Secop Diversitech 117-7053 Starting Device
The Secop Diversitech 117-7053 Starting Device is a professional-grade electrical component engineered for commercial refrigeration compressors, specifically those utilizing CSIR (Capacitor Start Induction Run) motor configurations. This high-performance compressor start relay is designed to handle the rigorous torque requirements of heavy-duty cooling cycles, ensuring precise motor engagement even under significant thermal loads. Often used as a direct replacement for Danfoss SC series starting devices, the 117-7053 features a 0.6m flex cable and a 1/4-inch spade connection for secure technical integration. By replacing aging centrifugal switches with this specialized interface, technicians can optimize compressor starting torque and shield motor windings from the damaging current inrushes typical of industrial startups. Whether you are troubleshooting a refrigeration compressor not starting or performing scheduled maintenance on fractional horsepower units, this starting relay provides the industrial-strength switching needed to prevent premature motor failure and maintain system uptime in demanding HVACR environments.
Key Technical Benefits
- High-Torque Optimization: Hardwired for CSIR electrical systems to provide the immediate current surge required to overcome high head pressures.
- OEM Engineering: Designed for seamless compatibility with Secop and Danfoss SC compressors, featuring a 0.6m cable for flexible installation.
- Industrial Build Quality: Constructed to endure the high-frequency switching cycles found in commercial kitchens, labs, and industrial chillers.
- Voltage Stability: Serves as a dedicated power relay for compressors, protecting internal components during voltage fluctuations and rapid cycling.
- Precise Fitting: Standardized 1/4-inch spade terminals ensure a low-resistance electrical connection for reliable long-term service.
Common Technical Questions
Is the 117-7053 compatible with PSC or CSCR motors?
No. This device is strictly engineered for CSIR configurations. Attempting to install this on a Permanent Split Capacitor or Capacitor Start Capacitor Run motor will lead to electrical mismatch and immediate component damage.
How do I confirm if this starter fits my specific compressor?
Consult the compressor’s technical data plate. This unit is the standard starting device code 117-7053 for many Secop/Danfoss S-Series and G-Series fractional horsepower platforms.
Does this unit require a start capacitor for operation?
Yes. As a CSIR starting device, it must be paired with a properly rated start capacitor to create the necessary phase shift for motor rotation. Always match the microfarad rating to the manufacturer's specification.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $110.11
-65%$110.11
$38.54Secop Diversitech 117-7053 Starting Device
The Secop Diversitech 117-7053 Starting Device is a professional-grade electrical component engineered for commercial refrigeration compressors, specifically those utilizing CSIR (Capacitor Start Induction Run) motor configurations. This high-performance compressor start relay is designed to handle the rigorous torque requirements of heavy-duty cooling cycles, ensuring precise motor engagement even under significant thermal loads. Often used as a direct replacement for Danfoss SC series starting devices, the 117-7053 features a 0.6m flex cable and a 1/4-inch spade connection for secure technical integration. By replacing aging centrifugal switches with this specialized interface, technicians can optimize compressor starting torque and shield motor windings from the damaging current inrushes typical of industrial startups. Whether you are troubleshooting a refrigeration compressor not starting or performing scheduled maintenance on fractional horsepower units, this starting relay provides the industrial-strength switching needed to prevent premature motor failure and maintain system uptime in demanding HVACR environments.
Key Technical Benefits
- High-Torque Optimization: Hardwired for CSIR electrical systems to provide the immediate current surge required to overcome high head pressures.
- OEM Engineering: Designed for seamless compatibility with Secop and Danfoss SC compressors, featuring a 0.6m cable for flexible installation.
- Industrial Build Quality: Constructed to endure the high-frequency switching cycles found in commercial kitchens, labs, and industrial chillers.
- Voltage Stability: Serves as a dedicated power relay for compressors, protecting internal components during voltage fluctuations and rapid cycling.
- Precise Fitting: Standardized 1/4-inch spade terminals ensure a low-resistance electrical connection for reliable long-term service.
Common Technical Questions
Is the 117-7053 compatible with PSC or CSCR motors?
No. This device is strictly engineered for CSIR configurations. Attempting to install this on a Permanent Split Capacitor or Capacitor Start Capacitor Run motor will lead to electrical mismatch and immediate component damage.
How do I confirm if this starter fits my specific compressor?
Consult the compressor’s technical data plate. This unit is the standard starting device code 117-7053 for many Secop/Danfoss S-Series and G-Series fractional horsepower platforms.
Does this unit require a start capacitor for operation?
Yes. As a CSIR starting device, it must be paired with a properly rated start capacitor to create the necessary phase shift for motor rotation. Always match the microfarad rating to the manufacturer's specification.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Secop Diversitech 117-7053 Starting Device is a professional-grade electrical component engineered for commercial refrigeration compressors, specifically those utilizing CSIR (Capacitor Start Induction Run) motor configurations. This high-performance compressor start relay is designed to handle the rigorous torque requirements of heavy-duty cooling cycles, ensuring precise motor engagement even under significant thermal loads. Often used as a direct replacement for Danfoss SC series starting devices, the 117-7053 features a 0.6m flex cable and a 1/4-inch spade connection for secure technical integration. By replacing aging centrifugal switches with this specialized interface, technicians can optimize compressor starting torque and shield motor windings from the damaging current inrushes typical of industrial startups. Whether you are troubleshooting a refrigeration compressor not starting or performing scheduled maintenance on fractional horsepower units, this starting relay provides the industrial-strength switching needed to prevent premature motor failure and maintain system uptime in demanding HVACR environments.
Key Technical Benefits
- High-Torque Optimization: Hardwired for CSIR electrical systems to provide the immediate current surge required to overcome high head pressures.
- OEM Engineering: Designed for seamless compatibility with Secop and Danfoss SC compressors, featuring a 0.6m cable for flexible installation.
- Industrial Build Quality: Constructed to endure the high-frequency switching cycles found in commercial kitchens, labs, and industrial chillers.
- Voltage Stability: Serves as a dedicated power relay for compressors, protecting internal components during voltage fluctuations and rapid cycling.
- Precise Fitting: Standardized 1/4-inch spade terminals ensure a low-resistance electrical connection for reliable long-term service.
Common Technical Questions
Is the 117-7053 compatible with PSC or CSCR motors?
No. This device is strictly engineered for CSIR configurations. Attempting to install this on a Permanent Split Capacitor or Capacitor Start Capacitor Run motor will lead to electrical mismatch and immediate component damage.
How do I confirm if this starter fits my specific compressor?
Consult the compressor’s technical data plate. This unit is the standard starting device code 117-7053 for many Secop/Danfoss S-Series and G-Series fractional horsepower platforms.
Does this unit require a start capacitor for operation?
Yes. As a CSIR starting device, it must be paired with a properly rated start capacitor to create the necessary phase shift for motor rotation. Always match the microfarad rating to the manufacturer's specification.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
