Robertshaw 3002 Remote Thermostat
The Robertshaw 3002 Remote Thermostat is a critical OEM temperature control component, specifically engineered as the direct replacement for the legacy Robertshaw 3301. This non-programmable 24VAC remote unit is built to manage complex heating and cooling loads in commercial, industrial, and high-end residential HVAC/R environments. As a veteran-grade Robertshaw 3002 replacement, it eliminates the drift associated with older mechanical anticipators by utilizing 100% solid-state circuitry for precise temperature regulation.
Designed for versatile integration, the Robertshaw 3002 serves as a reliable HVAC thermostat for furnaces, refrigeration units, and multi-stage systems. It features a robust terminal bus (R, 24V, 24V(c), W1, Y1, G) and supports advanced remote-mounted thermostat configurations via the RS1, RS2, and RS+V terminals. This allows for indoor or outdoor sensing, essential for managing heat pump balance points or dual-fuel transitions. The Robertshaw 3002 controller also includes field-adjustable DIP switches for 2 or 4-minute short-cycle protection and keypad lockout functionality to prevent unauthorized setpoint tampering in public or commercial spaces.
Key Benefits for the Contractor:
- Direct Compatibility: Drop-in OEM replacement for the Robertshaw 3301 and older 300-series non-programmable units.
- Advanced Sensing: Remote sensor bus supports up to 6 indoor units or 1 outdoor sensor for accurate temperature control solutions.
- Broad Operating Range: Wide heating (38°F to 88°F) and cooling (60°F to 108°F) setpoint ranges suited for diverse climate demands.
- Industrial Durability: Solid-state design with 0.050 to 3.0 Amp surge capacity handles demanding contactor and relay loads.
- Field Customization: On-board DIP switches allow for instant configuration of fan delays, staging, and display icons (Filter/Fault).
Common Questions:
Is the Robertshaw 3002 compatible with millivolt systems?
Yes, this model is designed for 24VAC systems but is often used in millivolt heating-only applications where remote sensing is required, though standard 24VAC power is typically needed for the display and logic.
How do I calibrate the temperature on the 3002?
Calibration is straightforward for technicians: press and hold the FAN button for 10 seconds to enter offset mode, allowing you to align the internal or remote sensor with your master thermometer.
Can I use this to replace a 3301 fireplace remote?
Yes, the 3002 is the designated high-reliability replacement for the 3301, maintaining the same mounting footprint and wiring configuration for fireplace and HVAC applications.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Robertshaw 3002 Remote Thermostat
The Robertshaw 3002 Remote Thermostat is a critical OEM temperature control component, specifically engineered as the direct replacement for the legacy Robertshaw 3301. This non-programmable 24VAC remote unit is built to manage complex heating and cooling loads in commercial, industrial, and high-end residential HVAC/R environments. As a veteran-grade Robertshaw 3002 replacement, it eliminates the drift associated with older mechanical anticipators by utilizing 100% solid-state circuitry for precise temperature regulation.
Designed for versatile integration, the Robertshaw 3002 serves as a reliable HVAC thermostat for furnaces, refrigeration units, and multi-stage systems. It features a robust terminal bus (R, 24V, 24V(c), W1, Y1, G) and supports advanced remote-mounted thermostat configurations via the RS1, RS2, and RS+V terminals. This allows for indoor or outdoor sensing, essential for managing heat pump balance points or dual-fuel transitions. The Robertshaw 3002 controller also includes field-adjustable DIP switches for 2 or 4-minute short-cycle protection and keypad lockout functionality to prevent unauthorized setpoint tampering in public or commercial spaces.
Key Benefits for the Contractor:
- Direct Compatibility: Drop-in OEM replacement for the Robertshaw 3301 and older 300-series non-programmable units.
- Advanced Sensing: Remote sensor bus supports up to 6 indoor units or 1 outdoor sensor for accurate temperature control solutions.
- Broad Operating Range: Wide heating (38°F to 88°F) and cooling (60°F to 108°F) setpoint ranges suited for diverse climate demands.
- Industrial Durability: Solid-state design with 0.050 to 3.0 Amp surge capacity handles demanding contactor and relay loads.
- Field Customization: On-board DIP switches allow for instant configuration of fan delays, staging, and display icons (Filter/Fault).
Common Questions:
Is the Robertshaw 3002 compatible with millivolt systems?
Yes, this model is designed for 24VAC systems but is often used in millivolt heating-only applications where remote sensing is required, though standard 24VAC power is typically needed for the display and logic.
How do I calibrate the temperature on the 3002?
Calibration is straightforward for technicians: press and hold the FAN button for 10 seconds to enter offset mode, allowing you to align the internal or remote sensor with your master thermometer.
Can I use this to replace a 3301 fireplace remote?
Yes, the 3002 is the designated high-reliability replacement for the 3301, maintaining the same mounting footprint and wiring configuration for fireplace and HVAC applications.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Robertshaw 3002 Remote Thermostat is a critical OEM temperature control component, specifically engineered as the direct replacement for the legacy Robertshaw 3301. This non-programmable 24VAC remote unit is built to manage complex heating and cooling loads in commercial, industrial, and high-end residential HVAC/R environments. As a veteran-grade Robertshaw 3002 replacement, it eliminates the drift associated with older mechanical anticipators by utilizing 100% solid-state circuitry for precise temperature regulation.
Designed for versatile integration, the Robertshaw 3002 serves as a reliable HVAC thermostat for furnaces, refrigeration units, and multi-stage systems. It features a robust terminal bus (R, 24V, 24V(c), W1, Y1, G) and supports advanced remote-mounted thermostat configurations via the RS1, RS2, and RS+V terminals. This allows for indoor or outdoor sensing, essential for managing heat pump balance points or dual-fuel transitions. The Robertshaw 3002 controller also includes field-adjustable DIP switches for 2 or 4-minute short-cycle protection and keypad lockout functionality to prevent unauthorized setpoint tampering in public or commercial spaces.
Key Benefits for the Contractor:
- Direct Compatibility: Drop-in OEM replacement for the Robertshaw 3301 and older 300-series non-programmable units.
- Advanced Sensing: Remote sensor bus supports up to 6 indoor units or 1 outdoor sensor for accurate temperature control solutions.
- Broad Operating Range: Wide heating (38°F to 88°F) and cooling (60°F to 108°F) setpoint ranges suited for diverse climate demands.
- Industrial Durability: Solid-state design with 0.050 to 3.0 Amp surge capacity handles demanding contactor and relay loads.
- Field Customization: On-board DIP switches allow for instant configuration of fan delays, staging, and display icons (Filter/Fault).
Common Questions:
Is the Robertshaw 3002 compatible with millivolt systems?
Yes, this model is designed for 24VAC systems but is often used in millivolt heating-only applications where remote sensing is required, though standard 24VAC power is typically needed for the display and logic.
How do I calibrate the temperature on the 3002?
Calibration is straightforward for technicians: press and hold the FAN button for 10 seconds to enter offset mode, allowing you to align the internal or remote sensor with your master thermometer.
Can I use this to replace a 3301 fireplace remote?
Yes, the 3002 is the designated high-reliability replacement for the 3301, maintaining the same mounting footprint and wiring configuration for fireplace and HVAC applications.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
