Rollway Bearings 6208ZZEMQ Bearing
The Rollway Bearings 6208ZZEMQ Bearing is a professional-grade, deep groove ball bearing engineered specifically for high-efficiency electric motors and HVACR applications. Featuring a 40mm bore (ID), 80mm OD, and 18mm width, this unit is the direct technical replacement for 6208-2Z. As an EMQ (Electric Motor Quality) rated component, it is manufactured to tighter vibration and noise tolerances than standard industrial bearings, ensuring stable performance in air handlers, pumps, and condenser fan motors. The double shielded (ZZ) design utilizes non-contact metal shields to retain factory-grade grease while protecting the internal raceways from large particulate ingress without increasing rotational torque.
Built with high-carbon 52100 bearing steel, the 6208ZZEMQ handles both radial and axial loads across a wide temperature range. For contractors performing motor teardowns or blower assembly overhauls, the Rollway 6208ZZEMQ provides the dimensional precision required for a press-fit installation on standard 40mm shafts, effectively reducing heat generation and extending the operational life of the drive system.
Key Benefits
- Electric Motor Quality (EMQ): Specifically honed raceways reduce harmonic vibration and noise, critical for residential and commercial HVAC systems.
- Maintenance-Free Shielding: Dual metal shields (ZZ) provide effective protection against debris while maintaining low-friction operation.
- High-Speed Stability: Optimized internal geometry supports high RPM requirements typical of modern high-efficiency motors.
- Universal Compatibility: Standard metric dimensions (40x80x18mm) ensure a seamless interchange with any 6208-2Z or 6208ZZ configuration.
Common Questions
What is the difference between 6208ZZEMQ and a standard 6208ZZ?
While dimensions are identical, the EMQ suffix signifies Electric Motor Quality. These bearings undergo additional testing and manufacturing refinements to ensure lower noise and vibration levels, making them the preferred choice for motor applications where quiet operation is required.
Can the metal shields be removed for relubrication?
While shields are technically removable with a pick, these units are factory-lubricated for life. Removing the shields can compromise the seal integrity and introduce contaminants, so they should be installed as-is for maximum reliability.
Is this bearing suitable for vertical shaft orientations?
Yes, the deep groove design allows for moderate thrust (axial) loads in addition to primary radial loads, making it compatible with both horizontal and vertical motor mounting positions.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $15.98
-65%$15.98
$5.59Rollway Bearings 6208ZZEMQ Bearing
The Rollway Bearings 6208ZZEMQ Bearing is a professional-grade, deep groove ball bearing engineered specifically for high-efficiency electric motors and HVACR applications. Featuring a 40mm bore (ID), 80mm OD, and 18mm width, this unit is the direct technical replacement for 6208-2Z. As an EMQ (Electric Motor Quality) rated component, it is manufactured to tighter vibration and noise tolerances than standard industrial bearings, ensuring stable performance in air handlers, pumps, and condenser fan motors. The double shielded (ZZ) design utilizes non-contact metal shields to retain factory-grade grease while protecting the internal raceways from large particulate ingress without increasing rotational torque.
Built with high-carbon 52100 bearing steel, the 6208ZZEMQ handles both radial and axial loads across a wide temperature range. For contractors performing motor teardowns or blower assembly overhauls, the Rollway 6208ZZEMQ provides the dimensional precision required for a press-fit installation on standard 40mm shafts, effectively reducing heat generation and extending the operational life of the drive system.
Key Benefits
- Electric Motor Quality (EMQ): Specifically honed raceways reduce harmonic vibration and noise, critical for residential and commercial HVAC systems.
- Maintenance-Free Shielding: Dual metal shields (ZZ) provide effective protection against debris while maintaining low-friction operation.
- High-Speed Stability: Optimized internal geometry supports high RPM requirements typical of modern high-efficiency motors.
- Universal Compatibility: Standard metric dimensions (40x80x18mm) ensure a seamless interchange with any 6208-2Z or 6208ZZ configuration.
Common Questions
What is the difference between 6208ZZEMQ and a standard 6208ZZ?
While dimensions are identical, the EMQ suffix signifies Electric Motor Quality. These bearings undergo additional testing and manufacturing refinements to ensure lower noise and vibration levels, making them the preferred choice for motor applications where quiet operation is required.
Can the metal shields be removed for relubrication?
While shields are technically removable with a pick, these units are factory-lubricated for life. Removing the shields can compromise the seal integrity and introduce contaminants, so they should be installed as-is for maximum reliability.
Is this bearing suitable for vertical shaft orientations?
Yes, the deep groove design allows for moderate thrust (axial) loads in addition to primary radial loads, making it compatible with both horizontal and vertical motor mounting positions.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Rollway Bearings 6208ZZEMQ Bearing is a professional-grade, deep groove ball bearing engineered specifically for high-efficiency electric motors and HVACR applications. Featuring a 40mm bore (ID), 80mm OD, and 18mm width, this unit is the direct technical replacement for 6208-2Z. As an EMQ (Electric Motor Quality) rated component, it is manufactured to tighter vibration and noise tolerances than standard industrial bearings, ensuring stable performance in air handlers, pumps, and condenser fan motors. The double shielded (ZZ) design utilizes non-contact metal shields to retain factory-grade grease while protecting the internal raceways from large particulate ingress without increasing rotational torque.
Built with high-carbon 52100 bearing steel, the 6208ZZEMQ handles both radial and axial loads across a wide temperature range. For contractors performing motor teardowns or blower assembly overhauls, the Rollway 6208ZZEMQ provides the dimensional precision required for a press-fit installation on standard 40mm shafts, effectively reducing heat generation and extending the operational life of the drive system.
Key Benefits
- Electric Motor Quality (EMQ): Specifically honed raceways reduce harmonic vibration and noise, critical for residential and commercial HVAC systems.
- Maintenance-Free Shielding: Dual metal shields (ZZ) provide effective protection against debris while maintaining low-friction operation.
- High-Speed Stability: Optimized internal geometry supports high RPM requirements typical of modern high-efficiency motors.
- Universal Compatibility: Standard metric dimensions (40x80x18mm) ensure a seamless interchange with any 6208-2Z or 6208ZZ configuration.
Common Questions
What is the difference between 6208ZZEMQ and a standard 6208ZZ?
While dimensions are identical, the EMQ suffix signifies Electric Motor Quality. These bearings undergo additional testing and manufacturing refinements to ensure lower noise and vibration levels, making them the preferred choice for motor applications where quiet operation is required.
Can the metal shields be removed for relubrication?
While shields are technically removable with a pick, these units are factory-lubricated for life. Removing the shields can compromise the seal integrity and introduce contaminants, so they should be installed as-is for maximum reliability.
Is this bearing suitable for vertical shaft orientations?
Yes, the deep groove design allows for moderate thrust (axial) loads in addition to primary radial loads, making it compatible with both horizontal and vertical motor mounting positions.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
