself, which is a common pain point in large-scale commercial HVAC installs.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Siemens QAM1035.008P50 is a specialized 100k Ohm thermistor sensor designed specifically for commissioning and temporary monitoring within high-efficiency HVAC control systems. This bulk 50-pack provides contractors with a cost-effective solution for large-scale commercial deployments where numerous Siemens building technology nodes require precise signal verification. Featuring an NTC (Negative Temperature Coefficient) sensing element, these units deliver high-precision resistance changes relative to temperature fluctuations, ensuring your BAS/BMS integration is calibrated accurately from the start. The commissioning sensor is engineered for quick placement and reliable feedback during the initial startup phases of air handling units and ductwork. By utilizing a high-impedance 100k Ohm sensor, the system minimizes lead wire resistance errors, which is critical when performing point-to-point checkouts in complex industrial HVAC controls environments.
- Efficient Bulk Deployment: The 50-unit pack provides a high-volume supply for major facility startups, reducing per-unit costs for HVAC contractors.
- Precise NTC Characteristics: The 100k Ohm thermistor curve is specifically matched for Siemens controllers, ensuring linear data reporting and accurate commissioning values.
- Easy Integration: Designed for seamless compatibility with standard Siemens mounting hardware and terminal blocks in commercial ductwork.
- High Resistance Values: The 100k Ohm ohmage helps mitigate signal degradation over longer cable runs during temporary testing phases.
Common Questions
Is the Siemens QAM1035.008P50 suitable for permanent outdoor installation?
These sensors are primarily designed as commissioning sensors for internal duct and air stream monitoring during the balancing and startup phase of a project.
Which controllers are compatible with this 100k Ohm thermistor?
These sensors are engineered to work with Siemens Building Technology controllers and any third-party BMS systems configured to read 100k Ohm NTC Type II or III curves.
Why use a 100k Ohm sensor instead of a standard 10k Ohm unit?
The higher resistance of the 100k Ohm element provides better resolution and is less susceptible to errors caused by the resistance of the wiring itself, which is a common pain point in large-scale commercial HVAC installs.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
