Shipco Pumps SDPC00218 Shaft Sleeve and O-Ring
The Shipco Pumps SDPC00218 Shaft Sleeve and O-Ring is a critical OEM replacement assembly designed to protect the pump shaft from abrasive wear and chemical degradation in demanding HVACR and industrial fluid systems. Engineered from lead-free bronze, this 1.125-inch shaft sleeve acts as a sacrificial barrier, preserving the integrity of the motor shaft against the dynamic friction of the mechanical seal and potential pitting from corrosive condensates. The inclusion of a precision-fit EPR O-ring ensures a secondary static seal, preventing fluid migration along the shaft that could lead to premature bearing failure or motor damage.
This shaft sleeve is specifically balanced for use in Shipco condensate return units and boiler feed systems, including the Model 110-D and Model 114-D series. By utilizing Shipco genuine parts, technicians ensure a precision-engineered fit that maintains the factory-specified clearances required for optimal pump hydraulics. Replacing a worn or grooved sleeve during a standard pump rebuild is vital for preventing nuisance leaks and extending the service life of the centrifugal pump assembly.
- Corrosion Resistance: Heavy-duty lead-free bronze construction offers superior durability in high-temperature condensate return applications.
- Shaft Protection: Shields the expensive motor shaft from mechanical seal wear and fluid-induced erosion.
- Leak Prevention: High-grade EPR O-ring provides a reliable, pressure-tight barrier to prevent bypass leakage.
- Exact Compatibility: Designed for seamless integration with Shipco Model D and Model V pump frames, ensuring straightforward installation.
- System Reliability: Minimizes maintenance intervals and reduces the risk of unexpected downtime in HVAC pump systems.
Common Questions
When should a Shipco shaft sleeve be replaced?
Inspect the sleeve every time the mechanical seal is serviced. If you detect visible grooving, pitting, or scoring on the outer surface, the SDPC00218 must be replaced to provide a smooth sealing surface for the new seal. Failure to replace a damaged sleeve will cause the new seal to fail prematurely.
Is the O-ring included with the sleeve?
Yes, this assembly includes both the bronze shaft sleeve and the necessary EPR O-ring required for a complete installation, ensuring the seal between the shaft and the sleeve is watertight.
What is the ID and OD of this sleeve?
The Shipco SDPC00218 is designed for a 1.000-inch inside diameter to fit the shaft, with a 1.125-inch outside diameter to accommodate standard 1-1/8" mechanical seals.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Shipco Pumps SDPC00218 Shaft Sleeve and O-Ring
The Shipco Pumps SDPC00218 Shaft Sleeve and O-Ring is a critical OEM replacement assembly designed to protect the pump shaft from abrasive wear and chemical degradation in demanding HVACR and industrial fluid systems. Engineered from lead-free bronze, this 1.125-inch shaft sleeve acts as a sacrificial barrier, preserving the integrity of the motor shaft against the dynamic friction of the mechanical seal and potential pitting from corrosive condensates. The inclusion of a precision-fit EPR O-ring ensures a secondary static seal, preventing fluid migration along the shaft that could lead to premature bearing failure or motor damage.
This shaft sleeve is specifically balanced for use in Shipco condensate return units and boiler feed systems, including the Model 110-D and Model 114-D series. By utilizing Shipco genuine parts, technicians ensure a precision-engineered fit that maintains the factory-specified clearances required for optimal pump hydraulics. Replacing a worn or grooved sleeve during a standard pump rebuild is vital for preventing nuisance leaks and extending the service life of the centrifugal pump assembly.
- Corrosion Resistance: Heavy-duty lead-free bronze construction offers superior durability in high-temperature condensate return applications.
- Shaft Protection: Shields the expensive motor shaft from mechanical seal wear and fluid-induced erosion.
- Leak Prevention: High-grade EPR O-ring provides a reliable, pressure-tight barrier to prevent bypass leakage.
- Exact Compatibility: Designed for seamless integration with Shipco Model D and Model V pump frames, ensuring straightforward installation.
- System Reliability: Minimizes maintenance intervals and reduces the risk of unexpected downtime in HVAC pump systems.
Common Questions
When should a Shipco shaft sleeve be replaced?
Inspect the sleeve every time the mechanical seal is serviced. If you detect visible grooving, pitting, or scoring on the outer surface, the SDPC00218 must be replaced to provide a smooth sealing surface for the new seal. Failure to replace a damaged sleeve will cause the new seal to fail prematurely.
Is the O-ring included with the sleeve?
Yes, this assembly includes both the bronze shaft sleeve and the necessary EPR O-ring required for a complete installation, ensuring the seal between the shaft and the sleeve is watertight.
What is the ID and OD of this sleeve?
The Shipco SDPC00218 is designed for a 1.000-inch inside diameter to fit the shaft, with a 1.125-inch outside diameter to accommodate standard 1-1/8" mechanical seals.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Shipco Pumps SDPC00218 Shaft Sleeve and O-Ring is a critical OEM replacement assembly designed to protect the pump shaft from abrasive wear and chemical degradation in demanding HVACR and industrial fluid systems. Engineered from lead-free bronze, this 1.125-inch shaft sleeve acts as a sacrificial barrier, preserving the integrity of the motor shaft against the dynamic friction of the mechanical seal and potential pitting from corrosive condensates. The inclusion of a precision-fit EPR O-ring ensures a secondary static seal, preventing fluid migration along the shaft that could lead to premature bearing failure or motor damage.
This shaft sleeve is specifically balanced for use in Shipco condensate return units and boiler feed systems, including the Model 110-D and Model 114-D series. By utilizing Shipco genuine parts, technicians ensure a precision-engineered fit that maintains the factory-specified clearances required for optimal pump hydraulics. Replacing a worn or grooved sleeve during a standard pump rebuild is vital for preventing nuisance leaks and extending the service life of the centrifugal pump assembly.
- Corrosion Resistance: Heavy-duty lead-free bronze construction offers superior durability in high-temperature condensate return applications.
- Shaft Protection: Shields the expensive motor shaft from mechanical seal wear and fluid-induced erosion.
- Leak Prevention: High-grade EPR O-ring provides a reliable, pressure-tight barrier to prevent bypass leakage.
- Exact Compatibility: Designed for seamless integration with Shipco Model D and Model V pump frames, ensuring straightforward installation.
- System Reliability: Minimizes maintenance intervals and reduces the risk of unexpected downtime in HVAC pump systems.
Common Questions
When should a Shipco shaft sleeve be replaced?
Inspect the sleeve every time the mechanical seal is serviced. If you detect visible grooving, pitting, or scoring on the outer surface, the SDPC00218 must be replaced to provide a smooth sealing surface for the new seal. Failure to replace a damaged sleeve will cause the new seal to fail prematurely.
Is the O-ring included with the sleeve?
Yes, this assembly includes both the bronze shaft sleeve and the necessary EPR O-ring required for a complete installation, ensuring the seal between the shaft and the sleeve is watertight.
What is the ID and OD of this sleeve?
The Shipco SDPC00218 is designed for a 1.000-inch inside diameter to fit the shaft, with a 1.125-inch outside diameter to accommodate standard 1-1/8" mechanical seals.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
