Robertshaw 10-227 Sensor
When you're troubleshooting ignition sequence failures in gas-fired equipment, the Robertshaw 10-227 Sensor is a reliable solution for restoring proper flame rectification signals to the control board. This S1 replacement sensor is built with high-performance Kanthol sensor rods capable of withstanding extreme combustion environments up to 1800°F (982°C). Designed for wide compatibility across central furnaces and commercial boilers, it features a 1/4" quick connect terminal for a secure, low-resistance electrical pathway.
For field versatility, the 4-inch rod of this commercial flame sensor can be carefully bent or cut to match the specific geometry of the original OEM part. To ensure thermal integrity, the assembly includes 30 inches of Teflon insulated lead wire rated for 482°F (250°C), preventing wire degrade near the burner manifold. Whether you are performing a routine preventative maintenance check or an emergency furnace flame sensor replacement, the Robertshaw 10-227 offers the precision required for safe and consistent pilot or main burner detection.
Key Benefits:- High-temperature Kanthol sensor rod maintains structural integrity in environments up to 1800°F.
- Features a standard 1/4" QC (Quick Connect) for seamless integration with existing wiring harnesses.
- Includes 30" Teflon insulated lead wire, providing superior resistance to heat and chemical degradation.
- Versatile 4" rod length allows for custom field adjustments to fit various S1 style sensor applications.
- Direct replacement compatibility for multiple gas-fired appliance brands, reducing truck stock requirements.
How do I know if the Robertshaw 10-227 is compatible with my specific furnace model?
This is an S1-style universal replacement. As long as your system uses a 1/4" quick connect and the rod can be positioned within the flame path, it should function correctly. Always verify the microamp signal at the control board after installation.
Can the sensor rod be adjusted if the alignment is off?
Yes, the rod is designed to be bent or cut to match the original profile. Use caution to ensure the rod does not ground out against the burner or manifold during the adjustment.
What causes this sensor to fail in the field?
Carbon buildup or "sooting" is the most common cause of poor signal. While cleaning can temporarily restore function, pitting on the rod surface often necessitates a full 10-227 replacement to ensure reliable ion sensing.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $15.86
-65%$15.86
$5.55Robertshaw 10-227 Sensor
When you're troubleshooting ignition sequence failures in gas-fired equipment, the Robertshaw 10-227 Sensor is a reliable solution for restoring proper flame rectification signals to the control board. This S1 replacement sensor is built with high-performance Kanthol sensor rods capable of withstanding extreme combustion environments up to 1800°F (982°C). Designed for wide compatibility across central furnaces and commercial boilers, it features a 1/4" quick connect terminal for a secure, low-resistance electrical pathway.
For field versatility, the 4-inch rod of this commercial flame sensor can be carefully bent or cut to match the specific geometry of the original OEM part. To ensure thermal integrity, the assembly includes 30 inches of Teflon insulated lead wire rated for 482°F (250°C), preventing wire degrade near the burner manifold. Whether you are performing a routine preventative maintenance check or an emergency furnace flame sensor replacement, the Robertshaw 10-227 offers the precision required for safe and consistent pilot or main burner detection.
Key Benefits:- High-temperature Kanthol sensor rod maintains structural integrity in environments up to 1800°F.
- Features a standard 1/4" QC (Quick Connect) for seamless integration with existing wiring harnesses.
- Includes 30" Teflon insulated lead wire, providing superior resistance to heat and chemical degradation.
- Versatile 4" rod length allows for custom field adjustments to fit various S1 style sensor applications.
- Direct replacement compatibility for multiple gas-fired appliance brands, reducing truck stock requirements.
How do I know if the Robertshaw 10-227 is compatible with my specific furnace model?
This is an S1-style universal replacement. As long as your system uses a 1/4" quick connect and the rod can be positioned within the flame path, it should function correctly. Always verify the microamp signal at the control board after installation.
Can the sensor rod be adjusted if the alignment is off?
Yes, the rod is designed to be bent or cut to match the original profile. Use caution to ensure the rod does not ground out against the burner or manifold during the adjustment.
What causes this sensor to fail in the field?
Carbon buildup or "sooting" is the most common cause of poor signal. While cleaning can temporarily restore function, pitting on the rod surface often necessitates a full 10-227 replacement to ensure reliable ion sensing.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're troubleshooting ignition sequence failures in gas-fired equipment, the Robertshaw 10-227 Sensor is a reliable solution for restoring proper flame rectification signals to the control board. This S1 replacement sensor is built with high-performance Kanthol sensor rods capable of withstanding extreme combustion environments up to 1800°F (982°C). Designed for wide compatibility across central furnaces and commercial boilers, it features a 1/4" quick connect terminal for a secure, low-resistance electrical pathway.
For field versatility, the 4-inch rod of this commercial flame sensor can be carefully bent or cut to match the specific geometry of the original OEM part. To ensure thermal integrity, the assembly includes 30 inches of Teflon insulated lead wire rated for 482°F (250°C), preventing wire degrade near the burner manifold. Whether you are performing a routine preventative maintenance check or an emergency furnace flame sensor replacement, the Robertshaw 10-227 offers the precision required for safe and consistent pilot or main burner detection.
Key Benefits:- High-temperature Kanthol sensor rod maintains structural integrity in environments up to 1800°F.
- Features a standard 1/4" QC (Quick Connect) for seamless integration with existing wiring harnesses.
- Includes 30" Teflon insulated lead wire, providing superior resistance to heat and chemical degradation.
- Versatile 4" rod length allows for custom field adjustments to fit various S1 style sensor applications.
- Direct replacement compatibility for multiple gas-fired appliance brands, reducing truck stock requirements.
How do I know if the Robertshaw 10-227 is compatible with my specific furnace model?
This is an S1-style universal replacement. As long as your system uses a 1/4" quick connect and the rod can be positioned within the flame path, it should function correctly. Always verify the microamp signal at the control board after installation.
Can the sensor rod be adjusted if the alignment is off?
Yes, the rod is designed to be bent or cut to match the original profile. Use caution to ensure the rod does not ground out against the burner or manifold during the adjustment.
What causes this sensor to fail in the field?
Carbon buildup or "sooting" is the most common cause of poor signal. While cleaning can temporarily restore function, pitting on the rod surface often necessitates a full 10-227 replacement to ensure reliable ion sensing.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
