Sanhua International SHF(L)-7H-34 Valve
The Sanhua International SHF(L)-7H-34 is a professional-grade 4-way reversing valve engineered to facilitate the refrigeration cycle switch between heating and cooling modes in residential and light commercial heat pumps. This unit features a 3/8" Tube connection on the discharge side and 1/2" ESC (Suction/Board) connections, specifically optimized for high-pressure R410A systems but remaining compatible with R22, R134a, and R407C refrigerants. Its improved pilot valve design minimizes pressure drops and prevents system recoil, ensuring stable refrigerant flow control even under extreme ambient conditions. As a critical component for 2 to 2.5-ton capacity units, this valve is built for reliable seating and switching, reducing the risk of internal bypass leakage. For technicians performing heat pump reversing valve replacement, the ODF solder connections allow for a secure fit in various piping configurations. This genuine OEM HVAC part ensures your system maintains its high-efficiency HVAC performance by managing the redirection of hot gas with precision.
Key Benefits- Broad Refrigerant Compatibility: Fully rated for R410A, R22, R407C, and R134a, providing versatility for various field service needs.
- Enhanced Pilot System: Features an improved pilot valve design that increases switching reliability and reduces vibration-induced fatigue.
- Optimized Pressure Handling: Rated for a maximum operating pressure (MOP) of 650 psig, suitable for modern high-pressure environments.
- Precision Porting: The 3/8 inch by 1/2 inch ODF solder connections ensure proper flow velocity and minimal pressure loss during cycle changeover.
Is the coil included with this valve body?
This is the SHF(L)-7H-34 valve body only. The solenoid coil required for electronic actuation must be ordered separately based on your specific voltage requirements (typically 24V or 120V/240V).
What is the maximum capacity for this specific model?
The SHF series "7" frame is generally rated for systems with nominal cooling capacities between 1.5 and 2.5 tons, depending on the refrigerant and specific operating conditions.
Can this valve be installed in any orientation?
For optimal performance, the valve should be installed with the coil in an upward or horizontal position. Always ensure the flow direction matches the internal pilot markings to avoid mechanical failure.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $34.11
-65%$34.11
$11.94Sanhua International SHF(L)-7H-34 Valve
The Sanhua International SHF(L)-7H-34 is a professional-grade 4-way reversing valve engineered to facilitate the refrigeration cycle switch between heating and cooling modes in residential and light commercial heat pumps. This unit features a 3/8" Tube connection on the discharge side and 1/2" ESC (Suction/Board) connections, specifically optimized for high-pressure R410A systems but remaining compatible with R22, R134a, and R407C refrigerants. Its improved pilot valve design minimizes pressure drops and prevents system recoil, ensuring stable refrigerant flow control even under extreme ambient conditions. As a critical component for 2 to 2.5-ton capacity units, this valve is built for reliable seating and switching, reducing the risk of internal bypass leakage. For technicians performing heat pump reversing valve replacement, the ODF solder connections allow for a secure fit in various piping configurations. This genuine OEM HVAC part ensures your system maintains its high-efficiency HVAC performance by managing the redirection of hot gas with precision.
Key Benefits- Broad Refrigerant Compatibility: Fully rated for R410A, R22, R407C, and R134a, providing versatility for various field service needs.
- Enhanced Pilot System: Features an improved pilot valve design that increases switching reliability and reduces vibration-induced fatigue.
- Optimized Pressure Handling: Rated for a maximum operating pressure (MOP) of 650 psig, suitable for modern high-pressure environments.
- Precision Porting: The 3/8 inch by 1/2 inch ODF solder connections ensure proper flow velocity and minimal pressure loss during cycle changeover.
Is the coil included with this valve body?
This is the SHF(L)-7H-34 valve body only. The solenoid coil required for electronic actuation must be ordered separately based on your specific voltage requirements (typically 24V or 120V/240V).
What is the maximum capacity for this specific model?
The SHF series "7" frame is generally rated for systems with nominal cooling capacities between 1.5 and 2.5 tons, depending on the refrigerant and specific operating conditions.
Can this valve be installed in any orientation?
For optimal performance, the valve should be installed with the coil in an upward or horizontal position. Always ensure the flow direction matches the internal pilot markings to avoid mechanical failure.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Sanhua International SHF(L)-7H-34 is a professional-grade 4-way reversing valve engineered to facilitate the refrigeration cycle switch between heating and cooling modes in residential and light commercial heat pumps. This unit features a 3/8" Tube connection on the discharge side and 1/2" ESC (Suction/Board) connections, specifically optimized for high-pressure R410A systems but remaining compatible with R22, R134a, and R407C refrigerants. Its improved pilot valve design minimizes pressure drops and prevents system recoil, ensuring stable refrigerant flow control even under extreme ambient conditions. As a critical component for 2 to 2.5-ton capacity units, this valve is built for reliable seating and switching, reducing the risk of internal bypass leakage. For technicians performing heat pump reversing valve replacement, the ODF solder connections allow for a secure fit in various piping configurations. This genuine OEM HVAC part ensures your system maintains its high-efficiency HVAC performance by managing the redirection of hot gas with precision.
Key Benefits- Broad Refrigerant Compatibility: Fully rated for R410A, R22, R407C, and R134a, providing versatility for various field service needs.
- Enhanced Pilot System: Features an improved pilot valve design that increases switching reliability and reduces vibration-induced fatigue.
- Optimized Pressure Handling: Rated for a maximum operating pressure (MOP) of 650 psig, suitable for modern high-pressure environments.
- Precision Porting: The 3/8 inch by 1/2 inch ODF solder connections ensure proper flow velocity and minimal pressure loss during cycle changeover.
Is the coil included with this valve body?
This is the SHF(L)-7H-34 valve body only. The solenoid coil required for electronic actuation must be ordered separately based on your specific voltage requirements (typically 24V or 120V/240V).
What is the maximum capacity for this specific model?
The SHF series "7" frame is generally rated for systems with nominal cooling capacities between 1.5 and 2.5 tons, depending on the refrigerant and specific operating conditions.
Can this valve be installed in any orientation?
For optimal performance, the valve should be installed with the coil in an upward or horizontal position. Always ensure the flow direction matches the internal pilot markings to avoid mechanical failure.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
