Siemens Building Technology 192-759 Probe
The Siemens Building Technology 192-759 is a critical diagnostic accessory designed specifically for the Powers Controls Product Group 19X series of pneumatic room thermostats. As a veteran in the field, you know that verifying branch and main pressure without pulling the cover is the only way to ensure accurate field calibrations. This thermostat needle probe (5-pack) provides a direct interface with the control pressure test port, allowing for precision monitoring of the 0 to 30 psig (0 to 200 kPa) signal range typical of Powers 192 and 193 Series systems. These probes are engineered to work with sensitive bimetal thermostatic elements, ensuring that the proportional output signal to pneumatic valves and damper actuators is within specific calibration parameters. By utilizing these needle adapters, contractors can perform routine maintenance and sensitivity adjustments on 1-pipe or 2-pipe configurations while maintaining the integrity of the HVAC building automation system air loop.
Key Benefits- Port Compatibility: Optimized for seamless insertion into the integrated test ports of Siemens and Powers 192/193 pneumatic thermostats.
- Efficiency in Calibration: Allows for real-time pressure readings without removing the protective covers, preventing setpoint drift during testing.
- Systemwide Utility: Essential for diagnosing proportional output signals in both direct and reverse acting control sequences.
- Bulk Quantity: Supplied in a pack of 5 to ensure technicians have a reliable supply of adapters for large-scale commercial building maintenance.
Does this probe include a pressure gauge?
No, the 192-759 is a needle adapter only. It is intended to be connected to your existing field service gauge for 0-30 psi branch pressure testing.
Which thermostat series will this needle work with?
It is engineered specifically for the Siemens/Powers Product Group 19X, including the widely used 192 and 193 Series pneumatic room thermostats.
Is this required for calibration?
While you can calibrate via the internal terminal, this needle probe is the professional standard for "live" field testing through the cover port to ensure accurate sensitivity adjustments.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $84.25
-65%$84.25
$29.49Siemens Building Technology 192-759 Probe
The Siemens Building Technology 192-759 is a critical diagnostic accessory designed specifically for the Powers Controls Product Group 19X series of pneumatic room thermostats. As a veteran in the field, you know that verifying branch and main pressure without pulling the cover is the only way to ensure accurate field calibrations. This thermostat needle probe (5-pack) provides a direct interface with the control pressure test port, allowing for precision monitoring of the 0 to 30 psig (0 to 200 kPa) signal range typical of Powers 192 and 193 Series systems. These probes are engineered to work with sensitive bimetal thermostatic elements, ensuring that the proportional output signal to pneumatic valves and damper actuators is within specific calibration parameters. By utilizing these needle adapters, contractors can perform routine maintenance and sensitivity adjustments on 1-pipe or 2-pipe configurations while maintaining the integrity of the HVAC building automation system air loop.
Key Benefits- Port Compatibility: Optimized for seamless insertion into the integrated test ports of Siemens and Powers 192/193 pneumatic thermostats.
- Efficiency in Calibration: Allows for real-time pressure readings without removing the protective covers, preventing setpoint drift during testing.
- Systemwide Utility: Essential for diagnosing proportional output signals in both direct and reverse acting control sequences.
- Bulk Quantity: Supplied in a pack of 5 to ensure technicians have a reliable supply of adapters for large-scale commercial building maintenance.
Does this probe include a pressure gauge?
No, the 192-759 is a needle adapter only. It is intended to be connected to your existing field service gauge for 0-30 psi branch pressure testing.
Which thermostat series will this needle work with?
It is engineered specifically for the Siemens/Powers Product Group 19X, including the widely used 192 and 193 Series pneumatic room thermostats.
Is this required for calibration?
While you can calibrate via the internal terminal, this needle probe is the professional standard for "live" field testing through the cover port to ensure accurate sensitivity adjustments.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Siemens Building Technology 192-759 is a critical diagnostic accessory designed specifically for the Powers Controls Product Group 19X series of pneumatic room thermostats. As a veteran in the field, you know that verifying branch and main pressure without pulling the cover is the only way to ensure accurate field calibrations. This thermostat needle probe (5-pack) provides a direct interface with the control pressure test port, allowing for precision monitoring of the 0 to 30 psig (0 to 200 kPa) signal range typical of Powers 192 and 193 Series systems. These probes are engineered to work with sensitive bimetal thermostatic elements, ensuring that the proportional output signal to pneumatic valves and damper actuators is within specific calibration parameters. By utilizing these needle adapters, contractors can perform routine maintenance and sensitivity adjustments on 1-pipe or 2-pipe configurations while maintaining the integrity of the HVAC building automation system air loop.
Key Benefits- Port Compatibility: Optimized for seamless insertion into the integrated test ports of Siemens and Powers 192/193 pneumatic thermostats.
- Efficiency in Calibration: Allows for real-time pressure readings without removing the protective covers, preventing setpoint drift during testing.
- Systemwide Utility: Essential for diagnosing proportional output signals in both direct and reverse acting control sequences.
- Bulk Quantity: Supplied in a pack of 5 to ensure technicians have a reliable supply of adapters for large-scale commercial building maintenance.
Does this probe include a pressure gauge?
No, the 192-759 is a needle adapter only. It is intended to be connected to your existing field service gauge for 0-30 psi branch pressure testing.
Which thermostat series will this needle work with?
It is engineered specifically for the Siemens/Powers Product Group 19X, including the widely used 192 and 193 Series pneumatic room thermostats.
Is this required for calibration?
While you can calibrate via the internal terminal, this needle probe is the professional standard for "live" field testing through the cover port to ensure accurate sensitivity adjustments.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
