Siemens Building Technology 540-984 Sensor
The Siemens Building Technology 540-984 Sensor is a professional-grade, flush mount room temperature sensor designed specifically for environments where aesthetic discretion and high durability are paramount. Engineered for seamless integration with Siemens TALON and APOGEE building automation systems, this unit utilizes a high-precision 10K Ohm Type II NTC thermistor to provide accurate resistance output for environmental controllers. The rugged metal construction features a stainless steel cover plate, making it an ideal field solution for high-traffic or high-security areas like classrooms, offices, and industrial washdown environments where standard wall-mounted sensors are prone to damage or tampering.
From a technical standpoint, the 540-984 is built for reliable long-term performance in HVAC and BAS networks. The sensing element is secured directly to the back of the blank plate and protected by closed-cell foam insulation, which optimizes thermal isolation from the wall and ensures a more accurate indoor temperature measurement. This self-contained NTC sensor arrives with pigtail connections for rapid field termination and is designed to fit standard electrical boxes. With an operating range typically calibrated for 32°F to 122°F, this resistance-based sensor is an essential component for contractors managing commercial HVAC control systems who require a non-intrusive, tamper-resistant 10K Ohm sensing solution.
Key Benefits- Enhanced Durability: The heavy-duty metal flush-mount design provides superior protection against physical impact and unauthorized tampering in public spaces.
- High Accuracy: Integrated closed-cell foam insulation improves thermal isolation, allowing the 10K Type 2 thermistor to read actual room air temperature rather than wall temperature.
- Universal HVAC Compatibility: Works natively with most building automation controllers that accept standard 10k Ohm NTC resistance inputs.
- Aesthetic Integration: The low-profile stainless steel plate provides a clean, professional finish that blends into the architecture, ideal for high-end commercial or secure facilities.
Is the Siemens 540-984 compatible with non-Siemens controllers?
Yes, as long as the controller is configured to read a standard 10K Ohm Type II NTC thermistor curve, this sensor will function correctly across various third-party BAS platforms.
What is the best way to install this for maximum accuracy?
Ensure the sensor is mounted on an interior wall away from direct sunlight, supply air diffusers, or heat-producing equipment. Use a sealed conduit to prevent draft-induced measurement errors from within the wall cavity.
How do the pigtail connections handle field wiring?
The unit comes with pre-attached pigtails, allowing for quick wire-nut or crimp connections to your thermostat wire or six-conductor room sensor cable, simplifying retrofits and new installs alike.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Siemens Building Technology 540-984 Sensor
The Siemens Building Technology 540-984 Sensor is a professional-grade, flush mount room temperature sensor designed specifically for environments where aesthetic discretion and high durability are paramount. Engineered for seamless integration with Siemens TALON and APOGEE building automation systems, this unit utilizes a high-precision 10K Ohm Type II NTC thermistor to provide accurate resistance output for environmental controllers. The rugged metal construction features a stainless steel cover plate, making it an ideal field solution for high-traffic or high-security areas like classrooms, offices, and industrial washdown environments where standard wall-mounted sensors are prone to damage or tampering.
From a technical standpoint, the 540-984 is built for reliable long-term performance in HVAC and BAS networks. The sensing element is secured directly to the back of the blank plate and protected by closed-cell foam insulation, which optimizes thermal isolation from the wall and ensures a more accurate indoor temperature measurement. This self-contained NTC sensor arrives with pigtail connections for rapid field termination and is designed to fit standard electrical boxes. With an operating range typically calibrated for 32°F to 122°F, this resistance-based sensor is an essential component for contractors managing commercial HVAC control systems who require a non-intrusive, tamper-resistant 10K Ohm sensing solution.
Key Benefits- Enhanced Durability: The heavy-duty metal flush-mount design provides superior protection against physical impact and unauthorized tampering in public spaces.
- High Accuracy: Integrated closed-cell foam insulation improves thermal isolation, allowing the 10K Type 2 thermistor to read actual room air temperature rather than wall temperature.
- Universal HVAC Compatibility: Works natively with most building automation controllers that accept standard 10k Ohm NTC resistance inputs.
- Aesthetic Integration: The low-profile stainless steel plate provides a clean, professional finish that blends into the architecture, ideal for high-end commercial or secure facilities.
Is the Siemens 540-984 compatible with non-Siemens controllers?
Yes, as long as the controller is configured to read a standard 10K Ohm Type II NTC thermistor curve, this sensor will function correctly across various third-party BAS platforms.
What is the best way to install this for maximum accuracy?
Ensure the sensor is mounted on an interior wall away from direct sunlight, supply air diffusers, or heat-producing equipment. Use a sealed conduit to prevent draft-induced measurement errors from within the wall cavity.
How do the pigtail connections handle field wiring?
The unit comes with pre-attached pigtails, allowing for quick wire-nut or crimp connections to your thermostat wire or six-conductor room sensor cable, simplifying retrofits and new installs alike.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Siemens Building Technology 540-984 Sensor is a professional-grade, flush mount room temperature sensor designed specifically for environments where aesthetic discretion and high durability are paramount. Engineered for seamless integration with Siemens TALON and APOGEE building automation systems, this unit utilizes a high-precision 10K Ohm Type II NTC thermistor to provide accurate resistance output for environmental controllers. The rugged metal construction features a stainless steel cover plate, making it an ideal field solution for high-traffic or high-security areas like classrooms, offices, and industrial washdown environments where standard wall-mounted sensors are prone to damage or tampering.
From a technical standpoint, the 540-984 is built for reliable long-term performance in HVAC and BAS networks. The sensing element is secured directly to the back of the blank plate and protected by closed-cell foam insulation, which optimizes thermal isolation from the wall and ensures a more accurate indoor temperature measurement. This self-contained NTC sensor arrives with pigtail connections for rapid field termination and is designed to fit standard electrical boxes. With an operating range typically calibrated for 32°F to 122°F, this resistance-based sensor is an essential component for contractors managing commercial HVAC control systems who require a non-intrusive, tamper-resistant 10K Ohm sensing solution.
Key Benefits- Enhanced Durability: The heavy-duty metal flush-mount design provides superior protection against physical impact and unauthorized tampering in public spaces.
- High Accuracy: Integrated closed-cell foam insulation improves thermal isolation, allowing the 10K Type 2 thermistor to read actual room air temperature rather than wall temperature.
- Universal HVAC Compatibility: Works natively with most building automation controllers that accept standard 10k Ohm NTC resistance inputs.
- Aesthetic Integration: The low-profile stainless steel plate provides a clean, professional finish that blends into the architecture, ideal for high-end commercial or secure facilities.
Is the Siemens 540-984 compatible with non-Siemens controllers?
Yes, as long as the controller is configured to read a standard 10K Ohm Type II NTC thermistor curve, this sensor will function correctly across various third-party BAS platforms.
What is the best way to install this for maximum accuracy?
Ensure the sensor is mounted on an interior wall away from direct sunlight, supply air diffusers, or heat-producing equipment. Use a sealed conduit to prevent draft-induced measurement errors from within the wall cavity.
How do the pigtail connections handle field wiring?
The unit comes with pre-attached pigtails, allowing for quick wire-nut or crimp connections to your thermostat wire or six-conductor room sensor cable, simplifying retrofits and new installs alike.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
